Get Interior equipment -> Luggage cover Guide for Subaru Outback SUV Second Generation (2000-2004)

6-22

Floor mat (if equipped)

CAUTION

Make sure the driver’s floor mat is placed back in its proper loca-

tion and correctly secured on its retaining pin. If the floor mat

slips forward and interferes with the movement of the pedals dur-

ing driving, it could cause an accident.

HB6016BAHB6015BA

A retaining pin is located on the driver’s side of the vehicle next to the

fuel filler door release. The floor mat is secured using the built-in grom-

met, by placing the grommet over the pin and pushing downward.

Luggage cover (if equipped)

WARNING

Do not place anything on the extended cover. Putting excessive

weight on the extended cover can break it and an object on the

cover could tumble forward in the event of a sudden stop or colli-

sion. This could cause serious injury.

The luggage cover is provided for covering the cargo area and to pro-

tect its contents from direct sunlight. This cover is detachable to make

room for additional cargo.

Interior equipment

6-23

– CONTINUED –

B Using the cover

HB7015BA

To extend the cover, pull the end of the cover out of the housing, then

insert its hooks into the catches as shown. To rewind it, unhook it from

the catches and it will rewind automatically. You should hold on to the

cover and guide it back into the cover housing while it is rewinding.

B To remove the cover

HB7017BAHB7016BA

1. Rewind the cover.

2. To take it off the cover rails, lift it out while pressing the release

knobs located both sides of the cover housing.

3. Store the cover in the cargo area.

To install the cover:

Hang the both ends of the cover housing on the cover rails. Make

sure that the cover is mounted securely by pulling it up.

Interior equipment -> Luggage cover for Your Subaru Outback SUV Second Generation (2000-2004)