Advertisement

Download User Manual App

Quickly access user manual for free!

OPERATING YOUR VEHICLE -> ENG A-STOP system (engine auto stop start system) for Your Suzuki Swift 4 Door Third Generation 2016-2022

OPERATING YOUR VEHICLE  
WARNING  
ENG A-STOP system  
(engine auto stop start system)  
(Continued)  
• When the engine does not restart  
automatically even if you operate  
properly, start the engine using the  
ignition switch or engine switch.  
– Keep stopping on the road may  
result in rear collision.  
– In case the vehicle moves, the  
steering and braking operation  
will require more efforts.  
The ENG A-STOP system (engine auto  
stop start system) automatically stops and  
restarts the engine without operating the  
ignition switch or the engine switch when  
the vehicle is stopped, such as at a traffic  
signal or in a traffic jam, to reduce exhaust  
gases and fuel consumption.  
• When the vehicle will be stopped for a  
long time or when you will leave the  
vehicle unattended, turn the ignition  
switch to the “LOCK” position or press  
the engine switch to stop the engine.  
NOTICE  
72M2042  
Only use the vehicle battery types  
that have been approved by SUZUKI  
vehicle manufacture, otherwise you  
could damage your vehicle, and the  
ENG A-STOP system could not be  
available. If a vehicle battery has to  
be replaced, consult your authorized  
SUZUKI dealer.  
WARNING  
• Do not go out the vehicle when the  
engine is stopping by the ENG A-  
STOP system. This may result in an  
accident.  
NOTE:  
If your vehicle is equipped with the auto air  
conditioning system, you can change the  
auto engine stop condition via the informa-  
tion display. Refer to “Information display”  
in the “BEFORE DRIVING” section.  
– For CVT vehicle, if the driver’s  
seat belt is unfastened even if the  
brake pedal is pressed down, or  
the driver’s door is opened, the  
engine will be restarted to warn  
you that the engine was stopped  
automatically by the ENG A-  
STOP system.  
The ENG A-STOP system is automatically  
activated when the ignition switch is turned  
to the “ON” position or the engine switch is  
pressed to change the ignition mode to  
ON.  
(Continued)  
The system activation also requires the fol-  
lowing conditions:  
• Driver’s seat belt is fastened.  
• Driver’s door is closed.  
• Engine hood is closed.  
3-19