2010-2014 Subaru Outback SUV Audio -> Bluetooth audio User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Audio -> Bluetooth audio for Your Subaru Outback SUV Fourth Generation (2010-2014)

& Volume control switch
Press the switch to the “+” side to increase
the volume. Press the switch to the “−”
side to reduce the volume.
A number indicating the volume will be
shown on the audio display.
& MUTE button (if equipped)
Press this button if you wish to immedi-
ately cut the volume to zero.
The audio display will show “MUTE”.
If you press the button again, the original
sound volume will return and “MUTE”
turns off.
Bluetooth
®
audio
NOTE
For models with the genuine SUBARU
navigation system, refer to the Owner’s
Manual supplement for the navigation
system.
NOTE
The Bluetooth word mark and logo are
registered tr ademarks of Bl uetooth
SIG, Inc.
This function enables you to play back
audio source s from Bluetooth
®
audio
devices. You need to register the Blue-
tooth
®
audio device in the system before
using it.
Audio 5-39
– CONTINUED –
5-40 Audio
NOTE
. The Bluetooth
®
audio function may
not operate properly under the follow-
ing conditions.
– The device is turned off.
– The battery of the device has run
down.
– The device is not connected to
the system.
– The device is behind the seat or
in the glove box.
– A metal material is covering or
touching the device.
. Depending on the type of device that
is used, operation and sound volume
may be different from normal use of
those devices.
. The sound quality may degrade due
to the influence of the device that is
connected to the system or the circum-
stances of the Bluetooth network.
. When another Bluetooth
®
device is
simultaneously connected, noise may
be heard.
& Media format
Bluetooth
®
audio devices cann ot be
connected if they are not compatible with
the following Bluetooth
®
profiles.
. A2DP (Advanced Audio Distribution
Profile)
. AVRCP (Audio/Video Remote Control
Profile)
& Setting Bluetooth
®
audio
(type A audio)
1. Select “BT-A SETUP” by pressing the
“MENU” button.
2. Perform the following procedure by
operating the “TUNE” dial while “BT-A” is
displayed.
NOTE
You cannot set Bluetooth
®
audio while
driving.
! Registering (pairing) device
NOTE
Only one device can be registered.
1. Select the “PAIR AUDIO” menu.
– If a device is already registered,
“MEMORY FULL” is displayed and the
mode changes t o the Bluetooth
®
audio setting mode.
2. After the passkey is shown on the
display, input the passkey into the device.
– If the registering procedure is fin-
ished, “PAIRED” and the name of the
device are displayed.
– If the registering procedure was not
successful, “FAILED” is displayed.
After the name of the device or “FAILED”
is displayed, the mode changes to the
Bluetooth
®
audio setting mode.
NOTE
After the ignition switch is turned to the
“LOCK”/“OFF” position, the registered
device is not automatically connected
to the system even if the ignition switch
is turned to the “Acc” or “ON” position.
! Selecting device
1. Select the “SELECT AUDIO” menu.
– If no devices are registered,
“EMPTY” is displayed and the mode
changes to the Bluetooth
®
audio
setting mode.
2. Select the “CONFIRM” menu.
– Then the name of the selected
device is displayed.
– If the device is connected, “SE-
LECTED” is displayed and the mode
changes to the Bluetooth
®
audio
setting mode.
– If the device cannot be connected,
“FAILED” is displayed and the select-
ing procedure was not successful.
! Setting passkey
1. Select the “SET PASSKEY” menu.
– After the currently set passkey is
displayed, a new passkey can be
entered.
2. Input the new passkey (a 4 - 8 digit
number) by operating the “TUNE” dial.
3. Select the “CONFIRM” menu.
– The new passkey is displayed, the
passkey is changed and the mode
changes to the Bluetooth
®
audio
setting mode.
! Deleting device
1. Select the “DELETE AUDIO” menu.
– If no devices are registered,
“EMPTY” is displayed and the mode
changes to the Bluetooth
®
audio
setting mode.
2. Select the “CONFIRM” menu.
– “DELETED” is displayed and the
mode changes to the Bluetooth
®
audio setting mode.
& Setting Bluetooth
®
audio
(type B audio)
1. Press the
button to select the
“BT Audio” mode.
Talk switch
2. Press the talk switch
.
NOTE
If a device and a cell phone are already
registered, “BT” menu will be dis-
played. T hen perform the following
procedure.
(1) Press the talk switch
and
say “Setup”.
(2) Press the talk switch
again
and say “Bluetooth audio setup”.
The “BT Audio Setup” will then be
displayed.
3. After the “BT Audio Setup” menu is
displayed, select the following menus by
using the voice command system or by
operating the “TUNE” dial.
NOTE
. You cann ot set Bluetooth
®
audio
while driving.
. After the ignition switch is turned to
the “LOCK”/“OFF” position, the regis-
tered device/cell phone may be auto-
matically connected to the system if
the ignition switch is turned to the
“Acc” or “ON” position.
. When a cell phone is already con-
nected, the system will disconnect the
phone to setup a new device. You may
need to reconnect the phone after
setup is complete.
. Up to 2 de vices (exclud ing cell
phones for Hands-free system) can be
registered.
. Up to 6 devices (including cell
phones for Hands-free system) can be
registered.
! By using voice command system
NOTE
If no devices are registered, you can
only select from the following menu.
. “Pair audio player” (refer to “Regis-
tering (pairing) device” F5-42)
. “Set passkey” (refer to “Selecting
device” F5-42)
Audio 5-41
– CONTINUED –
5-42 Audio
! Registering (pairing) device
1. Press the talk switch
and say “Pair
audio player”.
2. Press the talk switch
and say the
name of the device to be registered.
3. Press the talk switch
.
4. Say “Confirm” to register the device, or
say “Go back” to go back.
5. After saying “Confirm”, the passkey
will be shown on the display. Then input
the passkey into the device.
– If the registering procedure is fin-
ished, “Audio Players Paired.” will be
displayed.
– If the registering procedure was not
successful, “Unable to pair audio
players.” will be displayed.
! Selecting device
1. Press the talk switch
and say
“Select audio player”.
2. Press the talk switch
.
3. Say the name of the registered device,
or “List audio players” and select the
registered device (for details, refer to “List
audio player function” F5-42).
4. Press the talk switch
and say
“Confirm”.
5. Press the talk switch
and say
“From car” or “From audio”.
6. Press the talk switch
.
7. Say “Confirm” to select the device, or
say “Go back” to go back.
– If the device is connected, “Se-
lected” will be displayed.
– If the device cannot be connected,
“Failed” will be displayed.
! Changing the registered name
1. Press the talk switch
and say
“Change name”.
2. Press the talk switch
.
3. Say the name of the registered device,
or “List audio players” and select the
registered device (for details, refer to “List
audio player function” F5-42).
4. Press the talk switch
.
5. Say “Confirm” to select the device, or
say “Go back” to go back.
6. After saying “Confirm”, press the talk
switch
.
7. Say a new name to be registered.
8. Press the talk switch
.
9. Say “Confirm” to change the name, or
say “Go back” to go back.
– If the name is changed, “Name
changed.” will be displayed.
! List audio player function
The names of the registered devices are
spoken by using the list audio player
function. To use the l ist audio pl ayer
function, perform the following procedure.
1. Press the talk switch
and say “List
audio player”.
– The names will then be spoken.
2. Press the talk switch
while the
name is being spoken to select the device.
– After the talk switch is pressed,
“Audio player selected.” will be dis-
played.
3. Press the talk switch
and say the
following words.
. “Select audio player” (refer to “Se-
lecting device” F5-42)
. “Change name” (refer to “Changing
the registered name” F5-42)
. “Delete audio player” (refer to “De-
leting device” F5-43)
! Setting passkey
1. Press the talk switch
and say “Set
passkey”.
2. Press the talk switch
and say the
new passkey (a 4 - 8 digit number).
3. Press the talk switch
.
4. Say “Confirm” to set the passkey, or
say “ Go back” to go back.
– If the passkey is set, the new
passkey will be displayed.
! Deleting device
1. Press the talk switch
and say
“Delete audio player”.
2. Press the talk switch
.
3. Say the name of the device, or “List
audio player” and select the device (for
details, refer to “List audio player function”
F5-42).
4. Press the talk switch
.
5. Say “Confirm” to delete the device, or
say “Go back” to go back.
– If the device is deleted, “Deleted.”
will be displayed.
! By operating the dial
Select the menu by turning and pressing
the “TUNE” dial.
NOTE
. Select the “Go Back” menu to go
back to the previous menu.
. If no devices are registered, you can
only select from the following menu.
– “Pair Audio Players” to register
the device (refer to “Registering
(pairing) device” F5-43)
– “Set Pas ske y” to set a new
passkey (refer to “Setting passkey”
F5-44)
! Registering (pairing) device
1. Select the “Pair Audio Players” menu.
2. Select the “Record Name” menu.
3. Say the name of the device to be
registered.
4. Select the “Confirm pair audio?” menu.
– The passkey will then be shown on
the display.
5. Input the passkey into the device.
– If the registering procedure is fin-
ished, “Audio Players Paired.” will be
displayed.
– If the registering procedure was not
successful, “Un able to pair audio
players.” will be displayed.
! Selecting device
1. Select the “Select Audio Player” menu.
2. Select the preferred device.
3. Select the “Confirm select audio
player?” menu.
4. Select the “From Car” menu or “From
Audio Player” menu.
5. Select the “Confirm select audio
player?” menu.
– If the device is connected, “Se-
lected” will be displayed.
– If the device cannot be connected,
“Failed” will be displayed.
! Changing the registered name
1. Select the “Change Name” menu.
2. Select the preferred device.
3. Select the “Record Name” menu.
4. Say the new name.
5. Select the “Confirm name change?”
menu.
– If the name is changed, “Device
na me has been change d.” will be
displayed.
! List audio player function
For details about the list audio player
function, refer to “List audio player func-
tion” F5-42.
1. Select the “List Audio Players” menu.
– The names will then be spoken.
2. Press the talk switch
while the
name is being spoken to select the device.
– After the talk switch is pressed,
“Audio player selected.” will be dis-
played.
3. Select from the following menu.
. “Select Audio Player” (refer to “Se-
lecting device” F5-43)
. “Change name” (refer to “Changing
the registered name” F5-43)
. “Delete Audio Player” (refer to “De-
leting device” F5-44)
Audio 5-43
– CONTINUED –
5-44 Audio
! Setting passkey
1. Select the “Set Passkey” menu.
2. Press the “TUNE” dial.
3. Input the new passkey (a 4 - 8 digit
number) by turnin g and pressing the
“TUNE” dial.
4. After inputting the new passkey, press
the “TUNE” dial again.
– If the passkey is set, the new
passkey will be displayed.
! Deleting device
1. Select the “Delete Audio Player”
menu.
2. Select the preferred device.
3. Select the “Confirm delete audio
Player?” menu.
– If the devic e is deleted, “Audio
player has been de leted .” will be
displayed.
& Bluetooth
®
audio operation
NOTE
Depending on the connected device, it
may not activate as per the following
items or not work smoothly. Refer to
the i nstruction manual of the con-
nected device.
! How to play back
Type A audio
Type B audio
Press the “CD/AUX” button and select the
“BT-A” (type A audio)/“BT Audio” (type B
audio) mode.
! To select a track from the beginning
Select a track in the same way as for a
CD. Refer to “To select a track from the
beginning” F5-21.
! Repeating (type A audio)
Repeating is operated in the same way as
for a CD. Refer to “Repeating” F5-22.
Each time you briefly press the
button, the mode changes in the following
sequence.
! Random playback (type A audio)
Random playback is operated in the same
way as for a CD . Refer to “Random
playback” F5-22. Each time you press
and hold the
butt on, the mode
changes in the following sequence.
! Display selection (type A audio)
Select an indication in the same way as
for a CD. Refer to “Display selection (type
A audio)” F5-24. Each time you briefly
press the
bu tton, the indication
changes in the following sequence.
! Fast-forwarding and rewinding
(type B audio)
Fast-forwarding and rewinding are oper-
ated in the same way as for a CD. Refer to
“Fast-forwarding and rewinding” F5-21.
! Folder selection
Select a folder in the same way as for a
CD. Refer to “Folder selection” F5-24.
Hands-free system
NOTE
. For models with the genuine
SUBARU navigation system, refer to
the Owner’s Manual supplement for the
navigation system.
. Wh en selling your vehicle, make
sure that you initialize the Hands-free
system to prevent personal data from
being improperly accessed.
The Hands-free system operates while the
ignition switch is in the “Acc” or “ON”
position.
& Tips for the Hands-free sys-
tem
! Bluetooth
®
It is possible to connect a cell phone to the
in-vehicle equipment through the Blue-
tooth
®
format (wireless) to make a phone
call from the in-vehicle equipment or take
an incoming phone call.
Since the Bluetooth
®
format is wireless, a
connection between the in-vehicle equip-
ment and the cell phone can be made
without placing them in close vicinity of
each other. The cell phone can be used
with it left in the breast pocket or bag.
NOTE
. The Han ds-free syst em may not
operate properly under the following
conditions.
– The cell phone is turned off.
– The cell phone is not in the
phone call area.
– The battery of the cell phone has
run down.
– The cell phone is not connected
to the Hands-free system.
– The cell phone is behind the seat
or in the glove box.
– A metal material covers or
touches the cell phone.
. Depending on the type of cell phone
that is used, the screen on the cell
phone may remain illuminated while
the ignition switch is in the “ON”
position. If this occurs, turn the illumi-
nation off by adjusting the cell phone
settings.
. Depending on the setting of the cell
phone, the dial lock function may be
activated after making a call. Deacti-
vate the automatic dial lock function of
the cell phone before using the Hands-
free system.
. Depending on the type of cell phone
that is used, operation and the sound
volume may be different from those of
cell phones currently used.
. When the ignition switch is turned to
the “LOCK”/“OFF” position during a
call, the call may be disconnected or
continued on the cell phone depending
on the type of cell phone that is used.
Note that operation of the cell phone
may be necessary if the call is con-
tinued on the cell phone.
. Do not speak at the same time as the
other party during a call. If you and the
party speak at the same time, it may be
difficult for the other party to hear your
voice and vice versa. This is normal.
. The receiver sound volume should
be set as low as possible. Otherwise,
the party you are calling may notice an
undesirable echo sound.
. Speak clearly and loudly.
. Your voice may be difficult to be
heard by the party under the following
conditions.
– Driving on a rough road.
– Driving at a high speed.
– Driving with a window open.
– When air from the ventilator
blows directly towards the micro-
phone.
– When the sound coming from the
ventilator is loud.
– When the cell phone is too close
to the microphone.
Audio 5-45
– CONTINUED –

Related Topics

Popular Owner Manuals