INSPECTION AND MAINTENANCE
Deterioration checking or changing
oil
Brakes
EXAMPLE
Since special procedures, materials and
tools are required to check the deteriora-
tion of CVT oil or change, ask an autho-
rized SUZUKI dealer for this job.
(3)
Brake fluid
(1)
EXAMPLE
(2)
MAX
57RK073
(1) FULL HOT
(2) LOW HOT
(3) The lowest point = Fluid level
MIN
6) The handle of the CVT fluid dipstick is
colored orange for easy identification.
Remove the dipstick, wipe the oil off
with a clean cloth and push it back in
until the cap seats. Then pull out the
dipstick.
57RK086
Check the brake fluid level by looking at
the reservoir in the engine compartment.
Check that the fluid level is between “MAX”
and “MIN” lines.
7) Check both sides of the dipstick, and
read the lowest level. The fluid level
should be between the two marks in “H”
(hot) range on the dipstick.
NOTICE
If your brake fluid level is near the
“MIN” line, there is a possibility of
brake pad and/or shoe wear and
brake fluid leakage. Consult with
your authorized SUZUKI dealer
regarding this possibility before fill-
ing the reservoir.
NOTICE
After checking or adding oil, be sure
to insert the dipstick securely.
7-16
English 
