STEERING WHEEL AND MIRRORS
Anti-glare inside rear view
mirror
Auto anti-glare inside rear
view mirror
Adjust the mirror so that you can just see
the rear of your vehicle in the mirror.
Adjust the mirror so that you can just see
the rear of your vehicle in the mirror.
To reduce glare from the headlights of the
vehicle behind you during night driving,
operate the lever on the lower edge of the
mirror.
This mirror is equipped with auto anti-
glare function. The function is designed
to reduce glare from the headlights of the
vehicle behind you during night driving.
Daylight driving—Lever at position 1
When the ignition switch is set to ON, the in-
side rear view mirror always turns on in the
automatic function mode.
The reflection in the mirror has greater clarity
at this position.
The indicator illuminates to show you that the
function is on.
Night driving—Lever at position 2
Remember that by reducing glare you also
lose some rear view clarity.
In automatic function mode, if the mirror de-
tects light from the headlights of the vehicle
behind you, the mirror surface darkens slight-
ly to reduce the reflected light.
CAUTION
To turn off and on the automatic function,
press the AUTO switch.
Do not adjust the mirror while the ve-
hicle is moving. Doing so may cause the
driver to mishandle the vehicle and an
accident may occur resulting in death
or serious injury.
Adjust it before driving so that the rear view
is in the best condition.
When the inside air temperature is low, it may
take a little longer for the mirror to darken in
response to the detection of headlights.
CAUTION
Do not adjust the mirror while the ve-
hicle is moving. Doing so may cause the
driver to mishandle the vehicle and an
accident may occur resulting in death
or serious injury.
86
English 
