2023-2026 Suzuki Swift 4 Door BEFORE DRIVING -> Information display User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

BEFORE DRIVING -> Information display for Your Suzuki Swift 4 Door Fourth Generation (2023-2026)

BEFORE DRIVING  
Clock  
Information display  
EXAMPLE  
The display (A) shows the time.  
Information display is shown when the igni-  
tion switch is turned to “ON” position.  
To change the time indication:  
(A)  
1) Push the trip meter selector knob (1)  
and the indicator selector knob (2)  
together.  
EXAMPLE  
2) To change the hour indication, turn the  
indicator selector knob (2) left or right  
repeatedly when the hour indication  
blinks. To change the hour indication  
quickly, turn and hold the indicator  
selector knob (2). To set the hour indi-  
cation, push the indicator selector knob  
(2) and the minute indication will blink.  
3) To change the minute indication, turn  
the indicator selector knob (2) left or  
right repeatedly when the minute indi-  
cation blinks. To change the minute  
indication quickly, turn and hold the  
indicator selector knob (2). To set the  
minute indication, push the indicator  
selector knob (2).  
(B)  
(C)  
(D)  
(3)  
57RK110  
(3) Information display  
The information display shows the follow-  
ing information.  
(1)  
(2)  
52RM20490  
Display (A)  
(1) Trip meter selector knob  
(2) Indicator selector knob  
Clock  
Display (B)  
Selector position (for CVT vehicles)  
To select 12/24H format, refer to “Setting  
mode” in this section.  
Display (C)  
Trip meter / Odometer / Fuel consumption /  
Driving range  
WARNING  
Display (D)  
Fuel gauge  
If you attempt to adjust the display  
while driving, you could lose control  
of the vehicle.  
Do not attempt to adjust the display  
while driving.  
2-55  
BEFORE DRIVING  
Selector position (for CVT vehicles)  
EXAMPLE  
Push the trip meter selector  
knob (1).  
EXAMPLE  
(a)  
Push the indicator selector  
knob (2).  
(a) Trip meter A  
(b) Trip meter B  
(b)  
(c)  
(d)  
(e)  
(f)  
(c) Odometer  
52RM21360  
(d) Instantaneous fuel consumption  
(e) Average fuel consumption  
(f) Driving range  
Selector position (for CVT vehicles)  
When the ignition switch is turned to “ON”  
position, the display (B) indicates the gear  
position.  
For details on how to use the transaxle,  
refer to “Using transaxle” in “OPERATING  
YOUR VEHICLE” section.  
WARNING  
If you attempt to adjust the display  
while driving, you could lose control  
of the vehicle.  
Do not attempt to adjust the display  
while driving.  
Trip meter / Odometer /  
Fuel consumption / Driving range  
NOTE:  
The display (C) shows one of the following  
indications; trip meter A, trip meter B,  
odometer, instantaneous fuel consump-  
tion, average fuel consumption or driving  
range.  
• Indications will change when you push  
and release a knob.  
• The display shows estimated values.  
Indications may not be the same as  
actual values.  
To switch the display indication (C), push  
the trip meter selector knob (1) or the indi-  
cator selector knob (2) quickly.  
57RK123  
2-56  
BEFORE DRIVING  
Trip meter  
Instantaneous fuel consumption  
The display shows the value of instanta-  
neous fuel consumption only when the  
vehicle is moving.  
Average fuel consumption  
The trip meter can be used to measure the  
distance traveled on short trips or between  
fuel stops.  
If you selected average fuel consumption  
the last time you drove the vehicle, the dis-  
play shows the last value of average fuel  
consumption from previous driving when  
the ignition switch is turned to “ON” posi-  
tion. Unless you reset the value of average  
fuel consumption, the display indicates the  
value of average fuel consumption which  
includes average fuel consumption during  
previous driving.  
You can use the trip meter A or trip meter B  
independently.  
NOTE:  
• The display does not show the value  
unless the vehicle is moving.  
To reset the trip meter, push and hold the  
trip meter selector knob (1) until the display  
shows 0.0.  
• Depending on the vehicle’s specification,  
the fuel consumption units of initial set-  
ting are indicated as L/100km or km/L.  
• For “L/100km” setting, the indicated  
maximum value of instantaneous fuel  
consumption is 30. No more than 30 will  
be indicated on the display even if the  
actual instantaneous fuel consumption is  
higher.  
• For “km/L” setting, the indicated maxi-  
mum value of instantaneous fuel con-  
sumption is 50. No more than 50 will be  
indicated on the display even if the  
actual instantaneous fuel consumption is  
higher.  
• The indication on the display may be  
delayed if fuel consumption is greatly  
affected by driving conditions.  
• The display shows estimated values.  
Indications may not be the same as  
actual values.  
NOTE:  
The indicated maximum value of the trip  
meter is 9999.9. When you run past the  
maximum value, the indicated value will  
return to 0.0.  
To reset the average fuel consumption,  
push and hold the indicator selector knob  
(2) for a while when the display shows the  
average fuel consumption.  
Odometer  
NOTE:  
The odometer records the total distance  
the vehicle has been driven.  
When you reset the indication or reconnect  
the negative (–) terminal to the lead-acid  
battery, the value of average fuel con-  
sumption will be shown after driving for a  
while.  
NOTICE  
Keep track of your odometer reading  
and check the maintenance sched-  
ule regularly for required services.  
Increased wear or damage to certain  
parts can result from failure to per-  
form required services at the proper  
mileage intervals.  
• For “L/100km” or “km/L” setting, you can  
change the units that instantaneous fuel  
consumption is displayed in. Refer to  
“Average fuel consumption” in this sec-  
tion.  
2-57  
BEFORE DRIVING  
(For “L/100km” or “km/L” setting)  
To change the unit of average fuel con-  
sumption, while pushing and holding the  
trip meter selector knob (1), turn the indica-  
tor selector knob (2).  
Driving range  
Fuel gauge  
If you selected driving range the last time  
you drove the vehicle, the display indicates  
“---” for a few seconds and then indicates  
the current driving range when the ignition  
switch is turned to “ON” position.  
The display (D) shows the fuel gauge.  
Refer to “Fuel gauge” in this section.  
EXAMPLE  
The driving range shown in the display is  
the approximate distance you can drive  
until the fuel gauge indicates “E”, based on  
current driving conditions.  
(Initial  
setting)  
When the low fuel warning light comes on,  
the display “---” will appear.  
If the low fuel warning light comes on, fill  
the fuel tank immediately regardless of the  
value of driving range shown in the display.  
When you refuel, the driving range is  
updated. However, if you only add a small  
amount of fuel, the correct value will not be  
displayed.  
68PH02207  
NOTE:  
When you change the units that average  
fuel consumption is displayed in, the  
instantaneous fuel consumption units will  
be changed automatically.  
NOTE:  
• If you refuel when the ignition switch is in  
“ON” position, the driving range may not  
indicate the correct value.  
• When you reconnect the negative (–)  
terminal to the lead-acid battery, the  
value of driving range will be shown after  
driving for a while.  
2-58  
BEFORE DRIVING  
Setting mode  
In the setting mode, you can set up and customize the following functions.  
Indication  
Functions  
Time indication of clock “  
”
Central door locking system “  
”
Additional flashes of the turn signal “  
”
Security system “  
”
Initialization setting “  
”
Exit the setting mode “  
”
Turn the indicator selector knob (2).  
Push the indicator selector knob (2).  
NOTE:  
Depending on vehicle’s specifications, some items may not be displayed.  
2-59  
BEFORE DRIVING  
How to use the setting mode:  
Time indication of clock “  
”
1) When the ignition switch is in “ON”  
position, and the vehicle is stationary.  
2) Push and hold the indicator selector  
knob (2) until the display shows  
•
: 12-hour format (default set-  
ting)  
: 24-hour format  
•
“
”.  
Central door locking system “  
(if equipped)  
”
3) Turn and/or push the indicator selector  
knob (2) to select a function that you  
want to set up according to the chart in  
the previous page.  
•
: Unlock all doors by turning  
the key once  
: Unlock all doors by turning  
the key twice (default setting)  
•
4) Turn and/or push the indicator selector  
knob (2) to register settings of the fol-  
lowing functions.  
Additional flashes of the turn signal  
“
”
•
: Turn signal flashes three  
times after the turn signal  
lever is returned (default set-  
ting)  
: Disable the additional flashes  
of turn signal  
EXAMPLE  
•
68PM00272  
Security system “ ” (if equipped)  
NOTE:  
•
: Enable the security system  
(default setting)  
• As shown in the above illustration, “  
”
indicates on the display of currently set-  
ting item.  
•
: Disable the security system  
• To go back to the higher level display  
during operation, turn the indicator  
Initialization setting “  
”
•
:
Initialize all settings  
selector knob (2) to display “  
” and then push the indicator  
selector knob (2).  
” or  
“
How to exit the setting mode:  
Switch the display to show “  
” and then  
push the indicator selector knob (2).  
2-60  

Related Topics

BEFORE DRIVING
Instrument cluster (Type B) (if equipped) Speedometer Tachometer Fuel gauge Temperature gauge Brightness control Information switch (if equipped) Warning and indicator lights Lighting control lever Headlight leveling switch (if equipped) Turn signal control lever Hazard warning switch Windshield wiper and washer lever Tilt/telescoping (if equipped) steering lock lever Horn

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot