Get Ignition switch (models without keyless access) -> Ignition switch light (if equipped) Guide for Subaru XV SUV Third Generation (2022-2026)

(143,1)

北米Model "A1410BE-B" EDITED: 2020/ 9/ 16

CAUTION

Do not turn the ignition switch to the

“START” position while the engine

is running.

NOTE

. To turn the key from the “ACC” to

“LOCK” position, the select lever must

be in the “P” position (CVT models) and

the key must be pushed in and turned.

. If your registered key fails to start

the engine, pull out the key once (the

security indicator light will blink), and

then insert the key again and turn it to

the “START” position again to restart

the engine.

. The engine may not start in the

following cases:

– The key grip is touching another

key or a metallic key holder.

– The key is near another key that

contains an immobilizer transpon-

der.

– The key is near or touching

another transmitter.

& Key reminder chime

S03AA05

The reminder chime sounds when the

driver’s door is opened and the ignition

switch is in the “LOCK” or “ACC” position.

The chime stops under the following

conditions.

. The ignition switch is turned to the “ON”

position.

. The key is removed from the ignition

switch.

. The driver’s door is closed.

& Ignition switch light (if

equipped)

S03AA06

For easy access to the ignition switch in

the dark, the ignition switch light illumi-

nates when the driver’s door is opened or

when the driver’s door is unlocked using

the remote keyless entry transmitter.

The light remains illuminated for several

tens of seconds and then gradually turns

off under the following conditions.

. The driver’s door is closed.

. The doors are unlocked using the

remote keyless entry transmitter.

– CONTINUED –

Instruments and controls/Ignition switch (models without “keyless access with push-button start system”)

3-5

(144,1)

北米Model "A1410BE-B" EDITED: 2020/ 9/ 16

The light turns off immediately under the

following conditions.

. The ignition switch is turned to the “ON”

position.

. All doors and the rear gate are locked

using the remote keyless entry transmitter.

Push-button ignition switch

(models with “keyless access

with push-button start sys-

tem”)

S03BG

& Safety precautions

S03BG04

Refer to “Safety precautions” F2-3.

& Operating range for push-

button start system

S03BG01

1) Antennas

2) Operating range

NOTE

. If the access key fob is not detected

within the operating range of the anten-

nas inside the vehicle, the push-button

ignition switch and the engine start

cannot be operated.

. Even when the access key fob is

outside the vehicle, if it is placed too

close to the glass, it may be possible to

switch the power or to start the engine.

. Do not leave the access key fob in

the following places. It may become

impossible to operate the push-button

ignition switch and the engine start. It

may also cause a false warning to issue

although no malfunction actually oc-

curs, or not to issue a warning when

any malfunction occurs.

– On the instrument panel

– On the floor

– Inside the glove box

– Inside the door trim pocket

– On the rear seat

– In the cargo area

. When operating the push-button

ignition switch or starting the engine,

if the access key fob battery is dis-

charged, perform the procedure de-

scribed in “Access key fob – if access

key fob does not operate properly” F9-

17. In such a case, replace the battery

immediately. Refer to “Replacing bat-

tery of access key fob” F11-46.

Instruments and controls/Push-button ignition switch (models with “keyless access with push-button start system”)

3-6

Ignition switch (models without keyless access) -> Ignition switch light (if equipped) for Your Subaru XV SUV Third Generation (2022-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals