Get BEFORE DRIVING -> Opening and closing the windows and moon roof Guide for Toyota Aurion 4 Door Second Generation (2013-2017)

BEFORE DRIVING

Opening and closing the windows and moon roof

POWER WINDOWS

The windows can be operated with the power window switch on each door.

•

Vehicles with standard type ignition switch–

Turn the ignition switch to the ON position.

Vehicles with smart entry and start system–

Press the ENGINE START STOP switch to IGNITION ON mode.

Normal operation

The window moves as long as you hold the switch.

1. To close the window, lightly pull the

switch up.

2. To open the window, lightly push the

switch down.

One-touch operation for driver’s door

3. To close the window, pull the switch

up completely and then release it.

4. To open the window, push the switch

down completely and then release it.

•

Pushing the switch in the opposite direction will stop window travel partway.

Key off operation

Vehicles with standard type ignition switch–

If both front doors are closed, the power windows can be operated for about 45 seconds

after the ignition switch is turned off. They stop working if either front door is opened.

Vehicles with smart entry and start system–

If both front doors are closed, the power windows can be operated for about 45 seconds

after the ENGINE START STOP switch is turned off. They stop working if either front door

is opened.

Jam protection function for driver’s door

During closing operation, the driver’s window will stop and open about half way if

something gets caught between the window and window frame.

If the window receives a strong impact, this function may work even if nothing is caught.

CAUTION

•

The jam protection function does not work if the driver’s window switch is

completely pulled up and held.

Never try jamming any part of your body to make the jam protection function work

intentionally.

The jam protection function may not work if something gets caught just before the

window is fully closed.

40

BEFORE DRIVING

Opening and closing the windows and moon roof

Window lock switch

If you press the window lock switch

on the driver’s door, the front and rear

passenger’s windows cannot be operated.

Use this switch to prevent children from

accidently opening or closing a window.

CAUTION

To avoid death or serious personal injury, you must do the following.

•

Before you close the power windows, always make sure the heads, hands and other

parts of the bodies of all occupants are kept completely inside the vehicle.

•

When small children are in the vehicle, never let them use the power window

switches without supervision. Use the window lock switch to prevent them from

making unexpected use of the switches.

•

Never leave anyone (particularly a small child) alone in your vehicle, especially with

the key still inserted in the ignition switch (vehicles with standard type ignition

switch) or the key left in your vehicle (vehicles with smart entry and start system).

Otherwise, he / she could use the power window switch and become trapped in the

window opening. Unattended children are at particular risk of injury.

The jam protection function may not work if something gets caught just before the

window is fully closed.

When the driver’s power window does not close normally

If the jam protection function is operating abnormally and the window cannot be closed,

perform the following operations using the driver’s door power window switch.

•

After stopping the vehicle, the window can be closed by holding the power window

switch in the one-touch closing position while the ignition switch is turned to the ON

position (vehicles with standard type ignition switch) or the ENGINE START STOP

switch is pressed to IGNITION ON mode (vehicles with smart entry and start system).

•

If the window still cannot be closed even by carrying out the previous step, initialise

the function by performing the following procedure.

1. Hold the power window switch in the one-touch closing position.

Continue holding the switch for a further 6 seconds after the window has closed.

2. Hold the power window switch in the one-touch opening position.

Continue holding the switch for a further 2 seconds after the window has opened

completely.

41

BEFORE DRIVING

Opening and closing the windows and moon roof

3. Hold the power window switch in the one-touch closing position once again.

Continue holding the switch for a further 2 seconds after the window has closed.

•

If you release the switch while the window is moving, start again from the beginning.

If the window continues to close but then re-open slightly even after performing the

above procedure correctly, have the vehicle inspected by your Toyota dealer.

Customisable features that can be modified

For further information refer to “Customisable features” on page 333.

MOON ROOF

To operate the moon roof, use the switches on the overhead console while the ENGINE

START STOP switch is pressed to IGNITION ON mode.

The sunshade can be opened or closed by hand.

Sliding operation

1. Push the OPEN switch to open the

moon roof.

The moon roof will open and stop part-

way from the fully opened position.

Push the switch again to fully open

the moon roof.

2. Push the CLOSE switch to close the

moon roof.

The moon roof will fully close

automatically.

•

To stop the moon roof in another position when opening or closing, push one of the

moon roof switches briefly.

As driving with the moon roof opened fully may cause wind throbs, we recommend

you drive with the moon roof part-way from the fully opened position.

If the sunshade was closed, it will be opened along with the moon roof.

Tilting operation

1. Press the UP switch to tilt the moon

roof.

The roof will fully tilt up automatically.

2. Press the DOWN switch to close the

moon roof.

The roof will fully tilt down

automatically.

•

To stop the roof part-way, press one of

the moon roof switches briefly.

42

BEFORE DRIVING

Opening and closing the windows and moon roof

Key off operation

The moon roof can be operated for about 45 seconds after the ENGINE START STOP

switch is turned off. It stops working when either front door is opened.

Moon roof open reminder function

An alarm will sound when the driver’s door is opened with the moon roof not fully closed

and the ENGINE START STOP switch is OFF.

Jam protection function

If an object is caught between the moon roof and frame during the closing operation, the

moon roof stops and reopens slightly.

CAUTION

To avoid death or serious personal injury, you must do the following.

•

If any part of someone’s body is caught in the closing roof, it could result in death

or serious injury.

•

While the vehicle is moving, always keep the heads, hands and other parts of the

bodies of all occupants away from the roof opening. Otherwise, they could be killed

or seriously injured if the vehicle stops suddenly or if the vehicle is involved in an

accident.

•

Before you close the moon roof, always make sure nobody places his or her head,

hands and/or other parts of the body in the roof opening.

Never leave anyone (particularly a small child) alone in your vehicle, especially with

the ignition key still inserted (vehicles with standard type ignition switch) or the key

left in your vehicle (vehicles with smart entry and start system). Otherwise, he/she

could use the moon roof switch and get trapped in the roof opening.

•

Never sit on top of the vehicle around the roof opening.

Never try jamming any part of your body to activate the jam protection function

intentionally, as it could result in a death or serious injury.

•

The jam protection function may not work if something gets caught just before the

moon roof is fully closed.

When the moon roof does not close normally

If the moon roof closes but then re-opens slightly–

1. Stop the vehicle.

2. Press and hold the CLOSE switch (*1).

The moon roof will close, reopen and pause for approximately 10 seconds (*2). Then it

will close again, tilt up and pause for approximately 1 second. Finally, it will tilt down,

open and close.

3. Check to make sure the moon roof is completely closed and then release the switch.

43

BEFORE DRIVING

Opening and closing the windows and moon roof

If the moon roof tilts down but then tilts back up–

1. Stop the vehicle.

2. Press and hold the UP switch (*1) until the moon roof moves into the tilt up position

and stops.

3. Release the UP switch once and then press and hold the UP switch again (*1).

The moon roof will pause for approximately 10 seconds in the tilt up position (*2).

Then it will adjust slightly and pause for approximately 1 second. Finally, it will tilt

down, open and close.

4. Check to make sure the moon roof is completely closed and then release the switch.

*1: If the switch is released at the incorrect time, the procedure will have to be performed

again from the beginning.

*2: If the switch is released after the above mentioned 10 second pause, automatic

operation will be disabled. In that case, press and hold the CLOSE switch or press and

hold the UP switch.

The moon roof will tilt up and pause for approximately 1 second. Then it will tilt down,

open and close. Check to make sure the moon roof is completely closed and then

release the switch.

If the moon roof does not fully close even after performing the above procedure correctly,

have the vehicle inspected by your Toyota dealer.

Customisable features that can be modified

For further information refer to “Customisable features” on page 333.

44

BEFORE DRIVING -> Opening and closing the windows and moon roof for Your Toyota Aurion 4 Door Second Generation (2013-2017)

Related Topics

BEFORE DRIVING

Popular Owner Manuals

Latest Owner Manuals