北米Model "A1410BE-B" EDITED: 2020/ 9/ 16
Illumination brightness con-
trol
S03AJ
The illumination brightness of the instru-
ment panel illuminates under the following
conditions.
For models without “AUTO” position:
. The light switch is in the “
” or “ ”
position.
For models with “AUTO” position:
. The light switch is in the “
” or “ ”
position when the ambient light is dark.
. The light control switch is in the “AUTO”
position and the headlights illuminate
automatically.
You can adjust the illumination brightness
for better visibility.
To brighten, turn the control dial upward.
To darken, turn the control dial downward.
NOTE
. When the control dial is turned fully
upward, the illumination brightness
becomes the maximum and the auto-
matic dimming function does not work
at all.
. The brightness setting is not can-
celed even when the ignition switch is
turned to the “LOCK”/“OFF” position.
& Auto dimmer cancel function
(if equipped)
S03AJ01
When the ambient light is bright, the
illumination brightness is set to the max-
imum regardless of the position of the
control dial. In this case, you cannot adjust
the illumination brightness by using the
control dial. When the ambient light is dark,
you can dim the illumination brightness as
described above.
The operational/non-operational setting
and sensitivity of the auto dimmer cancel
function can be changed by your SUBARU
dealer. Contact your SUBARU dealer for
details.
Warning and indicator
S03AE
& Initial illumination for system
check
S03AE29
Several of the warning and indicator lights
illuminate when the ignition switch is
initially turned to the “ON” position. This
permits checking the operation of the
bulbs.
Apply the parking brake and turn the
ignition switch to the “ON” position. For
the system check, several of the following
lights illuminate and then turn off after
several seconds or after the engine has
started.
: Seatbelt warning light: The seatbelt
warning light turns off only when the
driver fastens the seatbelt.
: Front passenger’s seatbelt warning
light: The seatbelt warning light turns
off only when the front seat passenger
fastens the seatbelt.
: SRS airbag system warning light
: Front passenger’s frontal airbag ON
indicator
: Front passenger’s frontal airbag
OFF indicator
Instruments and controls/Illumination brightness control
3-12
English 
