Get Keys and Doors -> Disabling Keyless Access Function Guide for Subaru Outback SUV Sixth Generation (2020-2025)

(131,1)

北米Model "A2620BE-A" EDITED: 2022/ 4/ 25

& Power Saving Function of

Access Key Fob

s02ap26

This function stops the access key fob

from receiving signals and helps minimize

the battery consumption of the access key

fob.

1. Press the “

” button twice while hold-

ing the “

” button.

1) LED indicator

2. Confirm that the LED indicator blinks 4

times to notify that the setting is complete.

When the access key fob is in the power

save mode, the keyless access function

and push-button start system will not be

available.

To cancel the power save mode, press one

of the buttons on the access key fob.

& Disabling Keyless Access

Function

s02ap07

WARNING

If you have an implanted pacemaker

or an implanted defibrillator, per-

form the procedure “By operating

the driver’s door” �P131 to disable

the keyless access function. If you

perform the procedure “By operat-

ing the access key fob” �P129, the

operation of an implanted pace-

maker or implanted defibrillator

may be affected by the radio waves

from the transmitter antenna.

When the vehicle is not going to be used

for a long time, or when you choose not to

use the keyless access function, the key-

less access function can be disabled.

NOTE

. The locking and unlocking function

by the remote keyless entry system is

not disabled.

. To start the engine while the func-

tions are disabled, perform the proce-

dure described in “Starting Engine”

�P497.

! Disabling functions

s02ap0701

! By operating the access key fob

s02ap070102

To disable the keyless access function by

operating the access key fob, register a

PIN code for PIN Code Access. For details

about registering a PIN code, refer to

“Unlock Using PIN Code Access” �P126.

1. Open the driver’s door.

2. Rotate the lock lever forward.

– CONTINUED –

Keyless Access with Push-Button Start System

129

Keys and Doors

(132,1)

北米Model "A2620BE-A" EDITED: 2022/ 4/ 25

3. Press and hold the “ ” button and “ ”

button on the access key fob simulta-

neously for more than 5 seconds.

A chirp sound will be heard, and the

function will be disabled.

Keyless Access with Push-Button Start System

130

(133,1)

北米Model "A2620BE-A" EDITED: 2022/ 4/ 25

! By operating the driver’s door

s02ap070101

To disable the keyless access function by

operating the driver’s door, perform the

following procedures.

Steps Operation Time Status

1 Sit in the driver’s seat, and close the door. — Close

2 Push “

” on the power door locking switch. — Close

3 Open the driver’s door. Within 5 sec. Close?Open

Push “

” on the power door locking switch

twice.

Within 5 sec. Open

5 Close and open the driver’s door twice. Within 10 sec.

Open?Close?

Open?Close?Open

Push “

” on the power door locking switch

twice while the door is open.

Within 10 sec. Open

7 Close and open the driver’s door once. Within 10 sec. Open?Close?Open

8 Close the door. Within 5 sec.

Open?Close

A chirp will sound and the functions will be disabled.

NOTE

In steps 4 and 6, press the power door locking switch firmly. If the switch is not

pressed firmly, the functions may not be disabled.

– CONTINUED –

Keyless Access with Push-Button Start System

131

Keys and Doors

(134,1)

北米Model "A2620BE-A" EDITED: 2022/ 4/ 25

! Enabling functions

s02ap0702

When the procedure to disable the func-

tions is performed again, a chirp sound will

be heard, and the functions are enabled.

NOTE

. The keyless access function will be

enabled only if you perform the proce-

dure in the same manner you disabled

the function (for example, when dis-

abling by operating the driver’s door,

the function will not be enabled even if

you operate the access key fob).

. Press the push-button ignition

switch if you do not know the proce-

dure in which the keyless access func-

tion was disabled.

– When disabling by operating the

driver’s door: A chirp will not be

heard.

– When disabling by operating the

access key fob: A chirp will be

heard.

& Selecting Audible Signal Op-

eration

s02ap12

Using an electronic chirp, the system will

give you an audible signal when the doors

are locked or unlocked. If desired, you can

turn the audible signal off by operating the

center information display. For details,

refer to “Car settings” �P226 (11.6-inch

display models) or “Vehicle setting icons”

�P246 (dual 7.0-inch display models).

Furthermore, the volume setting of the

audible signal can also be changed by a

SUBARU dealer. Consult your SUBARU

dealer for details.

& Selecting Hazard Warning

Flasher Operation

s02ap18

Using the hazard warning flasher, the

system will give you a visible signal when

the doors are locked or unlocked. If

desired, you can turn the hazard warning

flashers off by operating the center infor-

mation display. For details, refer to “Car

settings” �P226. The setting can also be

changed by a SUBARU dealer. Consult

your SUBARU dealer for details.

& Warning Chimes and Warning

Indicator

s02ap06

The keyless access with push-button start

system is equipped with a warning chime

and the access key warning indicator in

order to minimize improper operations and

help protect your vehicle from theft.

For details, refer to “Warning Chimes and

Warning Indicator of the Keyless Access

with Push-Button Start System” �P193.

& When Access Key Fob Does

Not Operate Properly

s02ap08

Refer to “Access Key Fob – If Access Key

Fob Does Not Operate Properly” �P496.

& Replacing Battery of Access

Key Fob

s02ap09

Refer to “Replacing Battery of Access Key

Fob” �P555.

& Replacing Access Key Fob

s02ap13

Access key fobs can be replaced at

SUBARU dealers. For more details, con-

tact a SUBARU dealer.

& Certification for Keyless Ac-

cess with Push-Button Start

System

s02ap14

. U.S.-spec. models

FCC ID: HYQ14AHK

FCC ID: Y8PFJ18-2

FCC ID: Y8PSSPIMB02

CAUTION

FCC WARNING

Changes or modifications not ex-

pressly approved by the party re-

sponsible for compliance could void

Keyless Access with Push-Button Start System

132

Keys and Doors -> Disabling Keyless Access Function for Your Subaru Outback SUV Sixth Generation (2020-2025)

Related Topics

Popular Owner Manuals

Latest Owner Manuals