Consumer information and Reporting safety defects/Vehicle load limit 3 how to determine 13-11
Vehicle load limit 3 how to
loads could increase the risk of
luggage load capacity. For exam-
rollover.
ple, if the <XXX= amount equals
determine
. Stopping distance will increase.
1400 lbs. and there will be five 150
S13BU
. Brakes could overheat and fail.
lb passengers in your vehicle, the
The load capacity of your vehicle is
. Suspension, bearings, axles and
amount of available cargo and
determined by weight, not by avail-
other body parts could break or
luggage load capacity is 650 lbs.
able cargo space. The load limit of
experience accelerated wear that
(1400 2 750 (5 6 150) = 650 lbs.)
your vehicle is shown on the vehicle
will shorten vehicle life.
5. Determine the combined weight
placard attached to the driver9s side
. Tires could fail.
of luggage and cargo being loaded
door pillar. Locate the statement
. Tread separation could occur.
on the vehicle. That weight may not
<The combined weight of occupants
. Tire could separate from its rim.
safely exceed the available cargo
and cargo should never exceed
and luggage load capacity calcu-
XXX kg or XXX lbs= on your
& Steps for Determining Cor-
lated in Step 4.
vehicle9s placard.
rect Load Limit
6. If your vehicle will be towing a
The vehicle placard also shows
S13AB08
1. Locate the statement <The com-
trailer, load from your trailer will be
seating capacity of your vehicle.
bined weight of occupants and
transferred to your vehicle. Consult
The total load capacity includes the
cargo should never exceed XXX
this manual to determine how this
total weight of driver and all pas-
kg or XXX lbs.= on your vehicle9s
reduces the available cargo and
sengers and their belongings, any
placard.
luggage load capacity of your ve-
cargo, any optional equipment such
2. Determine the combined weight
hicle.
as a trailer hitch, roof rack or bike
of the driver and passengers that
carrier, etc., and the tongue load of
will be riding in your vehicle.
a trailer. Therefore cargo capacity
3. Subtract the combined weight of
can be calculated by the following
the driver and passengers from
method.
XXX kg or XXX lbs.
Cargo capacity = Load limit 2 (total
4. The resulting figure equals the
weight of occupants + total weight
available amount of cargo and
3 CONTINUED 3