Get Keys and doors -> Windows Guide for Subaru Outback SUV Fourth Generation (2010-2014)

2-32 Keys and doors

Windows

WARNING

To avoid serious personal injury

caused by entrapment, always con-

form to the following instructions

without exception.

. When operating the power win-

dows, be extremely careful to

prevent anyone’s fingers, arms,

neck, head or other objects from

being caught in the window.

. Always lock the passengers’ win-

dows using the lock switch when

children are riding in the vehicle.

. Before leaving the vehicle, al-

ways remove the key from the

ignition switch for safety and

never allow an unattended child

to remain in the vehicle. Failure

to follow this procedure could

result in injury to a child operat-

ing the power window.

The power windows operate only when

the ignition switch is in the “ON” position.

& Power window operation by

driver

! Driver’s side power window

switches

1) Lock switch

2) For driver’s window

3) For front passenger’s window

4) For rear left passenger’s window

5) For rear right passenger’s window

All door windows can be controlled by the

power window switch cluster at the driver

side door.

! Operating the driver’s window

1) Automatically open/close

2) Open/close

To open:

Press the switch down lightly and hold it.

The window will open as long as the

switch is held.

This switch also has a one-touch auto

down function that allows the window to

be opened fully without holding the switch.

Press the switch down until it clicks and

release it, and the window will fully open.

To stop the window halfway, pull the

switch up lightly.

To close:

Pull the switch up lightly and hold it. The

window will close as long as the switch is

held.

For some models, this switch also has a

one-touch auto up function that allows the

window to be closed fully without holding

the switch.

Pull the switch up until it clicks and release

it, and the window will fully close. To stop

the w indow halfwa y, press the s witch

down lightly.

NOTE

If the vehicle’s battery is disconnected

due to situations such as battery or

fuse replacement, the one-touch auto

up/down function is deactivated. Initi-

alize the power window to reactivate

the one-touch auto up/down function.

Refer to “Initialization of power win-

dow” F2-35.

! Anti-entrapment function (driver’s

door) (models with one-touch auto

up function)

CAUTION

. Never attempt to test this func-

tion using fingers, hands or other

parts of your body.

. The anti-entrapment function

may not operate properly if some

object gets trapped just before

the window fully closes.

NOTE

. If a window detects an impact simi-

lar to that caused by trapping an object

(for example, when the vehicle encoun-

ters a deep pothole), the anti-entrap-

ment function may operate.

. The window cannot be operated for

a few seconds after the anti-entrap-

ment function operates.

. If the vehicle’s battery is discon-

nected due to situations such as

battery or fuse replacement, the anti-

entrapment function is deactiva ted.

Initialize the power window to reacti-

vate the anti-entrapment function. Re-

fer to “Initialization of power window”

F2-35.

While closing with the one-touch auto up

function, if the window senses a substan-

tial enough object trapped between the

window and the window frame, it auto-

matically moves down slightly and stops.

! Operating the passengers’ win-

dows

To open:

Press the appropriate switch down and

hold it u ntil the wi ndow re aches the

desired position.

To close:

Pull the switch up and hold it until the

window reaches the desired position.

Keys and doors 2-33

– CONTINUED –

2-34 Keys and doors

! Locking the passengers ’ windows

1) Lock

2) Unlock

To lock:

Press the lock switch. When the lock

switch is in the lock position, the passen-

gers’ windows cannot be opened or

closed.

To unlock:

Press the lock switch again.

& Power window operation by

passengers

! Passenger’s side power window

switches

Each passenger window can be controlled

by the power window switch located on

the door.

! Operating the windows

To open:

Press the switch down and hold it until the

window reaches the desired position.

To close:

Pull the switch up and hold it until the

window reaches the desired position.

When the lock switch on the power

window switch cluster, located on the

driver’s side door, is in the lock position,

the passengers’ windows cannot be oper-

ated with the passengers’ switches.

& Initialization of power win-

dow

If the vehicle’s battery is disconnected due

to situation s such as battery or fuse

replacement, the following functions are

deactivated.

. One-touch auto up/down function

. Anti-entrapment function (if equipped)

Initialize the power window in the following

procedure to reactivate such functions.

1. Close the driver’s door.

2. Turn the ignition switch to the “ON”

position.

3. Open the driver’s side window halfway

by pushing down the power window

switch.

4. Pull up the power window switch and

close the window completely. Continue

pulling up the switch for approximately 1

second after the window is closed com-

pletely.

Trunk lid (Legacy)

WARNING

. To prevent dangerous exhaust

gas from entering the vehicle,

always keep the trunk lid closed

while driving.

. Help prevent children, adults or

animals from locking themselves

in the trunk. On hot or sunny

d ays, the temperature in the

trunk could quickly become high

enough to cause death or serious

heat-related injuries including

brain damage to anyone locked

inside, particularly for small chil-

dren.

. When leaving the vehicle, close

all windows and lock all doors.

Also make certain that the trunk

is closed.

& To open and close the trunk

lid from outside

The trunk lid can be opened using the

remote keyless entry system. Refer to

“Opening the trunk lid (Legacy)” F2-20.

To close the trunk lid, lightly press the

trunk lid down until the latch engages.

NOTE

. Do not leave your valuables in the

trunk when you leave your vehicle.

. Even when the trunk lid cannot be

opened using the remote keyless entry

system, you can open the trunk lid by

using the key. Refer to “Trunk lid

(Legacy) – if the trunk lid cannot be

opened” F9-21.

& To open the trunk lid from

inside

Press and hold the trunk lid opener switch

for more than 1 second.

Keys and doors 2-35

– CONTINUED –

Keys and doors -> Windows for Your Subaru Outback SUV Fourth Generation (2010-2014)

Related Topics

Popular Owner Manuals

Latest Owner Manuals