Automatic Transaxle (AT) Fluid: 10
Engine Coolant: 1, 2
INSPECTION AND MAINTENANCE
Gear Oil Level Check
Manual transaxle
EXAMPLE
Spark Plugs
Gear Oil
Replacing and inspection spark
plugs
Specified Gear Oil
When adding gear oil, use gear oil with the
appropriate viscosity and grade as shown
in the chart below.
Since special procedures, materials and
tools are required, it is recommended that
you trust this job to your authorized
SUZUKI dealer.
We highly recommend you use:
SUZUKI GEAR OIL 75W-80 for manual
transaxle gear oil.
(1)
Manual transaxle oil (API GL-4)
75W-80
o
-30 -20 -10
0
32
10
50
20
68
30
86 104
40
C
F
58MST0701
o
-22
-4
14
To check the gear oil level, use the follow-
ing procedure:
68LM728
1) Park the vehicle on a level surface with
the parking brake applied. Then, stop
the engine.
2) Remove the oil filler plug (1) .
3) If gear oil flow from the plug hole, the oil
level is correct. Reinstall the plug. If
gear oil do not flow from the plug hole,
add oil through the filler plug hole until a
little oil flow from the plug hole.
Tightening torque for oil filler
plug (1)
Manual transaxle:
21 Nm (2.1 kg-m, 15.2 lb-ft)
7-14
58MS0-14E
English 
