INSPECTION AND MAINTENANCE
(For K10C without SHVS engine model)
(For K10C with SHVS engine model/
K12C engine model)
The drive belts tension is adjusted auto-
matically.
Drive belt
(2)
(3)
(1)
WARNING
(b)
(a)
When the engine is running, keep
hands, hair, clothing, tools, etc. away
from the moving fan and drive belts.
Check that the drive belt tension is correct
while the engine is stopped. If the belt is
too loose, insufficient battery charging,
engine overheating, poor air conditioning,
or excessive belt wear can result. When
you push the belt with your thumb midpoint
between the pulleys, there should be a
deflection according to the following chart.
(4) (5)
(6)
68PM00702
(1) Vehicle front
(3) Water pump
(5) Idler pulley
(2) Vehicle rear
(4) Generator
The belts should also be examined to
ensure that they are not damaged.
(6) Air conditioner compressor
If you need to replace or adjust the belt
have it done by an authorized SUZUKI
dealer.
Drive belt deflection (100 N (10 kg, 22
lbs) press)
(a) 6.2 - 7.1 mm (0.24 - 0.28 in.)
(b) 4.4 - 5.0 mm (0.17 - 0.20 in.)
7-13
52RM0-01E
English 
