Get Instruments and Controls -> 3-7. Combination Meter Display (Color LCD) Guide for Subaru Outback SUV Sixth Generation (2020-2025)

(205,1)

北米Model "A2620BE-A" EDITED: 2022/ 4/ 25

& Driver Monitoring Sys-

tem OFF Indicator Light

(If Equipped)

s03aea5

This indicator illuminates when “Driver

Monitoring System” is touched to deacti-

vate Driver Monitoring System. Refer to

“Driver Monitoring System OFF indicator

light” �P435.

& Driver Monitoring Sys-

tem Temporary Stop In-

dicator Light (If

Equipped)

s03aea6

This indicator illuminates when the Driver

Monitoring System is temporarily stopped.

Refer to “Driver Monitoring System tem-

porary stop indicator light” �P435.

NOTE

The Driver Monitoring System stops

temporarily in the following circum-

stances.

. The temperature of the Driver Mon-

itoring System unit is high.

& Sonar Audible Alarm

OFF Indicator (If

Equipped)

s03ae93

This indicator illuminates when the sonar

audible alarm is turned OFF. For the

setting procedure, refer to “Car settings”

�P226.

3-7. Combination Meter Dis-

play (Color LCD)

s03bn

WARNING

Always pay adequate attention to

safe driving when operating the

combination meter display (color

LCD) while the vehicle is in motion.

When operation of the combination

meter display (color LCD) interferes

with your ability to concentrate on

driving, stop the vehicle before

performing operations on the

screen. Also, do not concentrate on

the display while driving. Doing so

may cause you to look away from the

road and could result in an accident.

Various information will be shown on the

combination meter display (color LCD).

Also, a warning message will appear on

the display if a malfunction is detected. In

addition, several settings for the displayed

content can be performed.

– CONTINUED –

Combination Meter Display (Color LCD)

203

Instruments and Controls

(206,1)

北米Model "A2620BE-A" EDITED: 2022/ 4/ 25

Combination meter display (color LCD)

1) Meter information screen (Refer to “Me-

ter Information Screen” �P205.)

2) Warning screen (Refer to “Warning

Screen” �P205.)/Basic screen (Refer to

“Basic Screens” �P208.)

3) EyeSight screen*

4) Digital speed screen (Refer to “Digital

Speed Screen” �P211.)

5) Telltale screen (Refer to “Telltale Screen”

�P207.)

6) Select lever/gear position indicator (Re-

fer to “Select Lever/Gear Position Indi-

cator” �P199.)

7) X-MODE indicator (Outback/Subaru

Outback Wilderness) (Refer to

“X-MODE Indicator (Outback/Subaru

Outback Wilderness)” �P201.)

SI-DRIVE indicator (if equipped) (Refer

to “SI-DRIVE Indicator Light” �P199.)

8) Odometer (Refer to “Odometer”

�P175.)/Double trip meter (Refer to

“Double Trip Meter” �P176.)

*: For details, refer to the separate EyeSight

Owner’s Manual.

A: Activating the EyeSight system

B: Deactivating the EyeSight system

& Basic Operation

s03bn01

Control switches

By operating or of the control

switches, the screens can be changed.

If there are some useful messages, such

as vehicle information, warning informa-

tion, etc., they will interrupt the current

screen, and appear on the display accom-

panied by a beep. If such a screen is

displayed, take proper action according to

the message shown on the screen.

The warning screen will return to the

original screen after a few seconds. While

the

information reminder is shown on

the display, it may be possible to display

Combination Meter Display (Color LCD)

204

(207,1)

北米Model "A2620BE-A" EDITED: 2022/ 4/ 25

the warning screen again. To recall the

message marked with

on the display,

press the

switch on the steering wheel.

& Welcome Screen (Opening

Animation) and Good-Bye

(Ending Animation) Screen

s03bn08

Welcome screen and Good-bye screen

are motion graphic displayed on the

combination meter display and center

information display upon entering and

exiting the vehicle.

When the driver’s door is opened and

closed after unlocking the door, the wel-

come screen (opening animation) will

appear on the combination meter display

(color LCD) for approximately 20 seconds.

When the ignition switch is turned to the

“LOCK”/“OFF” position, the combination

meter display (color LCD) gradually turns

off by showing good-bye screen (ending

animation).

NOTE

. The welcome screen and the good-

bye screen may differ in the actual

words and appearance.

. The basic screen will be shown

when the ignition switch is turned to

the “ON” position while the welcome

screen is displayed.

. Once the welcome screen appears, it

takes a certain period of time to display

it again.

. If the ignition switch is operated

after unlocking the driver’s door, the

welcome screen will not appear even

when the driver’s door is opened and

closed.

. The welcome screen will disappear

when you lock the driver’s door by

using the remote keyless entry system

(all models) or the keyless access

function (if equipped) while the wel-

come screen is displayed.

. The welcome screen including the

audio/navigation unit can be set to on

or off.

. The welcome screen can be set to on

or off. For details, refer to “General

settings” �P221 (11.6-inch display

models) or “General settings” �P239

(dual 7.0-inch display models).

. The good-bye screen can be set to

on or off. For details, refer to “General

settings” �P221 (11.6-inch display

models) or “General settings” �P239

(dual 7.0-inch display models).

& Warning Screen

s03bn05

Example of warning

If there is a warning message or a

maintenance notification, it will appear on

combination meter display (color LCD).

Take the appropriate actions based on the

messages indicated.

& Meter Information Screen

s03bn12

The meter information screen can be

changed. For details, refer to “General

settings” �P221 (11.6-inch display mod-

els) or “General settings” �P239 (dual

7.0-inch display models).

– CONTINUED –

Combination Meter Display (Color LCD)

205

Instruments and Controls

(208,1)

北米Model "A2620BE-A" EDITED: 2022/ 4/ 25

! ECO gauge

s03bn1201

The ECO gauge shows the difference

between the average rate of fuel con-

sumption since the trip meter was last

reset and the current rate of fuel consump-

tion.

The ECO gauge indicates the current fuel

efficiency as shown in the following chart.

Displayed unit

Needle position

“+” side “−” side

MPG Better Poorer

l/100km Poorer

Better

NOTE

. The ECO gauge shows only an

approximate indication.

. After resetting the trip meter, the

average rate of fuel consumption is not

shown until driving 0.6 miles (1 km).

Until that time, the ECO gauge does not

operate.

! Clock and outside temperature

s03bn1202

This screen displays the clock and outside

temperature.

NOTE

. The clock can be displayed in either

12-hour display or 24-hour display. For

details, refer to “Clock” �P252.

. You can set the temperature units to

be displayed in Celsius (8C) or Fahren-

heit (8F). For details, refer to “Car

settings” �P226 (11.6-inch display

models) or “Vehicle setting icons”

�P246 (dual 7.0-inch display models).

! Compass (if equipped)

s03bn1203

The direction of the vehicle is displayed.

Combination Meter Display (Color LCD)

206

(209,1)

北米Model "A2620BE-A" EDITED: 2022/ 4/ 25

! Driving range on remaining fuel

s03bn1204

NOTE

The driving range on the remaining fuel

is only a guide. The indicated value may

differ from the actual driving range on

the remaining fuel, so you must im-

mediately fill the tank when the low fuel

warning light illuminates.

& Telltale Screen

s03bn09

1) Telltale screen

When the corresponding situation occurs,

the following telltales will be displayed on

the telltale screen.

NOTE

. When there is warning information

to display, it will be displayed in five

warning indicators, starting on the left

in ascending order of severity.

. If there are 6 or more warning

messages to display, the indicators will

be displayed in sequential order.

Mark Name Page

Door open indicator

light

190

Engine hood open

warning light

191

AT OIL TEMP warning

light

185

All-Wheel Drive warn-

ing light

191

LED headlight warning

light

200

High beam assist indi-

cator light

199

Steering Responsive

Headlight OFF indicator

light

200

Steering Responsive

Headlight warning light

200

Engine low oil level

warning indicator

185

RAB warning light (if

equipped)

202

RAB OFF indicator (if

equipped)

202

– CONTINUED –

Combination Meter Display (Color LCD)

207

Instruments and Controls

(210,1)

北米Model "A2620BE-A" EDITED: 2022/ 4/ 25

Mark Name Page

BSD/RCTA warning in-

dicator (if equipped)

202

BSD/RCTA OFF indi-

cator (if equipped)

202

Auto Start Stop warning

light (yellow)

200

Auto Start Stop OFF

indicator light

200

Auto Start Stop indica-

tor light (green)

201

Auto Start Stop No Ac-

tivity Detected indicator

light

201

Automatic headlight

beam leveler warning

light

200

Windshield washer fluid

warning light

191

Hill descent control in-

dicator light (Outback/

Subaru Outback

Wilderness)

201

Mark Name Page

Driver Monitoring Sys-

tem operation indicator

light (green) (if

equipped)

202

Driver Monitoring Sys-

tem warning light (yel-

low) (if equipped)

202

Driver Monitoring Sys-

tem OFF indicator light

(if equipped)

203

Driver Monitoring Sys-

tem temporary stop in-

dicator light (if

equipped)

203

Icy road surface warn-

ing light

202

& Basic Screens

s03bn06

By operating the or switch on the

steering wheel, you can change the screen

that is always displayed.

Average fuel consumption screen:

AVG: Average fuel consumption

: Driving range on remaining fuel

This screen displays the average rate of

fuel consumption since the trip meter was

last reset.

NOTE

The driving range on the remaining fuel

is only a guide. The indicated value may

differ from the actual driving range on

the remaining fuel, so you must im-

mediately fill the tank when the low fuel

warning light illuminates.

Combination Meter Display (Color LCD)

208

(211,1)

北米Model "A2620BE-A" EDITED: 2022/ 4/ 25

Current fuel consumption screen:

: Current fuel consumption

: Driving range on remaining fuel

NOTE

The driving range on the remaining fuel

is only a guide. The indicated value may

differ from the actual driving range on

the remaining fuel, so you must im-

mediately fill the tank when the low fuel

warning light illuminates.

Driving information screen:

: Journey time

: Journey distance

This screen displays the journey time (the

time that has elapsed since the ignition

switch was turned to the “ON” position)

and journey distance (the distance that

has been driven since the ignition switch

was turned to the “ON” position).

Auto Start Stop screen:

: The total amount of time that the engine

was stopped by means of the Auto Start

Stop system

: The total amount of fuel saved due to the

engine being stopped by the Auto Start

Stop system

The indicated values are calculated from

the most recent reset of the currently

displayed trip meter to the current time.

The indication ranges are as follows.

Total amount of time: from 00’00@ to

9999h59’59@

. Total amount of fuel saved: from 0 gal to

9999.999 gal

NOTE

. When the trip meter is reset, the

corresponding accumulated time and

the amount of fuel saving are also reset.

– CONTINUED –

Combination Meter Display (Color LCD)

209

Instruments and Controls

(212,1)

北米Model "A2620BE-A" EDITED: 2022/ 4/ 25

. The time spent with the engine

stopped by means of the Auto Start

Stop system is also added to the

journey time.

TPMS screen (U.S.-spec. models):

This screen displays each tire pressure.

When a tire is deflated, the deflated tire

and the tire pressure will be displayed on

the screen in yellow.

NOTE

. The tire pressure values are dis-

played several minutes after driving.

. You can set the tire pressure units.

For details about setting the units, refer

to “General settings” �P221 (11.6-inch

display models) or “General settings”

�P239 (dual 7.0-inch display models).

. Once the tire pressure monitoring

system detects the low tire pressure,

the tire pressure values will display in

yellow until the system detects the

normal tire pressure.

. Immediately adjust the tire pressure

when the warning light illuminates.

When the tire pressure monitoring

system detects the adjusted tire pres-

sure, the warning light will turn off and

the tire pressure values will turn to

white.

. For information about the specified

value of the air pressure, refer to

“Tires” �P566.

Compass screen (if equipped):

The direction of the vehicle is displayed.

Navigation screen (if equipped):

When the route guidance is set in the

navigation system, this item shows the

navigation route information. For details

about the navigation system, refer to the

separate navigation/audio Owner’s Man-

ual.

Combination Meter Display (Color LCD)

210

(213,1)

北米Model "A2620BE-A" EDITED: 2022/ 4/ 25

Audio screen:

The audio screen shows the status of

audio information. For details about the

audio system, refer to the separate navi-

gation/audio Owner’s Manual.

Clock and outside temperature screen:

This screen displays the clock and outside

temperature.

NOTE

. The clock can be displayed in either

12-hour display or 24-hour display. For

details, refer to “Clock” �P252.

. You can set the temperature units to

be displayed in Celsius (8C) or Fahren-

heit (8F). For details, refer to “Car

settings” �P226 (11.6-inch display

models) or “Vehicle setting icons”

�P246 (dual 7.0-inch display models).

& Digital Speed Screen

s03bn11

1) Speed limit indicator (if equipped)

2) Vehicle speed

This screen displays the current vehicle

speed.

Combination Meter Display (Color LCD)

211

Instruments and Controls

Instruments and Controls -> 3-7. Combination Meter Display (Color LCD) for Your Subaru Outback SUV Sixth Generation (2020-2025)

Related Topics

Popular Owner Manuals

Latest Owner Manuals