Get Warning and indicator -> Warning chimes and warning indicator of keyless access with push-button start Guide for Subaru XV SUV Third Generation (2022-2026)

(162,1)

北米Model "A1410BE-B" EDITED: 2020/ 9/ 16

NOTE

If the warning light behavior is as

described in the following examples,

the Vehicle Dynamics Control system

may be considered normal.

. The warning light illuminates when

the ignition switch is turned to the “ON”

position and turns off approximately 2

seconds after the engine has started.

. The warning light illuminates right

after the engine is started but turns off

immediately, remaining off.

. The warning light illuminates after

the engine has started and turns off

while the vehicle is subsequently being

driven.

. The warning light illuminates during

driving, but it turns off immediately and

remains off.

. The warning light illuminates when

the engine has stalled and continues to

illuminate after the engine has been

restarted. However, it will turn off once

the vehicle starts moving.

! Vehicle Dynamics Control operation

indicator light

S03AE1402

The indicator light flashes during activation

of the skid suppression function and during

activation of the traction control function.

NOTE

. The light may remain illuminated for

a short period of time after the engine

has been started, especially in cold

weather. This does not indicate the

existence of a problem. The light

should turn off as soon as the engine

has warmed up.

. The indicator light illuminates when

the engine has developed a problem

and the CHECK ENGINE warning light/

malfunction indicator light is on.

The Vehicle Dynamics Control system is

probably malfunctioning under the follow-

ing condition. Have your vehicle checked

at a SUBARU dealer as soon as possible.

. The light does not turn off even after the

lapse of several minutes (the engine has

warmed up) after the engine has started.

& Vehicle Dynamics Con-

trol OFF indicator light

S03AE15

The light illuminates when the Vehicle

Dynamics Control OFF switch is pressed

to deactivate the Vehicle Dynamics Con-

trol system.

The Vehicle Dynamics Control system is

probably malfunctioning under any of the

following conditions. Have your vehicle

checked at a SUBARU dealer immedi-

ately.

. The light does not illuminate when the

ignition switch is turned to the “ON”

position.

. The light does not turn off even once

several seconds have elapsed after the

ignition switch has been turned to the “ON”

position.

& Warning chimes and

warning indicator of the

keyless access with

push-button start sys-

tem (if equipped)

S03AE55

Access key warning indicator

The keyless access with push-button start

system sounds a warning chime and

flashes the access key warning indicator

Instruments and controls/Warning and indicator

3-24

(163,1)

北米Model "A1410BE-B" EDITED: 2020/ 9/ 16

on the combination meter in order to

minimize improper operations and help

protect your vehicle from theft.

When the warning chime sounds and/or

the warning indicator flashes, take the

appropriate action.

WARNING

Never drive the vehicle if the indica-

tor on the push-button ignition

switch is flashing in green when

starting the engine. This indicates

the status that the steering wheel is

not released and could result in an

accident involving serious injury or

death.

CAUTION

. When starting the engine again

after the operation indicator on

the push-button ignition switch

flashes in green, if the operation

indicator is still flashing in green,

there could be a steering lock

malfunction. Contact your

SUBARU dealer as soon as pos-

sible.

. When the operation indicator on

the push-button ignition switch

flashes in orange, contact a

SUBARU dealer immediately.

NOTE

. Even when the access key fob is

within the operating ranges inside the

vehicle, the access key warning for

engine start may be provided depend-

ing on the status of the access key fob

and the environmental conditions.

. When the access key fob is taken out

of the vehicle through an open window,

the access key fob takeout warning or

passenger access key fob takeout

warning will not be provided.

! List of warnings

S03AE5504

CAUTION

When any of the following warnings

occurs even if the access key warn-

ing indicator does not appear, take

the appropriate action.

– CONTINUED –

Instruments and controls/Warning and indicator

3-25

(164,1)

北米Model "A1410BE-B" EDITED: 2020/ 9/ 16

Inside warning

chime

Outside warning

chime

Operation indicator

on push-button igni-

tion switch

Status Action

Ding, ding ...

(intermittent)

— —

The driver’s door was opened while the

push-button ignition switch is “ACC” (in

CVT models, when the select lever is in

the “P” position).

Switch the push-button ignition switch to

“OFF”, or close the driver’s door.

When exiting the vehicle, be sure to

switch the push-button ignition switch to

“OFF”.

The push-button ignition switch was

switched to “OFF” while the driver’s door

is open.

Close the driver’s door.

Ding

Short beep

(2 seconds)

—

Lockout warning:

An attempt was made to lock all doors

while the access key fob is left inside the

vehicle.

Take out the access key fob from the

vehicle, and lock the doors.

The doors cannot be locked while the

access key fob is inside the vehicle.

A chirp sound will be heard, and all doors

will be unlocked.

—

Short beep

(2 seconds)

—

Access key fob lock-in warning:

The door lock sensor was touched while

the push-button ignition switch is “OFF”

and the access key fob is inside the

vehicle.

Take out the access key fob from the

vehicle, and lock the doors.

If the access key fob is inside the vehicle,

the doors cannot be locked.

—

Beep, beep, beep,

beep, beep

(5 times)

—

Door ajar warning:

The door lock sensor is touched while the

ignition switch is in the “OFF” position and

one of the doors including the rear gate is

opened.

Close the doors securely and lock them.

If one of the doors including the rear gate

is opened, the doors cannot be locked.

Ding

Long beep (60

seconds max.)

—

Power warning:

The door lock sensor was touched while

carrying the access key fob, the push-

button ignition switch is in a position other

than “OFF” (in CVT models, when the

select lever is in the “P” position).

Return the access key fob inside the

vehicle, or switch the push-button ignition

switch to “OFF”.

If the push-button ignition switch is not

switched to “OFF”, the doors cannot be

locked.

Ding, ding ...

(7 seconds)

— —

Access key warning:

The vehicle was driven while the access

key fob is not inside the vehicle.

Carry the access key fob, and drive the

vehicle.

Instruments and controls/Warning and indicator

3-26

(165,1)

北米Model "A1410BE-B" EDITED: 2020/ 9/ 16

Inside warning

chime

Outside warning

chime

Operation indicator

on push-button igni-

tion switch

Status Action

Ding — —

Access key warning for engine start:

The push-button ignition switch was

pressed while the access key fob is not

inside the vehicle.

Carry the access key fob, and press the

push-button ignition switch.

Ding

Beep, beep, beep

(3 times)

—

Access key takeout warning:

The driver exited the vehicle with the

access key fob and closed the driver’s

door while the push-button ignition switch

is in a position other than “OFF” (in CVT

models, when the select lever is in the “P”

position).

Switch the push-button ignition switch to

“OFF”, and get out of the vehicle.

Ding

Beep, beep, beep

(3 times)

—

Passenger access key takeout warn-

ing:

A fellow passenger exited the vehicle with

the access key fob and closed a door

other than the driver’s door while the

push-button ignition switch is in a position

other than “OFF”.

Return the access key fob to inside the

vehicle, or switch the push-button ignition

switch to “OFF”.

Long beep

(continuous)

Long beep

(continuous)

—

Access key takeout without P position

warning (CVT models):

The driver exited the vehicle with the

access key fob and closed the driver’s

door while the push-button ignition switch

is in a position other than “OFF” and the

select lever is in a position other than the

“P” position.

Shift the select lever to the “P” position,

switch the push-button ignition switch to

“OFF” and exit the vehicle.

Long beep

(continuous)

— —

Select lever position warning (CVT

models):

The engine is turned off by pressing the

push-button ignition switch and the select

lever is in a position other than the “P”

position.

Start the engine, shift the select lever to

the “P” position, switch the push-button

ignition switch to “OFF” and exit the

vehicle.

– CONTINUED –

Instruments and controls/Warning and indicator

3-27

(166,1)

北米Model "A1410BE-B" EDITED: 2020/ 9/ 16

Inside warning

chime

Outside warning

chime

Operation indicator

on push-button igni-

tion switch

Status Action

Long beep

(continuous)

— —

Select lever position warning (CVT

models):

The driver’s door was opened while the

push-button ignition switch is in a position

other than “OFF” and the select lever is in

a position other than the “P” position.

Shift the select lever to the “P” position,

switch the push-button ignition switch to

“OFF” and exit the vehicle.

Ding — — The battery of the access key fob is low. Replace the battery of the access key fob.

Ding —

Flashes in green

(15 seconds max.)

Steering lock warning:

The engine start procedure was per-

formed, but the steering is still locked.

While turning the steering wheel right and

left lightly, depress the brake pedal and

press the push-button ignition switch.

Ding —

Flashes in orange

(15 seconds max.)

System malfunction warning:

A malfunction was detected in the power

system or steering lock.

Contact a SUBARU dealer immediately

and have the vehicle inspected.

Instruments and controls/Warning and indicator

3-28

Warning and indicator -> Warning chimes and warning indicator of keyless access with push-button start for Your Subaru XV SUV Third Generation (2022-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals