Get Keys and doors -> Tilting/sliding moonroof (Sedan) Guide for Subaru Outback SUV Third Generation (2005-2009)

Black plate (119,1)

北米Model "A2420BE-B" EDITED: 2006/ 7/ 26

& Tilting/sliding moonroof (Se-

dan)

! Tilt function

1) Tilt up

2) Tilt down

The tilting function will only operate when

the moonroof is fully closed.

Push the rear side of the “Tilt” switch to

raise the moonroof.

Push the front side of the “Tilt” switch to

lower the moonroof.

Release the switch after the moonroof has

been raised or has been lowered com-

pletely. Pushing the switch continuously

may cause damage to the moonroof.

NOTE

One-touch operation does not take

place when the moonroof is tilted up

and down. Push the switch continu-

ously to tilt the moonroof up and down.

! Sliding function

1) Open

2) Close

Push the “Open/Close” switch rearward to

open the moonroof. The sun shade will

also be opened together with the moon-

roof.

Push the “Open/Close” switch forward to

close the moonroof. The moonroof will

stop halfway if you continue to press on

the switch. Release the switch once and

push it again to close th e moonroof

completely.

To stop the moonroof at a selected mid-

way position while opening or closing it,

momentarily push the switch to the

“OPEN” or “CLOSE” side.

After washing the vehicle or after it rains,

wipe away water on the roof prior to

opening the moonroof to prevent drops

of water from falling into the passenger

compartment.

! Anti-entrapment function

When the moonroof senses an object

trapped between its glass and the vehi-

cle’s roof during closure, it automatically

moves back to either of the following

positions according to the point at which

it senses the object:

. When the moonroof senses the object

at a point between the halfway stop

position and fully closed position, it moves

back to the halfway stop position and

stops there.

. When the moonroof senses the object

at a point between the halfway stop

position and fully open position, it moves

back to the fully open position and stops

there.

The anti-entrapment function may also be

activated by a strong shock on the moon-

roof even when there is nothing trapped.

Keys and doors 2-27

– CONTINUED –

Black plate (120,1)

北米Model "A2420BE-B" EDITED: 2006/ 7/ 26

2-28 Keys and doors

NOTE

For the sake of safety, it is recom-

mended that you avoid driving with the

moonroof fully opened.

! Sun shade

The sun shade can be slid forward or

backward by hand while the moonroof is

closed.

If the moonroof is opened, the sun shade

also moves back.

& Moonroof (Station wagon)

The front moonroof has a tilting function

and the rear moonroof has a sliding

function.

Both moonroofs operate only when the

ignition switch is in the “ON” position.

! Tilting moonroof

1) Open

2) Close

To tilt up the front moonroof, open the sun

shade and pull the switch to the “OPEN”

side.

To tilt down the front moonroof, push the

switch to the “CLOSE” side, then quickly

release it. If you wish to stop the tilting-

down motion of the front moonroof part-

way, either pull the switch to the “OPEN”

side or push it to the “CLOSE” side.

! Sliding moonroof

1) Open

2) Close

To fully open the rear moonroof, tilt up the

front moonroof then pull the switch to the

“OPEN” side and quickly release it. The

rear moonro of will stop at a po sition

approximately 6.7 in (17 cm) from its fully

closed position.

After confirming safety, pull the switch to

the “OPEN” side again and quickly release

it. The rear moonroof will open to its fully

open position. To stop the rear moonroof

at some selected mid-way point while it is

moving toward its fully open position,

momentarily push the switch to the

“CLOSE” or “ OPEN” side.

To fully close the rear moonroof, push the

switch to the “CLOSE” side then quickly

Keys and doors -> Tilting/sliding moonroof (Sedan) for Your Subaru Outback SUV Third Generation (2005-2009)

Related Topics

Popular Owner Manuals

Latest Owner Manuals