’01 4Runner_U (L/O 0008)
The system will automatically be set after
30 seconds. When the system is set, the
indicator light will start flashing again.
Reactivating the alarm
Once set, the system automatically resets
the alarm after the alarm stops.
4. After making sure the indicator light
starts flashing, you may leave the ve-
hicle.
The alarm will activate again under the
in
same circumstances
“Activating the system”.
described
Never leave anyone in the vehicle when
you set the system, because unlocking
from the inside will activate the system.
Stopping the alarm
The alarm will be stopped by the following
three ways:
WHEN THE SYSTEM IS SET
Activating the system
D Turn the ignition key from the “LOCK”
to “ON” position.
The system will give the alarm under the
following conditions:
D Unlock any of the side doors or back
door with the key or wireless remote
control transmitter.
SETTING THE SYSTEM
D If any of the side doors is unlocked or
opened without the key or wireless re-
mote control transmitter, or if the back
door or hood is forcibly opened.
1. Turn the ignition key to the “LOCK”
position and remove it.
These ways cancel the system at the
same time.
The indicator light will start flashing when
the key is removed from the ignition
switch. (See “Engine immobiliser system”
for details.)
D If the battery terminal is disconnected
and then reconnected.
The indicator light will come on when the
system is activated.
2. Have all passengers get out of the
vehicle.
If the alarm has been activated and the
key is not in the ignition switch, all the
side doors and back door will re−lock au-
tomatically.
3. Close and lock all the side doors, back
door and hood.
The indicator light will come on when all
the side doors, back door and hood are
closed and locked.
After one minute, the alarm will automati-
cally stop and the indicator light will starts
flashing again.
2001 4RUNNER (OM35768U)
30
English 