2024-2026 Skoda Superb SUV Driver assist systems -> Traffic sign recognition User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driver assist systems -> Traffic sign recognition for Your Skoda Superb SUV Fourth Generation (2024-2026)

184 Driver assist systems › Traffic sign recognition  
Driving situations in which a system warning oc-  
curs  
A very fast approaching vehicle.  
The vehicle is driving through a sharp bend or a  
roundabout.  
Settings  
In the instrument cluster display  
In the menu Assist systems  
.
In Infotainment  
In the menu  
.
Your vehicle is being overtaken by vehicle A . The  
faster vehicle A approaches, the sooner the warning  
is given by the indicator light.  
Troubleshooting  
Message regarding system unavailability  
Stop the engine and start again.  
If the system is still not available, seek the help of a  
specialist garage.  
Vehicle B is overtaken by your vehicle at a speed  
that is faster by max. 10 km/h. If the speed is higher  
during the overtaking process, no warning will be  
provided by the indicator light.  
Traffic sign recognition  
Indicator light  
illuminates - There is another vehicle behind your  
vehicle  
Usage  
The road sign recognition shows road signs in the  
display of the instrument cluster. This also indicates  
exceeding the speed limit.  
flashing - There is another vehicle behind your ve-  
hicle, and the turn signal on the same side is switch-  
ed on  
WARNING  
For vehicles with Lane Assist, the indicator light will  
also flash if your vehicle crosses the lane markings in  
the direction of the approaching vehicle. The system  
will trigger a steering wheel vibration in this case.  
Road signs on the road always have priority over the  
road signs shown on the display.  
For this, Lane Assist must be activated and the lane  
marking between the vehicles must be detected.  
Functionality  
Displayed road signs  
Speed limits  
Overtaking prohibited  
Driving bans – one-way traffic  
Additional characters, e.g. speed limit in wet condi-  
tions  
Operating conditions  
The driving speed is higher than 15 km/h.  
No accessories are connected to the trailer sock-  
et.  
Towing a trailer  
If a trailer or other accessory is connected to the  
trailer socket, trailer-relevant road signs are also dis-  
played.  
Function restriction  
The system cannot detect lane width. For this rea-  
son, it may, for example, draw attention to a vehicle  
in a distant lane in the following cases:  
Driving on roads without speed limits  
If you are on a road with no speed limits, the road  
signs will appear in the display.  
The vehicle is driving on a road with narrow lanes  
or on the lane edge.  
Example of road sign display  
The vehicle is taking a turn.  
The system can draw attention to objects along the  
road, such as high guard rails or noise barriers.  
In the following cases, the system does not have to  
issue a warning of a vehicle, or the warning may be  
issued incorrectly:  
If the weather conditions are unfavourable.  
Driver assist systems › Crew Protect Assist proactive occupant protection 185  
Example of additional characters  
Crew Protect Assist proactive occupant  
protection  
Example of several simultaneously rec-  
ognised road signs.  
Usage  
The system of proactive occupant protection trig-  
gers measures to protect vehicle occupants in dan-  
gerous situations.  
At the same time, a red display regarding the  
speed limit appears in the speedometer.  
Speed units  
The speed indications in the road signs shown refer  
to the speed units that are common in the country.  
Functionality  
If the system evaluates the situation as critical, it  
triggers the following safety measures:  
For example, the display may refer to 30 km/h or  
30 mph depending on the country.  
Open windows are closed except for a small gap.  
The sliding/tilting roof is closed.  
The front seat belts are tightened on the body.  
Restriction  
The system function may be restricted in the follow-  
ing cases:  
The system response depends on the selected  
driving mode.  
The sensor is blinded by the sun or oncoming traf-  
fic.  
The field of view of the sensor is limited by an ob-  
stacle or a preceding vehicle.  
If the weather conditions are unfavourable.  
The vehicle is moving at high speed.  
The road signs are hidden, damaged, or are non-  
standard.  
The road signs are attached to flashing neon signs.  
The navigation map documents are not up-to-date  
or not available.  
Risk of frontal impact  
Applies to vehicles with the Front Assist system.  
The system triggers safety measures when it de-  
tects the impending danger of a frontal impact.  
Driver inactivity hazard  
Applies to vehicles with assist systems for emergen-  
cy situations.  
The system triggers safety measures when it de-  
tects the impending danger if the driver is inactive.  
Function restriction  
Settings  
The function may be restricted or unavailable in the  
following cases:  
Activation / deactivation and setting  
In the Infotainment system, in the menu  
.
When deactivated in the infotainment in the menu  
When deactivating the ASR or activating the ESC  
Sport  
When reversing  
If there is a malfunction in the ESC, reversible seat  
belt or airbag system  
If there is a malfunction or limitation of the Front  
Assist system  
Traffic Sign Recognition  
Show in instrument cluster - Activation/deactivation of  
the additional road signs in the display of the in-  
strument cluster  
Speed warning: - Configures a warning when the  
speed limit is exceeded  
Warning at over - Increases the speed limit for the  
If there is a malfunction or restriction of the Emer-  
gency Assist assist systems  
warning when exceeding the permitted speed  
Trailer detection  
Show road signs relevant to trailers Activation/deactivation  
of the display of road signs relevant to trailers  
Use for route calculation - Activation/deactivation taking  
trailers in account for route calculation in naviga-  
tion  
Tap on maximum speed for trailers - Setting the speed limits  
Settings  
Automatic activation  
The system is automatically activated when the igni-  
tion is switched on.  
for trailer operation  

Related Topics

Popular Owner Manuals