INSPECTION AND MAINTENANCE
Interior light
Wiper blades
Remove the lens by using a flat-bladed
screwdriver covered with a soft cloth as
shown. To install it, simply push it back in.
Front
(2)
76MH0A126
2) To remove and install the bulb of the
license plate light (2), simply pull out or
push in the bulb.
54G129
If the wiper blades become brittle or dam-
aged, or make streaks when wiping,
replace the wiper blades.
High-mount stop light
76MH0A139
LED is used. It is recommended that you
take your vehicle to an authorized SUZUKI
dealer for bulb replacement since special
procedures are required.
To install new wiper blades, follow the pro-
cedures below.
Luggage compartment (if equipped)
NOTICE
To avoid scratching or breaking the
window, do not let the wiper arm
strike the window while replacing the
wiper blade.
52RM70281
7-33
English 
