Get Operation of each component -> Power windows Guide for Toyota 4 Runner SUV Fifth Generation (2010-2024)

155

3-5. Opening, closing the windows and moon roof

Power windows

Opening and closing procedures

The power windows can be opened and closed using the switches.

Operating the switch moves the windows as follows:

Closing

One-touch closing*

Opening

One-touch opening*

*^{: To stop the window partway, oper-}

ate the switch in the opposite direc-

tion.

Window lock switch

Press the switch to lock the pas-

senger window switches and back

window switch.

Use this switch to prevent children

from accidentally opening or clos-

ing a passenger window.

■The power windows can be operated when

The engine switch is in IGNITION ON mode.

■Operating the power windows after turning the engine off

The power windows can be operated for approximately 45 seconds even

after the engine switch is turned to ACCESSORY mode or turned off. They

cannot, however, be operated once either front door is opened.

■Jam protection function

If an object becomes jammed between the window and the window frame

while the window is closing, window movement is stopped and the window is

opened slightly.

■Catch protection function

If an object becomes caught between the door and window while the window

is opening, window movement is stopped.

4RUNNER (U)

156

3-5. Opening, closing the windows and moon roof

■When the window cannot be opened or closed

When the jam protection function or catch protection function operates

unusually and the door window cannot be opened or closed, perform the fol-

lowing operations with the power window switch of that door.

●Stop the vehicle. With the engine switch in IGNITION ON mode, within 4

seconds of the jam protection function or catch protection function activat-

ing, continuously operate the power window switch in the one-touch closing

direction or one-touch opening direction so that the door window can be

opened and closed.

●If the door window cannot be opened and closed even when performing the

above operations, perform the following procedure for function initialization.

Turn the engine switch to IGNITION ON mode.

Pull and hold the power window switch in the one-touch closing direction

and completely close the door window.

Release the power window switch for a moment, resume pulling the

switch in the one-touch closing direction, and hold it there for approxi-

mately 6 seconds or more.

Press and hold the power window switch in the one-touch opening direc-

tion. After the door window is completely opened, continue holding the

switch for an additional 1 second or more.

Release the power window switch for a moment, resume pushing the

switch in the one-touch opening direction, and hold it there for approxi-

mately 4 seconds or more.

Pull and hold the power window switch in the one-touch closing direction

again. After the door window is completely closed, continue holding the

switch for a further 1 second or more.

If you release the switch while the window is moving, start again from the

beginning.

If the window reverses and cannot be fully closed or opened, have the vehicle

inspected by your Toyota dealer.

■Door lock linked window operation

●The power windows can be opened and closed using the key or mechanical

^key.* (P. 106, 512)

^{●The power windows can be opened using the wireless remote control.}*

(P. 106)

*: These settings must be customized at your Toyota dealer.

■Customization

Settings (e.g. key linked operation) can be changed.

(Customizable features P. 549)

4RUNNER (U)

157

3-5. Opening, closing the windows and moon roof

WARNING

Observe the following precautions.

Failure to do so may result in death or serious injury.

■Closing the windows

●The driver is responsible for all the power window operations, including the

operation for the passengers. In order to prevent accidental operation,

especially by a child, do not let a child operate the power windows. It is

possible for children and other passengers to have body parts caught in

the power window. Also, when riding with a child, it is recommended to use

the window lock switch. (P. 155)

●Check to make sure that all passengers do not have any part of their body

in a position where it could be caught when a window is being operated.

●When using the key or mechanical key and operating the power windows,

operate the power window after checking to make sure that there is no

possibility of any passenger having any of their body parts caught in the

window. Also do not let a child operate window by the key or mechanical

key. It is possible for children and other passengers to get caught in the

power window.

●When exiting the vehicle, turn the engine switch off, carry the key and exit

the vehicle along with the child. There may be accidental operation, due to

mischief, etc., that may possibly lead to an accident.

■Jam protection function

●Never use any part of your body to intentionally activate the jam protection

function.

●The jam protection function may not work if something gets jammed just

before the window is fully closed. Be careful not to get any part of your

body jammed in the window.

■Catch protection function

●Never use any part of your body or clothing to intentionally activate the

catch protection function.

●The catch protection function may not work if something gets caught just

before the window is fully opened. Be careful not to get any part of your

body or clothing caught in the window.

4RUNNER (U)

Operation of each component -> Power windows for Your Toyota 4 Runner SUV Fifth Generation (2010-2024)

Related Topics

Operation of each component

Popular Owner Manuals

Latest Owner Manuals