’01 4Runner_U (L/O 0008)
Fuel tank cap
TESTING THE SYSTEM
1. Open all the windows.
2. Set the system as described above.
The side doors and back door should
be locked with the key or wireless re-
mote control transmitter. Be sure to
wait until the indicator light goes off or
starts flashing.
3. Unlock any side door from the inside.
The system should activate the alarm.
4. Stopping the alarm as described above.
5. Repeat this operation for the other
doors and hood. When testing on the
hood, also check that the system is
activated when the battery terminal is
disconnected and then reconnected.
1. To open the fuel filler door, pull the
lever.
2. To remove the fuel tank cap, turn
the cap slowly counterclockwise,
then pause slightly before removing
it.
When refueling, turn off the engine.
If the system does not work properly,
have it checked by your Toyota dealer.
It is not unusual to hear a slight swoosh
when the cap is opened. When installing,
CAUTION
turn the cap clockwise till you hear
click.
a
D Do not smoke, cause sparks or al-
low open flames when refueling.
The fumes are flammable.
If the cap is not tightened securely, the
malfunction indicator lamp comes on.
Make sure the cap is tightened securely.
D When opening the cap, do not re-
move the cap quickly. In hot weath-
er, fuel under pressure could cause
injury by spraying out of the filler
neck if the cap is suddenly re-
moved.
The indicator lamp goes off after driving
several times. If the indicator lamp does
not go off, contact your Toyota dealer as
soon as possible.
2001 4RUNNER (OM35768U)
31
English 