Get Other Controls and Equipment -> Heating system Guide for Suzuki Ignis SUV Second Generation (2016-2024)

5-17

OTHER CONTROLS AND EQUIPMENT

75RM4-01E

Heating system

Description of controls

75RM312

Temperature selector (1)

This is used to select the temperature by turning the selector.

Blower speed selector (2)

This is used to turn on the blower and to select blower speed by turning the selector.

(3) (1)(4)

(2)

Air flow selector (3)

75RM022

This is used to select one of the following

functions.

VENTILATION (a)

75RM352

Temperature-controlled air comes out of

the center and side air outlets.

(a)

(b)

(e)

(d)

(c)

5-18

OTHER CONTROLS AND EQUIPMENT

75RM4-01E

BI-LEVEL (b)

75RM353

Temperature-controlled air comes out of

the floor outlets and cooler air comes out

of the center and side outlets. When the

temperature selector (1) is in the fully cold

position or fully hot position, however, the

air from the floor outlets and the air from

the center and side outlets will be the

same temperature.

HEAT (c)

75RM354

Temperature-controlled air comes out of

the floor outlets and the side outlets, also

comes out of the windshield defroster out-

lets and also comes slightly out of the side

defroster outlets.

HEAT & DEFROST (d)

75RM355

Temperature-controlled air comes out of

the floor outlets, the windshield defroster

outlets, the side defroster outlets and the

side outlets.

DEFROST (e)

75RM356

Temperature-controlled air comes out of

the windshield defroster outlets, the side

defroster outlets and the side outlets.

Air intake selector (4)

75RM059

This selector is used to select the following

modes.

FRESH AIR (f)

When this mode is selected by moving the

lever to right, outside air is used.

RECIRCULATED AIR (g)

When this mode is selected by moving the

lever to left, outside air is shut out and

inside air is recirculated. This mode is suit-

able when driving through dusty or polluted

air such as in a tunnel, or when attempting

to quickly cool down the interior.

NOTE:

If you select RECIRCULATED AIR for an

extended period of time, the air in the vehi-

cle can become contaminated. Therefore,

you should occasionally select FRESH

AIR.

(g) (f)

5-19

OTHER CONTROLS AND EQUIPMENT

75RM4-01E

75RM402

NOTE:

The mark of “USE WITH” (5)

To clear fog on the windshield and/or the

side windows quickly, set the air flow

selector (3) to “HEAT & DEFROST” or

“DEFROST” and air intake selector (4) to

“FRESH AIR”. These positioning will clear

the fogged windshield and/or the side win-

dows faster than the “RECIRCULATED

AIR”.

System operating instructions

Natural ventilation

Select VENTILATION and FRESH AIR, the

temperature selector to the desired tem-

perature position, and the blower speed

selector to off. Fresh air will flow through

the vehicle during driving.

Forced ventilation

The control settings are the same as for

natural ventilation except you set the

blower speed selector to a position other

than off.

Normal heating (using outside air)

Select HEAT and FRESH AIR, the tem-

perature selector to the desired tempera-

ture position and the blower speed selector

to the desired blower speed position. Set-

ting the blower speed selector to a higher

blower speed position increases heating

efficiency.

Quick heating (using recirculated air)

The control settings are the same as for

normal heating except you select RECIR-

CULATED AIR. If you use this heating

method for an extended period of time, the

air in the vehicle can become contami-

nated and the windows can become misty.

Therefore, use this method only for quick

heating and change to the normal heating

method as soon as possible.

Head cooled/Feet warmed heating

Select BI-LEVEL and FRESH AIR, the

temperature selector to the desired tem-

perature position, and the blower speed

selector to the desired blower speed posi-

tion. Unless the temperature selector is in

the fully cold position or fully hot position,

the air that comes out of the center and

side outlets will be cooler than the air that

comes out of the floor outlets.

Defrosting/Feet warmed heating

Select HEAT & DEFROST and FRESH

AIR, the temperature selector to the

desired temperature position, and the

blower speed selector to high. When the

windshield has become clear, set the

blower speed selector to the desired

blower speed position.

Defrosting

Select DEFROST and FRESH AIR, the

temperature selector to the desired tem-

perature position (higher temperature pro-

vides more efficient defrosting), and the

blower speed selector to high. When the

windshield has become clear, set the

blower speed selector to the desired

blower speed position.

(3)

(5)

5-20

OTHER CONTROLS AND EQUIPMENT

75RM4-01E

75RM357

NOTE:

If you need maximum defrosting, adjust

the temperature selector to hot end and

adjust the side outlets so the air blows on

the side window, in addition to the above

Defrosting procedure.

Models with ENG A-STOP System

(if equipped)

• If the heating performance can no longer

perform at a sufficient level due to auto-

matically stopping the engine, press the

ENG A-STOP OFF switch to deactivate

the ENG A-STOP system. (The engine

will automatically restart and the heating

performance will be restored.)

• If the windshield and/or the driver’s side/

passenger side door windows are

fogged during automatically stopping the

engine, stop the ENG A-STOP system

and restart the engine. Then, turn the air

flow selector (3) to change the air flow to

the HEAT & DEFROST or DEFROST

position to defog the windows.

EXAMPLE

Other Controls and Equipment -> Heating system for Your Suzuki Ignis SUV Second Generation (2016-2024)

Related Topics

Popular Owner Manuals

Latest Owner Manuals