7-26
INSPECTION AND MAINTENANCE
81A283
Headlight aiming
Since special procedures are required, ask
your authorised Maruti Suzuki workshop
for this job.
Bulb replacement
Interior light
Remove the lens by using a flat-bladed
screwdriver covered with a soft cloth as
shown. To install it, simply push it back in.
Front
76MH0A139
WARNING
Always replace a blown fuse with a
fuse of the correct amperage. Never
use a substitute such as aluminum
foil or wire to replace a blown fuse. If
you replace a fuse and the new one
blows in a short period of time, you
may have a major electrical problem.
Have your vehicle inspected immedi-
ately by your authorised Maruti
Suzuki workshop.
CAUTION
• Light bulbs can be hot enough to
burn your finger right after turning
off lights. This is true especially for
halogen headlight bulbs. Replace
the bulbs after they become cool
enough.
• The halogen headlight bulbs are
filled with pressurized halogen gas.
They can burst and injure you if
they are hit or dropped. Handle
them carefully.
• To avoid injury by sharp-edged
parts of the body, wear gloves and
a long-sleeved shirt when replacing
light bulbs.
NOTICE
• The oils from your skin may cause
a halogen bulb to overheat and
burst when the lights are on. Grasp
a new bulb with a clean cloth.
• During bulb replacement, always
use same bulb number as used in
the vehicle.
NOTICE
Frequent bulb replacement indicates
the need for an inspection of the elec-
trical system. This should be carried
out by your authorised Maruti Suzuki
workshop.
English 
