Advertisement

Download User Manual App

Quickly access user manual for free!

OPERATING YOUR VEHICLE -> Keyless push start system (if equipped) for Your Suzuki Swift 4 Door Third Generation 2016-2022

OPERATING YOUR VEHICLE  
Unreleased steering lock warning  
Keyless push start system  
(if equipped)  
NOTICE  
If the steering lock remains engaged when  
you press the engine switch to change the  
ignition mode to ON, the information dis-  
play in the instrument cluster shows the  
message: “TRN. STEERING WHEEL TO  
RELEASE LOCK”. Refer to “Information  
display” in “BEFORE DRIVING” section for  
details.  
Do not leave the engine switch in  
ACC or ON mode when the engine is  
not running. Avoid using the radio or  
other electric accessories for a long  
time when the engine switch is in  
ACC or ON mode when the engine is  
not running, otherwise the lead-acid  
battery may discharge.  
Provided the keyless push start system  
remote controller is within the interior work-  
able area (refer to the related explanation  
in this section), you can use the engine  
switch for starting the engine and selecting  
an ignition mode (ACC or ON). In addition,  
the following functions can be used:  
NOTE:  
NOTE:  
• Keyless entry function. Refer to “Keyless  
push start system remote controller /  
keyless entry system transmitter (if  
equipped)” in “BEFORE DRIVING” sec-  
tion for details.  
• Locking and unlocking doors (including  
the tailgate) using a request switch.  
Refer to “Keyless push start system  
remote controller / keyless entry system  
transmitter (if equipped)” in “BEFORE  
DRIVING” section for details.  
The steering lock may not be released and  
the immobilizer/keyless push start system  
warning light turns on if some load is  
applied on the steering wheel. If this hap-  
pens, turn the steering wheel system to the  
right or left to relieve it from the load before  
you press the engine switch again to  
change to the desired ignition mode.  
In the presence of strong radio wave or  
noise, you may not be able to change the  
ignition mode to ACC or ON or to start the  
engine using the engine switch. In this  
case, the information display in the instru-  
ment cluster will show the following mes-  
sage: KEY FOB NOT DETECTED.  
• Immobilizer (anti-theft) function. Refer to  
“Immobilizer system” in “BEFORE DRIV-  
ING” section for details.  
3-6