Get Audio -> Hands-free system Guide for Subaru Outback SUV Fourth Generation (2010-2014)

Hands-free system

NOTE

. For models with the genuine

SUBARU navigation system, refer to

the Owner’s Manual supplement for the

navigation system.

. When selling your vehicle, make

sure that you initialize the Hands-free

system to prevent personal data from

being improperly accessed.

The Hands-free system operates while the

ignition switch is in the “Acc” or “ON”

position.

& Tips for the Hands-free sys-

tem

! Bluetooth

It is possible to connect a cell phone to the

in-vehicle equipment through the Blue-

tooth

format (wireless) to make a phone

call from the in-vehicle equipment or take

an incoming phone call.

Since the Bluetooth

format is wireless, a

connection between the in-vehicle equip-

ment and the cell phone can be made

without placing them in close vicinity of

each other. The cell phone can be used

with it left in the breast pocket or bag.

NOTE

. The Hands-free system may not

operate properly under the following

conditions.

– The cell phone is turned off.

– The cell phone is not in t he

phone call area.

– The battery of the cell phone has

run down.

– The cell phone is not connected

to the Hands-free system.

– The cell phone is behind the seat

or in the glove box.

– A metal material covers or

touches the cell phone.

. Depending on the type of cell phone

that is used, the screen on the cell

phone may remain illuminated while

the ignition switch is in the “ON”

position. If this occurs, turn the illumi-

nation off by adjusting the cell phone

settings.

. Depending on the setting of the cell

phone, the dial lock function may be

activated after making a call. Deacti-

vate the automatic dial lock function of

the cell phone before using the Hands-

free system.

. Depending on the type of cell phone

that is used, operation and the sound

volume may be different from those of

cell phones currently used.

. When the ignition switch is turned to

the “LOCK”/“OFF” position during a

call, the call may be disconnected or

continued on the cell phone depending

on the type of cell phone that is used.

Note that operation of the cell phone

may be necessary if the call is con-

tinued on the cell phone.

. Do not speak at the same time as the

other party during a call. If you and the

party speak at the same time, it may be

difficult for the other party to hear your

voice and vice versa. This is normal.

. The receiver sound volume should

be set as low as possible. Otherwise,

the party you are calling may notice an

undesirable echo sound.

. Speak clearly and loudly.

. Your voice may be difficult to be

heard by the party under the following

conditions.

– Driving on a rough road.

– Driving at a high speed.

– Driving with a window open.

– When air from the ventilator

blows directly towards the micro-

phone.

– When the sound coming from the

ventilator is loud.

– When the cell phone is too close

to the microphone.

Audio 5-45

– CONTINUED –

5-46 Audio

. The sound quality may degrade due

to the influence of the cell phone that is

connected to the system or the circum-

stances of the Bluetooth network.

. When another Bluetooth

device is

simultaneously connected, noise may

be heard in the voice coming from the

hands-free phone.

! Corresponding profiles for the cell

phone

. HFP (Hands Free Profile): Ver. 1.0

. OPP (Object Push Profile): Ver. 1.1

& Certification for the Hands-

free system

CAUTION

FCC WARNING

Changes or modifications not ex-

pressly approved by the party re-

sponsible for compliance could void

the user’s authority to operate the

equipment.

FCC ID: ACJ932C5ZZZ035

IC ID: 216J-C5ZZZ035

Made in Japan

NOTE

This device complies with Part 15 of

the FCC Rules and Industry Canada

licence-exempt RSS standard(s). Op-

eration is subject to the following two

conditions: (1) this device may not

cause harmful interference, and (2) this

device must accept any interference,

including interference that may cause

undesired operation of this device.

NOTE

This equipment has been tested and

found to comply with the limits for a

Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are

designed to provide reasonable protec-

tion against harmful interference in a

residential installation. This equipment

may cause harmful interference to

radio communications, if it i s not

installed and used in accordance with

the instructions. However, there is no

guarantee that interference will not

occur in a particular installation. If this

equipment does cause harmful inter-

ference to radio or television reception,

which can be determined by turning the

equipment off and on, the user is

encouraged to try to correct the inter-

ference by one or more of the following

measures.

. Reorient or relocate the receiving

antenna.

. Increase the separation between the

equipment and receiver.

. Connect the equipment into an out-

let on a circuit different from that to

which the receiver is connected.

. Consult the dealer or an experi-

enced radio/TV technician for help.

. Changes or modifications not ex-

pressly approved by the party respon-

sible for compliance could void the

user’s authority to operate the equip-

ment.

. This equipment complies with FCC/

IC radiation exposure limits set forth

for an uncontrolled equipment and

meets the FCC radio frequency (RF)

Exposure Guidelines in Supplement C

to OET65 and RSS-102 of the IC radio

frequency (RF) Exposure rules. This

equipment has very low levels of RF

energy that it deemed to comply with-

out maximum permissive exposure

evaluation (MPE). But it is desirable

that it should be installed and operated

keeping the radiator at least 20 cm or

more away from person’s body (ex-

cluding extremities: hands, wrists, feet

and ankles).

. This transmitter must not be co-

located or operated in conjunction with

any other antenna or transmitter.

! Mexico models

& Safety precautions

WARNING

. For safety reasons, avoid operat-

ing the cell phone while driving.

. Do not make a phone call while

driving. When you have an in-

coming call, stop the vehicle in a

safe location before taking the

incoming phone call. When you

have to absolutely take a phone

call, tell the caller “I’ll call you

back”. And then call the caller

back after stopping the vehicle in

a safe location.

. Part 15 FCC Rules

FCC Warning:

Any unauthorized changes of

modifications to this equipment

would void the user’s authority to

operate this device.

CAUTION

. Do not leave the cell phone in the

vehicle. The temperature in the

vehicle may become extremely

high and cause a malfunction of

the cell phone.

. When using the cell phone, be

careful not to get it close to the

in-vehicle equipment. Getting it

too close to the in-vehicle equip-

ment may result in deterioration

in tone quality or a poor connect-

ing condition.

. In the frequency band used by

this equipment, along with indus-

trial, scientific and medical

equipment such as a microwave

oven, radio stations (a license is

required) to be used by the

production line in the factory to

identify movable bodies, specific

small power radio stations (a

license is not required) and ama-

teur radio stations (a license is

r equired) are being o perated.

(These three types of radio sta-

tions are hereinafter referred to

as “other radio stations”.) Before

using this equipment, be sure to

check to see if “other rad io

stations” are being operated in

the vicinity. If there is detrimental

radio interference from this

equipment to “other radio sta-

tions”, move the equipment to

another location as soon as

possible to avoid radio interfer-

ence. The frequency band used

Audio 5-47

– CONTINUED –

5-48 Audio

by this equipment is in the 2.4

GHz zone. The FH-SS modulation

is employed as a modulation

method. The expected inflicting

interference distance is less than

33 ft (10 m). This equipment uses

a full band and can avoid a band

used by a movable body identifi-

cation device.

& Using the Hands-free system

! Turning on/off the Hands-free mode

1) OFF hook switch

2) ON hook switch

3) Talk switch

To turn on the Hands-free mode, press the

OFF hook switch

. To turn off the

Hands-free mode, press the ON hook

switch

! Preparation for using the Hands-

free system

Before using the Hands-free system, it is

necessary to register a cell phone in the

system. Perform the following procedure

to register a cell phone.

NOTE

. Up to 5 cell phones can be regis-

tered (for type A audio).

. Up to 6 cell phones (including Blue-

tooth

audio devices) can be registered

(for type B audio).

. When the ignition switch is turned to

the “Acc” or “ON” position, the regis-

tered cell phone may be automatically

connected to the system.

! Registering by operating dial

“TUNE” dial:

Type A audio

Type B audio

Select the menus by operating the “TUNE”

dial.

Type A audio:

1. Press the OFF hook switch

2. Select “ENGLISH”/“FRANÇAIS” by

operating the “TUNE” dial.

– “WELCOME!” will then be dis-

played.

3. Press the “TUNE” dial or the talk

switch

4. Select the “RECORD NAME” menu, or

press the talk switch

5. Say the name to be registered.

6. Select the “CONFIRM” menu.

– After “CAR M_MEDIA” is displayed,

a pass key will be displayed.

7. Input the displayed pass key into the

cell phone while “PKY: ****” is displayed.

Type B audio:

1. Press the OFF hook switch

– If no cell phone is registered,

“Welcome!!” is shown on the screen.

In this case, perform the procedure

after step 4.

2. Select the “Setup” menu.

3. Select the “Phone Setup” menu.

4. Select the “Pair Phone” menu.

5. Select the “Record Name” menu.

6. Say the name to be registered.

7. Select the “C onfirm pair phone?”

menu.

8. Sele ct the “Phone Onl y” menu to

Audio” menu to register internal audio in

addition to the cell phone.

9. After “Car Multi-Media” is displayed, a

pass key will be displayed.

10. Input the displayed pass key into the

cell phone while “Passkey: ****” is dis-

played.

! Registering by using voice com-

mand system (type B audio)

NOTE

If no cell phone is registered, when the

OFF hook switch

is pressed, “Wel-

come!!” is shown on the screen. In this

case, perform the procedure after step

1. Select a mode other than “BT Audio”

mode.

2. Press the talk switch

and say

“Setup”.

3. Press the talk switch

and say

“Phone Setup”.

4. Press the talk switch

and say “Pair

Phone”.

5. Press the talk switch

and say the

name to be registered.

6. Press the talk switch

and say

“Confirm”.

7. Press the talk switch

8. Say “ Phone Only” to register only a

cell phone, or say “Internal Audio” to

cell phone.

9. Press the talk switch

and say

“Confirm pair phone?”.

– After “Car Multi-Media” is displayed,

a pass key will be displayed.

10. Input the displayed pass key into the

cell phone while “Passkey: ****” is dis-

played.

! Menu list of the Hands-free system

Turn the “TUNE” dial to select a menu,

and t hen press the dial to enter the

selected menu.

Audio 5-49

– CONTINUED –

5-50 Audio

Type A audio:

First menu Second menu Third menu Details Page

PHONE BOOK*

ADD ENTRY

BY VOICE Adding a new number by voice 5-57

BY PHONE Adding a new number by cell phone 5-57

MANUAL INPUT Adding a new number by inputting manually 5-58

CALL HISTORY Adding a new number from the call history 5-58

GO BACK

LIST NAMES — Showing the list of the names registered in the phonebook 5-59

CHANGE NAME — Changing a name registered in the phonebook 5-59

SET SPD DIAL — Registering a speed dial 5-60

DELETE ENTRY — Deleting phonebook data 5-60

DEL SPD DIAL — Deleting a registered speed dial 5-60

GO BACK —

REDIAL

DIAL — Dialing a number stored in the outgoing call history memory 5-61

STORE —

Adding a new number stored in the outgoing call history

memory

5-58

DELETE — Deleting a number stored in the outgoing call history memory 5-60

GO BACK —

CALLBACK

DIAL — Dialing a number stored in the incoming call history memory 5-61

STORE —

Adding a new number stored in the incoming call history

memory

5-59

DELETE — Deleting a number stored in the incoming call history memory 5-61

GO BACK —

*: If a cell phone is not registered, the menu described in the chart is not indicated.

First menu Second menu Third menu Details Page

SETUP SECURITY

SET PIN Setting a PIN code 5-62

PHBK LOCK

Locking the phonebook 5-62

PHBK UNLOCK

Unlocking the phonebook 5-63

GO BACK

PHONE SETUP

PAIR PHONE Registering a new cell phone

5-48

SELECT PHONE Selecting a cell phone to be used 5-63

CHANGE NAME Changing the registered name of the cell phone 5-63

LIST PHONES Showing the list of the registered cell phones 5-64

SET PASSKEY Changing the pass key 5-64

DELETE Deleting the registered cell phone 5-64

GO BACK

SYSTEM SETUP

GUIDANCE VOL Setting the volume of the voice guidance 5-65

INITIALIZE Initialization 5-65

SEL LANGUAGE Selecting the language (using the Hands-free system) 5-65

GO BACK

GO BACK —

*1: If a PIN code is not registered, the menu described in the chart is not available.

*2: Up to 5 cell phones can be registered.

Audio

5-51

– CONTINUED –

5-52 Audio

Type B audio:

First menu Second menu Third menu Details Page

Phonebook* Add Entry

By Voice Adding a new number by voice 5-57

By Phone Adding a new number by cell phone 5-57

Manual Input Adding a new number by inputting manually 5-58

Call History Adding a new number from the call history 5-58

Go Back

Change Name — Changing a name registered in the phonebook 5-59

List Names — Showing the list of the names registered in the phonebook 5-59

Speed Dial — Registering a speed dial 5-60

Delete Entry — Deleting phonebook data 5-60

Delete Speed Dial — Deleting a registered speed dial 5-60

Go Back —

Redial*

Dial — Redialing 5-61

Store —

Adding a new number stored in the outgoing call history

memory

5-58

Delete — Deleting a number stored in the outgoing call history memory 5-60

Go Back —

CallBack*

Dial — Dialing a number stored in the incoming call history memory 5-61

Store —

Adding a new number stored in the incoming call history

memory

5-59

Delete — Deleting a number stored in the incoming call history memory 5-61

Go Back —

*: If a cell phone is not registered, the menu described in the chart is not indicated.

First menu Second menu Third menu Details

Page

Setup Security

Set PIN Setting a PIN code 5-62

Phonebook Lock Locking the phonebook 5-62

Phonebook Unlock Unlocking the phonebook 5-63

Go Back

Phone setup

Pair Phone Registering a new cell phone

5-48

Select Phone

Selecting a cell phone to be used 5-63

Change Phone

Name

Changing the registered name of the cell phone 5-63

List Phones

Showing the list of the registered cell phones 5-64

Set Passkey Changing the pass key 5-64

Delete Phone

Deleting the registered cell phone 5-64

Handsfree Power

Turning the Hands-free power ON/OFF 5-64

Go Back

BT Audio Setup

Pair Audio Players Registering an audio player (device)

5-43

Select Audio Player

Selecting the registered audio player (device) 5-43

Change Name

Changing the name of the registered audio player (device) 5-43

List Audio Players

Speaking the names of the registered audio players (devices) 5-43

Set Passkey Setting a new passkey for the registered audio player (device) 5-44

Delete Audio Player

Deleting the registered audio player (device) 5-44

Go Back

*1: If a cell phone is not registered, the menu described in the chart is not indicated.

*2: If a device is not registered, the menu described in the chart is not indicated.

*3: Up to 6 cell phones and Bluetooth

audio devices can be registered.

Audio

5-53

– CONTINUED –

5-54 Audio

First menu Second menu Third menu Details

Page

Setup System setup*

Guidance Volume Setting the volume of the voice guidance 5-65

Device Name Showing the device name and BD address of the audio 5-65

Reset Settings Initialization 5-65

Go Back

Go Back —

*: If a cell phone is not registered, the menu described in the chart is not indicated.

! Voice command system

NOTE

Pres s the talk switch

and say

“Help” to listen to the help guidance.

1) OFF hook switch

2) ON hook switch

3) Talk switch

To turn on the voice command system,

press the talk switch

briefly. To turn off

the voice command system, wait for 5

seconds without using the voice command

system.

The commands available for the voice

command system are listed in the follow-

ing charts.

Type A audio:

Command

English Français

1 0 (zero, oh) 0 (zéro)

2 1 (one) 1 (un)

3 2 (two) 2 (deux)

4 3 (three) 3 (trois)

5 4 (four) 4 (quatre)

6 5 (five) 5 (cinq)

7 6 (six) 6 (six)

8 7 (seven) 7 (sept)

9 8 (eight) 8 (huit)

10 9 (nine) 9 (neuf)

11 * (star) * (étoile)

12 # (pound) # (carré, dièse)

13 + (plus) + (plus)

14 callback rappel

15 redial recomposer

16 dial by number

composer par nu-

méro

17 dial by name composer par nom

18 phonebook registre

19 setup réglages

phone book add

entry

ajouter l’entrée

dans le registre

phone book

change name

modifier le nom

dans le registre

phone book delete

entry

supprimer l’entrée

du registre

phone book list

names

lister les noms du

registre

phone book set

speed dial

configurer compo-

sition abrégée pour

le registre

phone book delete

speed dial

supprimer compo-

sition abrégée pour

le registre

26 phone book unlock

déverrouiller le re-

gistre

27 cancel annuler

28 help aide

29 repeat répéter

30 go back retourner

31 dial composer

32 previous précédent

33 delete supprimer

34 store enregistrer

35 confirm confirmer

36 phone setup

réglages du télé-

phone

Audio

5-55

– CONTINUED –

5-56 Audio

37 security sécurité

38 pair phone

jumeler le télé-

phone

39 change name modifier le nom

40 select phone

sélectionner le tél-

éphone

41 list phones

lister les télé-

phones

42 set pass key

configurer le

passe-partout

43 add entry ajouter l’entrée

44 delete entry supprimer l’entrée

45 delete speed dial

supprimer compo-

sition abrégée

46 by voice vocalement

47 by phone par téléphone

48 call history historique d’appels

49 set speed dial

configurer compo-

sition abrégée

50 incoming entrant

51 outgoing sortant

52 list names lister les noms

53 set PIN configurer NIP

54 phone book lock

verrouiller le regis-

tre

Type B audio:

Command

English Français

1 0 (zero, oh) 0 (zéro)

2 1 (one) 1 (un)

3 2 (two) 2 (deux)

4 3 (three) 3 (trois)

5 4 (four) 4 (quatre)

6 5 (five) 5 (cinq)

7 6 (six) 6 (six)

8 7 (seven) 7 (sept)

9 8 (eight) 8 (huit)

10 9 (nine) 9 (neuf)

11 * (star) * (étoile)

12 # (pound) # (dièse)

13 + (plus) + (plus)

14 add entry ajouter entrée

Bluetooth Audio

setup

configuration

Audio Bluetooth

16 BT-A setup

configuration

Audio Bluetooth

17 BT-Audio setup

configuration

Audio Bluetooth

18 by phone par téléphone

19 by voice par la voix

20 call history

historique des ap-

pels

21 call transfer transfert d’appel

22 callback rappel automatique

23 cancel annuler

24 change name changer nom

25 confirm valider

26 delete supprimer

27 delete audio supprimer audio

28 delete audio player

supprimer lecteur

audio

29 delete entry supprimer entrée

30 delete phone

supprimer télé-

phone

31 delete speed dial

supprimer compo-

sition rapide

32 dial composer

33 dial by name composer par nom

34 dial by number

composer par nu-

méro

35 from audio depuis audio

36 from car depuis voiture

37 go back retour

38 hands free power

alimentation mains

libres

39 help aide

40 incoming appel d’arrivée

41 internal audio audio interne

42 list audio players

lister lecteurs

audio

43 list names lister noms

44 list phones lister téléphones

45 mute sourdine

46 next suivant

47 outgoing appel de départ

48 pair audio player

jumeler lecteur

audio

49 pair phone jumeler téléphone

phone book add

entry

annuaire ajouter

entrée

phone book

change name

annuaire changer

nom

phone book delete

entry

annuaire suppri-

mer entrée

phone book list

names

annuaire lister

noms

54 phone book lock annuaire bloquer

phone book set

speed dial

annuaire définir

composition rapide

56 phone book unlock

annuaire déblo-

quer

57 phone only

téléphone unique-

ment

58 phone setup

configuration télé-

phone

59 phonebook annuaire

phonebook delete

speed dial

annuaire suppri-

mer composition

rapide

61 previous précédent

62 redial recomposer

63 repeat répéter

64 security sécurité

65 select audio player

sélectionner lec-

teur audio

66 select phone

sélectionner télé-

phone

67 send envoyer

68 set pass key

définir mot de

passe

69 set PIN définir NIP

70 set speed dial

définir composition

rapide

71 setup configurer

72 store enregistrer

73 turn on activer

74 turn off

désactiver

! Updating phonebook data

NOTE

. The maximum number of phone-

book entries that can be registered in

the phonebook is 50 (type A audio)/20

(type B audio).

. After registering phonebook data,

you can add a phone number to the

speed dial memory. For details, refer to

“Registering speed dial” F5-59.

! Registering by voice

1. Select the “BY VOICE” menu.

2. Press the talk switch

3. Say the phone number to be regis-

tered.

4. Select the “CONFIRM” menu.

5. Perform either of the following proce-

dures.

– Select the “RECORD NAME” menu

by operating the “TUNE” dial.

– Press the talk switch

6. Say the name (voice tag) to be

registered.

7. Select the “CONFIRM” menu.

– The phone number is then regis-

tered and “STORED” (type A audio)/

“Phone number stored.” (type B audio)

is displayed.

! Registering by phone

1. Select the “BY PHONE” menu.

2. Select the “CONFIRM” (type A audio)/

“Confirm Tr ansfer phonebook entry?”

(type B audio) menu.

Audio 5-57

– CONTINUED –

5-58 Audio

3. Transfer the data from the cell phone.

For details about transferring the data,

refer to the instruction manual of the cell

phone.

NOTE

For type B audio, you can select the

data to be registered by performing

either of the following procedures until

the preferred data is displayed.

. Press the talk switch

and saying

“Previous” or “Next”.

. Operate the “TUNE” dial.

4. Select the phone number to be regis-

tered by operating the “TUNE” dial.

5. Perform either of the following proce-

dures.

– Select the “ RECORD NAME” menu

by operating the “TUNE” dial.

– Press the talk switch

6. Say the name (voice tag) to be

registered.

7. Select the “CONFIRM” menu.

– The phone number is then regis-

tered and “STORED” (type A audio)/

“Phone number stored.” (type B audio)

is displayed.

! Registering by inputting manually

1. Select the “MANUAL INPUT” menu by

operating the “TUNE” dial.

2. Input the phone number to be regis-

tered.

3. Perform either of the following proce-

dures.

– Select the “ RECORD NAME” menu

by operating the “TUNE” dial.

– Press the talk switch

4. Say the name (voice tag) to be

registered.

5. Select the “CONFIRM” menu.

– The phone number is then regis-

tered and “STORED” (type A audio)/

“Phone number stored.” (type B audio)

is displayed.

NOTE

While inputting the phone numbers, if

“GO BACK” is chosen using the

“TUNE” dial, the character that was

input last is deleted.

! Registering from call history

1. Select the “CALL HISTORY” menu.

2. Select one of the following menus.

– “INCOMING” or “OUTGOING” (type

A audio)

– “Incoming Call History” or “Outgoing

Call History” (type B audio)

3. Select the phone number by operating

the “TUNE” dial.

4. Select the “CONFIRM” menu (type A

audio).

5. Perform either of the following proce-

dures.

– Select the “RECORD NAME” menu

by operating the “TUNE” dial.

– Press the talk switch

6. Say the name (voice tag) to be

registered.

7. Select the “CONFIRM” menu.

– The phone number is then regis-

tered and “STORED” (type A audio)/

“Phone number stored.” (type B audio)

is displayed.

! Registering from redial

1. Select the “REDIAL” menu.

2. Select the phone number by operating

the “TUNE” dial.

3. Select the “STORE” menu.

4. Select the “CONFIRM” (type A audio)/

“Confirm store number?” (type B audio)

menu.

5. Perform either of the following proce-

dures.

– Select the “RECORD NAME” menu

by operating the “TUNE” dial.

– Press the talk switch

6. Say the name (voice tag) to be

registered.

7. Select the “CONFIRM” menu.

– The phone number is then regis-

tered and “STORED” (type A audio)/

“Phone number stored.” (type B audio)

is displayed.

! Registering from call back

1. Select the “CALLBACK” menu.

2. Select the phone number by operating

the “TUNE” dial.

3. Select the “STORE” menu.

4. Select the “CONFIRM” (type A audio)/

“Confirm store number? ” (type B audio)

menu.

5. Perform either of the following proce-

dures.

– Select the “ RECORD NAME” menu

by operating the “TUNE” dial.

– Press the talk switch

6. Say the name (voice tag) to be

registered.

7. Select the “CONFIRM” menu.

– The phone number is then regis-

tered and “STORED” (type A audio)/

“Phone number stored.” (type B audio)

is displayed.

! Registering speed dial

1. After registering phonebook data, per-

form either of the following procedures.

– Select the “SPEED DIAL” menu by

operating the “TUNE” dial.

– Press the talk switch

and say

“SET SPEED DIAL”.

2. Press the preset button (from

) to which you want to register the

phone number.

NOTE

If the number to be used is already

registered in speed dial, “ OVER-

WRITE?” will be displayed. Select the

“CONFIRM” menu to overwrite, or

select the “GO BACK” menu to cancel.

! List names function

The voice tags registered in the phone-

book are spoken by using the list names

function. To use the list names function,

perform the following procedure.

1. Select the “LIST NAMES” menu.

2. Choose the registered data by per-

forming either of the following procedures.

– Press the talk switch

– Operate the “TUNE” dial (type A

audio only).

After “SELECTED” is displayed, you can

choose the following menus.

. “DIAL” to make a phone call

. “CHANGE NAME” to change the name

(voice tag)

. “SET SPD DIAL”/“SET SPEED DIAL”/

“Speed Dial” to set the speed dial

. “DELETE ENTRY” to delete the name

(voice tag) from the phonebook

. “GO BACK” to go back to the menu

mode

. “HELP” to listen to the help guidance

(only when using the voice command

system)

NOTE

. After “LIST NAMES” is selected, if

the OFF hook switch

is pushed, the

selected number is called.

. After “LIST NAMES” is selected, if

no operation is performed, the mem-

ories are displayed and voice tags are

spoken. After all memories/voice tags

are displayed/spoken, “END OF LIST”

is displayed and the mode changes to

the “PHONE BOOK” menu mode.

! Changing voice tag

1. Select the “PHONE BOOK” menu.

2. Select the “CHANGE NAME” menu.

3. Select the phone number by perform-

ing one of the following procedures.

– Operate the “TUNE” dial.

– Press the talk switch

and say

the voice tag.

– Press the talk switch

, say “List

Audio 5-59

– CONTINUED –

5-60 Audio

Names” and use the list names func-

tion.

4. Select the “CONFIRM” (type A audio)/

“Confirm name change?” (type B audio)

menu (only after saying the voice tag).

– Then the selected phone number/

name is displayed.

5. Perform either of the following proce-

dures.

– Select the “ RECORD NAME” menu

by operating the “TUNE” dial.

– Press the talk switch

6. Say the new voice tag.

7. Select the “CONFIRM” (type A audio)/

“Confirm name change?” (type B audio)

menu.

– Then “CHANGED” (type A audio)/

“Name successfully changed.” (type B

audio) is displayed.

! Set speed dial

1. Perform either of the following proce-

dures.

– Select the “SET SPD DIAL” menu

(type A audio) /“Speed Dial” menu

(type B audio) by operating the

“TUNE” dial.

– Press the talk switch

and say

“SET SPEED DIAL”.

2. Select the phone number by perform-

ing one of the following procedures.

– Operate the “TUNE” dial.

– Press the talk switch

and say

the voice tag.

– Press the talk switch

, say “List

Names” and use the list names func-

tion (type B audio).

3. Select the “CONFIRM” (type A audio)/

“Confirm Name?” (type B audio) menu

(only after saying the voice tag).

4. Press the preset button (from

) to which you want to register the

phone number.

NOTE

If the number to be used is already

registered in speed dial, “ OVER-

WRITE?” will be displayed. Select the

“CONFIRM” (type A audio)/“Confirm

Overwrite speed dial?” (type B audio)

menu to overwrite, or select the “GO

BACK” menu to cancel.

! Deleting the phonebook data

1. Select the “DELETE ENTRY” menu.

2. Select the phone number by perform-

ing either of the following procedures.

– Operate the “TUNE” dial.

– Press the talk switch

and say

the voice tag.

– Press the talk switch

and use

the list names function (type B audio).

3. Select the “CONFIRM” (type A audio)/

“Confirm delete entry?” (type B audio)

menu.

– Then “DELETED” (type A audio)/

“Phonebook entry deleted.” (type B

audio) is displayed and the selected

phonebook data is deleted.

! Deleting the speed dial

1. Select the “DEL SPD DIAL ” /“DELETE

SPEED DIAL” menu.

2. Press the preset button (from

) to which you want to delete the

speed dial.

3. Select the “CONFIRM” (type A audio)/

“Confirm delete speed dial entry?” (type B

audio) menu.

– Then “DELETED” (type A audio)/

“Speed dial entry * deleted. ” (type B

audio) is displayed and the selected

speed dial is deleted.

! Deleting the redial data

1. Select the “REDIAL” menu.

2. Select the phone number by operating

the “TUNE” dial.

3. Select the “DELETE” menu.

4. Select the “CONFIRM” (type A audio)/

“Confirm delete number?” (type B audio)

menu.

– Then “DELETED” is displayed and

the selected redial data is deleted.

! Deleting the callback data

1. Select the “CALLBACK” menu.

2. Select the phone number by operating

the “TUNE” dial.

3. Select the “DELETE” menu.

4. Select the “CONFIRM” (type A audio)/

“Confirm delete number?” (type B audio)

menu.

– Then “DELETED” is displayed and

the selected callback data is deleted.

! Making a phone call

! Making a phone call by saying name

1. Press the talk switch

2. Say “DIAL BY NAME”.

3. Press the talk switch again.

4. Say the preferred name (voice tag) to

be called. For type B audio, you can use

the list names function.

5. Select the “DIAL” menu, or press the

OFF hook switch

! Making a phone call by saying

number

1. Press the talk switch

2. Say “DIAL BY NUMBER”.

3. Press the talk switch

again.

4. Say the preferred phone number to be

called.

5. Select the “DIAL” menu, or press the

OFF hook switch

! Making a phone call from speed dial

It is possible to select a phone number

from speed dial registered with the in-

vehicle equipment to make a phone call.

1. Select the top menu (phone menu).

2. Press the preset button (from

) to which the preferred number is

registered.

3. Press the OFF hook switch

NOTE

When a preset button for which num-

bers are not registered is pressed, an

error message is indicated on the audio

screen.

! Redial

1. Select the “REDIAL” menu.

2. Select the preferred number by turning

the “TUNE” dial.

3. Perform either of the following proce-

dures.

– Press the OFF hook switch

– Select the “DIAL” menu.

! Callback

1. Select the “CALLBACK” menu.

2. Select the preferred number by turning

the “TUNE” dial.

3. Perform either of the following proce-

dures.

– Press the OFF hook switch

– Select the “DIAL” menu.

! Making a phone call from list name

It is possible to select a phone number

from the list name registered with the in-

vehicle equipment to make a phone call.

For details, refer to “List names function”

F5-59.

! Top redial

1. Select the top menu (phone menu).

2. Press the OFF hook switch

and

load the outgoing call history.

3. Select the preferred number by turning

the “TUNE” dial.

4. Perform either of the following proce-

dures.

– Press the OFF hook switch

– Select the “DIAL” menu.

! Taking a phone call and declining

an incoming call

To take a phone call: Press the OFF

hook switch

Audio 5-61

– CONTINUED –

5-62 Audio

To put an incoming call on hold (only if

the cell phone has this function): Press the

ON hook switch

briefly.

To decline an incoming call (only if the

cell phone has this function): Press and

hold the ON hook switch

! Ending a call

Press the ON hook switch

! Volume control

You can adjust the phone call volume, the

voice volume and the voice guidance

volume. Refer to “Volume control switch ”

F5-39.

! Adjustable level of each volume

Volume

Range

Initial setting

Phone call 0 to 14 7

Voice 0 to 14 7

Voice guidance

0 to 6

1 to 7

*1: type A audio

*2: type B audio

& Bluetooth

setting

! Security setting

After selecting the “ SECURITY” menu,

perform the following procedure.

! Setting PIN code

The PIN code is a 4-digit number and is

used when locking the phonebook.

1. Select the “SET PIN” menu.

2. Input the current PIN code by perform-

ing one of the following procedures.

– Operate the “TUNE” dial.

– Press the talk switch

and say

the number.

3. Select the “CONFIRM” (type A audio)/

“Confirm PIN?” (type B audio) menu.

4. Input the new PIN code by performing

one of the following procedures.

– Operate the “TUNE” dial.

– Press the talk switch

and say

the number.

5. Select the “CONFIRM” (type A audio)/

“Confirm PIN?” (type B audio) menu.

! Locking the phonebook

1. Select the “PHBK LOCK”/“PHONE-

BOOK LOCK” menu.

NOTE

If the phonebook is locked, “LOCKED”

(type A audio)/“The phonebook is

locked.” (type B audio) is displayed

and the mode changes to the security

mode.

2. Input the PIN code by performing one

of the following procedures.

– Operate the “TUNE” dial.

– Press the talk switch

and say

the number.

3. Select the “CONFIRM” (type A audio)/

“Confirm PIN?” (type B audio) menu.

– If the inputted PIN code is correct,

“LOCKED” (type A audio)/“The phone-

book is locked.” (type B audio) will be

displayed and the phonebook is

locked.

NOTE

While the phonebook is locked, if the

operation restricted menu is selected,

“PHBK LOCK” (type A audio)/“Phone-

book locked!” (type B audio) is dis-

played.

! Unlocking the phonebook

1. Select the “PHBK UNLOCK”/“PHONE-

BOOK UNLOCK” menu.

NOTE

If the phonebook is not locked, “UN-

LOCK” (type A audio)/“The phonebook

is unlocked.” (type B audio) is dis-

played and the mode changes to the

security mode.

2. Input the PIN code by performing one

of the following procedures.

– Operate the “TUNE” dial.

– Press the talk switch

and say

the number.

3. Select the “CONFIRM” (type A audio)/

“Confirm PIN?” (type B audio) menu.

– If the inputted PIN code is correct,

“UNLOCKED” (type A audio)/“The

phonebook is unlocked.” (type B

aud io) will be displaye d and the

phonebook is unlocked.

! Phone setup

After selecting the “PHONE SETUP”

menu, perform the following procedure.

! Pairing phone

Refer to “Preparation for using the Hands-

free system” F5-48.

! Selecting phone

To select the registered cell phone for

connecting to the in-vehicle equipment,

perform the following procedure.

1. Select the “SELECT PHONE” menu.

– If no cell phones are registered,

“EMPTY” (type A audio)/“No Phones

have been paired.” (type B audio) is

displayed and the mode changes to

the “PHONE SETUP” mode.

2. Select the cell phone by performing

one of the following procedures.

– Operate the “TUNE” dial.

– Press the talk switch

and say

the voice tag.

– Press the talk switch

and use

the list phones function (refer to “List

phones function” F5-64.)

3. Select the “CONFIRM” (type A audio)/

“Confirm Phone selection?” (type B audio)

menu (only after saying the voice tag).

– “ SELECTED” (type A audio)/

“Phone is selected.” (type B audio) is

displayed, the selected cell phone is

connected to the in-vehicle equipment

and the mode changes to the “PHONE

SETUP” mode.

NOTE

For type A audio, if the cell phone

cannot be connected to the in-vehicle

equipment, “FAILED” is displayed and

the mode changes to the “PHONE

SETUP” mode.

! Changing the voice tag of the cell

phone

1. Select the “CHANGE NAME” (type A

audio)/“Change Phone Name” (type B

audio) menu.

– If no cell phones are registered,

“EMPTY” (type A audio)/“No Phones

have been paired.” (type B audio) is

displayed and the mode changes to

the “PHONE SETUP” mode.

2. Select the cell phone by performing

one of the following procedures.

– Operate the “TUNE” dial.

– Press the talk switch

and say

the voice tag.

– Press the talk switch

and use

the list phones function (refer to “List

phones function” F5-64.).

3. Register the voice tag. For details,

Audio 5-63

– CONTINUED –

5-64 Audio

refer to “Preparation for using the Hands-

free system” F5-48.

! List phones function

The cell phone voice tags saved in the cell

phone list are displayed by using the list

phones function.

1. Select the “LIST PHONES” menu.

– If no cell phones are registered,

“EMPTY” (type A audio)/“No Phones

have been paired.” (type B audio) is

displayed and the mode changes to

the “PHONE SETUP” mode.

2. Registered cell phones are displayed

in the saved order. While displayed, if the

“TUNE” dial is turned, the next registered

cell phone is displayed. Press the ON

hook button

to close the Hands-free

menu.

3. Select a cell phone by performing

either of the following procedures.

– Operate the “TUNE” dial.

– Press the talk switch

4. After “SE LECTED” (type A au dio)/

“Phone is selected.” (type B audio) is

displayed, you can select the following

menus.

. “SELECT PHONE” to connect the

selected cell phone

. “CHANGE NAME ” (type A audio)/

“Change Phone Name” (type B audio) to

change the voice tag

. “DELETE” (type A audio)/“ Delete

Phone” (type B audio) to d elete the

selected cell phone from the list

. “GO BACK” to go back to the “PHONE

SETUP” mode

! Setting passkey

1. Select the “SET PASSKEY” menu.

– After the currently set passkey is

displayed, a new passkey can be

entered.

2. Input the new passkey by performing

one of the following procedures.

– Operate the “TUNE” dial.

– Press the talk switch

and say

the passkey.

3. Select the “CONFIRM” (type A audio)/

“Confirm passkey?” (type B audio) menu.

– The new passkey is displayed, the

passkey is changed and the mode

changes to the “PHONE SETUP”

mode.

! Deleting registered cell phone from

the list

1. Select the “DELETE” (type A audio)/

“Delete Phone” (type B audio) menu.

2. Select a cell phone to be deleted by

performing one of the following proce-

dures.

– Operate the “TUNE” dial.

– Press the talk switch

and say

the voice tag.

– Press the talk switch

and use

the list phones function.

3. Select the “CONFIRM” (type A audio)/

“Confirm delete phone?” (type B audio)

menu.

– “DELETED” (type A audio)/“Phone

has been deleted.” (type B audio) is

displayed, the data is deleted and the

mode changes to the “PHONE SET-

UP” mode.

! Turning the Hands-free power on/off

(type B audio)

You can turn the Hands-free power on or

off. If the Hands-free power is ON, the

registered cell phones are automatically

connected to the system when the ignition

switch is turned to the “Acc” or “ON”

position.

1. Select the “ Hands-free Power” /

“Handsfree Power” menu.

2. To turn off the Hands-free power when

the Hands-free power is ON, perform

either of the following procedures.

– Press the talk switch

and say

“Turn off”.

– Select “Turn off” by operating the

“TUNE” dial.

To turn on the Hands-free power when the

Hands-free power is OFF, perform either

of the following procedures.

– Press the talk switch

and say

“Turn on”.

– Select “Turn on” by operating the

“TUNE” dial.

! System setup

After selecting the “SYSTEM SETUP”

menu, perform the following procedure.

You can select the following menus only

by operating the “TUNE” dial.

! Setting guidance volume

To set the guidance volume, perform the

following procedure.

1. Select the “GUIDANCE VOL” (type A

audio)/“Guidance Volume” (type B audio)

menu.

2. Set the guidance volume by operating

the “TUNE” dial.

! Initializing the registered data

To initialize the registered data, perform

the following procedure.

1. Select the “INITIALIZE” (type A audio)/

“Reset Settings” (type B audio) menu.

2. Select the “CONFIRM” (type A audio)/

“Confirm reset settings?” (type B audio)

menu.

– “INITIALIZED” (type A audio)/“Set-

tings have been reset.” (type B audio)

is displayed, the registered data is

initialized and the mode changes to

the last mode.

! Selecting language

To select the language, perform t he

following procedure.

Type A audio:

1. Select the “SEL LANGUAGE” menu.

2. Select the desired language by oper-

ating the “TUNE” dial.

Type B audio:

“HD/TEXT” button

1. Press and hold the “HD/TEXT” button

to select “Select Langu” menu.

2. Select the preferred langua ge by

operating the “TUNE” dial.

! Device name function (type B audio)

Select the “Device Name” menu to show

the device name and BD address of the

audio.

Audio 5-65

Audio -> Hands-free system for Your Subaru Outback SUV Fourth Generation (2010-2014)

Related Topics

Popular Owner Manuals

Latest Owner Manuals