WHEN DRIVING -> Instrument cluster for Your Toyota Aurion 4 Door Second Generation (2013-2017)

WHEN DRIVING  
Instrument cluster  
Instrument cluster  
GAUGES AND METERS  
CTY22AV276  
Displays the engine speed in revolutions  
1
2
3
Tachometer  
Speedometer  
Fuel gauge  
peminute  
Displays the vehicle speed  
Displays the quantity of fuel remaining in  
the fuel tank  
Displays the average fuel consumption  
since the function was reset  
4
5
6
7
8
Average fuel consumption meter  
Current fuel consumptgauge  
Display change button  
Displays the current rate of fuel  
consumption  
Changes the odometer / trip meter display.  
Refer to page 85.  
Displays the odometer or trip meters.  
Refer to page 85.  
Odometer / trip meter display  
Multi-information display  
Displays a variety of driving related data.  
Refer to page 93.  
Engine coolant temperature  
display / instrument cluster lights  
control display  
Displays the engine coolant temperature  
and instrument cluster lights control.  
9
Displays the outside temperature.  
Refer to page 87.  
10 Outside temperature display  
Displays the currently selected shift  
position and the shift range.  
11 Shift position / shift range display  
12 Instrument cluster lights control button  
Changes the brightness of the instrument  
cluster lights  
84  
WHEN DRIVING  
Instrument cluster  
Odometer / trip meter display  
Pressing the button changes the display as  
follows.  
•
•
Odometer  
Displays the total distance the vehicle has been driven.  
Trip meters A and B  
Displays the distance the vehicle has been driven since the  
meter was last rset. Trip meters A and B can be used to  
record and display different distances independently.  
Press anhold the button to reset.  
Instrument cluster light control button  
The brightness of the instrument cluster  
lights can be adjusted by pressing the  
button.  
85  
WHEN DRIVING  
Instrument cluster  
Fuel gauge and odometer/trip meter display remain on mode  
Vehicles with standard type ignition switch–  
After the engine switch has been turned off, the fuel gauge and odometer/trip meter  
display remain on for 10 minutes, enabling the fuel gauge and odometer/trip meter values  
to be checked again without having to turn the engine switch to the ON position.  
When confirming the gauges and meters, turn the headlight switch to the  
position.  
Press the display change button to change between the odometer and trip meter displays.  
Vehicles with smart entry and start system–  
After the ENGINE START STOP switch has been turned off, the fuel gauge and odometer/  
trip meter display remain on for 10 minutes, enabling the fuel gauge and odometer/trip  
meter values to be checked again without having to press the ENGINE START STOP  
switch to IGNITION ON mode.  
When confirming the gauges and meters, turn the headlight switch to the  
position.  
Press the display change button to change between the odometer and trip meter displays.  
INFORMATION  
The instrument cluster lights illuminate when:  
•
•
Vehicles with standard type ignition switch– The nition switch is in the ON position  
Vehicles with smart entry and start system– The ENGINE START STOP switch is in  
IGNITION ON mode  
Instrument cluster light brightness.  
•
When the headlight switch is in a position other than off, the brightness will be  
reduced slightly unless the brightness level adjustment is set to the brightest  
setting.  
•
If the headlight switch is in a position other than off when the surroundings are  
dark, the brightness wll reduce slightly. However, when the surroundings are  
bright, such as durig the daytime, the brightness will not be reduced.  
Instrument panel lights.  
•
The instrument panel lights will illuminate only when the headlight switch is in a  
position other than off.  
Clock.  
•
The clock illuminates when:  
–
Vehicles with standard type ignition switch– The ignition switch is in the ON  
position  
–
Vehicles with smart entry and start system– The ENGINE START STOP switch is  
in IGNITION ON mode  
•
When the headlight switch is in a position other than off, the brightness of the clock  
will be reduced slightly.  
86  
WHEN DRIVING  
Instrument cluster  
Outside temperature display  
The temperature display shows  
temperatures within the range of −40°C  
and 50°C.  
The outside temperature is displayed  
when:  
Vehicles with standard type ignition switch–  
The ignition switch is in the ON position  
Vehicles with smart entry and start system–  
The ENGINE START STOP switch is in  
IGNITION ON mode  
In the following situations, the correct outside temperature may not be displayed, or the  
display may take longer than normal to change:  
•
•
When the vehicle is stopped, or moving at low speeds (less tan 25 km/h.)  
When the outside temperature has changed suddenly (at the entrance/ exit of a  
garage, tunnel, etc.)  
When E is displayed the system may be malfunctionig. Take your vehicle to your Toyota  
dealer.  
87  
WHEN DRIVING  
Instrument cluster  
INDICATORS AND WARNING LIGHTS  
The indicators and warning lights on the instrument cluster, centre panel and outside rear  
view mirrors inform the driver of the status of the vehicle’s various systems.  
Instrument cluster  
Indicators–  
•
The indicators inform the driver of the operag state of the vehicle’s various systems.  
Turn signal indicator  
(page 82)  
Shift position and shift range  
indicators (page 76, 79)  
Headlight high beam indicator  
(page 108)  
Cruise control indicator  
(page 120)  
Automatic high beam indicator  
(page 110) *  
Cruise control set indicator  
(page 120)  
Tail light indicator  
(page 108)  
Eco Driving Indicator  
(page 86) *  
Front fog light indicator  
(page 115)  
Slip indicator  
(page 135) *  
AFS OFF indicator (page 114)  
*: These indicator lights illuminate when the ignition switch is turned to the ON position  
(vehicles with standard type ignition switch) or the ENGINE START STOP switch is pressed  
to IGNITION ON mode (vehicles with smart entry and start system) to indicate a system  
check is being performed. They turn off after the engine is started, or after a few seconds.  
There may be a malfunction in a system if a light does not come on, or if the lights do not  
turn off. Have the vehicle inspected by your Toyota dealer.  
88  
WHEN DRIVING  
Instrument cluster  
Warning lights–  
Warning lights inform the driver of malfunctions in any of the vehicle’s systems.  
•
Warning Light  
Details  
Brake system warning light and buzzer*1  
•
Illuminates when the parking brake is engaged, if the brake fluid  
level is low or there is a malfunction in the brake system.  
•
The light also illuminates and the buzzer sounds if the park brake  
is engaged and the vehicle speed exceeds 5 km/h.  
If the parking brake is off, stop immediately and contact your Toyota  
dealer.  
Charging system warning light*1  
•
Indicates a malfunction in the vehicle’s charging system.  
Stop immediately and contact your Toyota dea.  
Low engine oil pressure warning light*1  
•
Indicates the engine oil pressure is too low.  
Stop immediately and check  
High engine coolant temperature warning light  
(the right-most segment of the engine coolant temperature display  
flashes)  
•
Indicates the engiis almost overheating. Refer to “If your  
vehicle overhes” on page 319.  
Stop immediately and contact your Toyota dealer  
Malfunction dicator warning light*1  
•
Indicates a malfunction in:  
The electronic engine control system; or  
The electronic throttle control system; or  
The electronic automatic transmission control system.  
Stop immediately and contact your Toyota dealer  
•
It may also illuminate when the fuel tank is completely empty,  
refer to “If the malfunction indicator warning light comes on while  
driving” on page 305.  
SRS warning light*1  
•
Indicates a malfunction in:  
The SRS airbag system; or  
The seatbelt pretensioner system  
Stop immediately and contact your Toyota dealer  
89  
WHEN DRIVING  
Instrument cluster  
Warning Light  
Details  
ABS warning light*1  
•
Indicates a malfunction in:  
The ABS; or  
The brake assist system.  
Stop immediately and contact your Toyota dealer  
Electric power steering warning light and buzzer*1,2  
•
Indicates a malfunction in the EPS system.  
Stop immediately and contact your Toyota dealer  
Slip indicator warning light*1  
•
Indicates a malfunction in:  
VSC system; or  
TRC system.  
•
The indicator flashes to indicate the system is operating.  
Stop immediately and contact your Toyota dealer  
Cruise control warning light (illumintes yellow)  
•
Indicates a malfunction in the cruise control system.  
Stop immediately and contact your Toyota dealer  
Automatic high beam warninlight (illuminates yellow)  
•
Indicates a malfunion in the automatic high beam system.  
Stop immediately and contact your Toyota dealer  
AFS OFF indicatolight (flashes)  
•
Indicates a malfunction in:  
Adaptive front lighting system; or  
Autoatic headlight levelling system.  
Contct your Toyota dealer  
Open door warning light and buzzer  
•
•
Indicates a door or the boot lid is not fully closed.  
The buzzer sounds if a door or the boot lid is not fully closed and  
the vehicle speed exceeds 5 km/h.  
Check all doors and the boot lid are closed  
Driver and front passenger seatbelt warning light and buzzer  
•
•
Warns the driver and front passenger their seatbelt is not fastened.  
The buzzer sounds for 30 seconds if the driver or front passenger  
has not fastened their seatbelt and the vehicle speed exceeds 20  
km/h. After 30 seconds if the seatbelt remains unfastened the  
buzzer will sound a different tone for a further 90 seconds.  
Fasten the seatbelt  
90  
WHEN DRIVING  
Instrument cluster  
Warning Light  
Details  
Low fuel warning light  
Indicates remaining fuel is approximately 10.5 L or less.  
•
Refuel the vehicle  
Master warning light  
A buzzer sounds and the warning light comes on and flashes to  
indicate that the master warning system has detected a malfunction.  
“Warning messages” on page 93.  
*1: These warning lights illuminate when the ignition switch is turned to the ON position  
(vehicles with standard type ignition switch) or the ENGINE START STOP switch is  
pressed to IGNITION ON mode (vehicles with smart entry and start system) to indicate a  
system check is being performed. They turn off after the engine is started, or after a few  
seconds.  
There may be a malfunction in a system if a light does not come on, or if the lights do not  
turn off. Have the vehicle inspected by your Toyota dealer.  
*2: When the battery charge becomes insufficient or the voltage temporarily drops, the  
electric power steering system warning light may coon and the warning buzzer may  
sound.  
Centre panel  
Indicator–  
Security indicator (page 47)  
Warning light–  
Warning Light  
Details  
Rear passenger seatbelt warning light  
•
•
Warns the rear passengers their seatbelt is not fastened.  
The buzzer sounds for 30 seconds if a rear seat passenger has not  
fastened their seatbelt and the vehicle speed exceeds 20 km/h.  
After 30 seconds if the seatbelt remains unfastened the buzzer will  
sound a different tone for a further 90 seconds.  
Fasten the seatbelt  
91  
WHEN DRIVING  
Instrument cluster  
Outside rear view mirrors  
Indicator–  
BSM outside rear view mirror  
indicator (page 131)  
In order to confirm operation, the BSM  
outside rear view mirror indicators  
illuminate in the following situations.  
•
When the ENGINE START STOP  
switch is pressed to IGNITION ON  
mode with the BSM main switch set to  
ON.  
•
When the BSM main switch is set to ON while the ENGINE START STOP switch is in  
IGNITION ON mode.  
If the system is functioning correctly, the BSM outside rear view mirror indicators will turn  
off after a few seconds.  
CAUTION  
If a safety system warning light does not illuminate  
Should a safety system warning light such as thABS or SRS warning light not  
illuminate when you start the engine, this cold mean these systems are not available to  
help protect you in an accident, which cold result in death or serious injury.  
Have the vehicle inspected by your Toyota dealer immediately should this occur.  
CAUTION  
When the electric power steering system warning light comes on  
The steering wheel may become extremely heavy.  
If the steering wheel becomes heavier than usual when operating, hold firmly and  
operate using more force than usual.  
92  
WHEN DRIVING  
Instrument cluster  
MULTI-INFORMATION DISPLAY  
The multi-information display presents the  
driver with a variety of driving-related data.  
•
Warning messages (refer to below).  
Automatically displayed when a  
malfunction occurs in one of the  
vehicle’s systems.  
•
Trip information (refer to “Multi-  
information display driving related  
data” on page 103).  
Displays cruising range, fuel  
consumption and other cruising-  
related information.  
•
Toyota parking assist-sensor display  
(refer to “Toyota parking assist-  
sensor” on page 127).  
Warning messages  
1. Master warning light.  
The master warning light also comes  
on or flashes in order to indicate that a  
message is currently being displaed  
on the multi-information display. Refer  
to the following pages.  
2. Multi-information displa
If a warning is shown on the multi-information display, stay calm and perform the  
following actions. If any of the warning lights comes on again after the following actions  
have been performed, contact your Toyota dealer.  
93  
WHEN DRIVING  
Instrument cluster  
Have the vehicle inspected immediately–  
A buzzer sounds and a warning message is shown on the multi-information display. Failure  
to investigate the cause of the following warnings may lead to the system operating  
abnormally and possibly cause an accident. Have the vehicle inspected by your Toyota  
dealer immediately.  
Warning message  
Details  
•
•
Indicates a malfunction in the steering lock systemꢀ  
Indicates a malfunction in the smart entry and start  
systemꢀ  
A buzzer also sounds.  
(Flashes)  
Indicates a malfunction in the Toyota parking assist-sensorꢀ  
The malfunctioning assist-sensor is flashing.  
Indicates a malfunction in the cruise control systemꢀ  
Indicates a malfunction in the Blind Spot Monitorꢀ  
94  
WHEN DRIVING  
Instrument cluster  
Follow the correction procedures−  
A buzzer sounds and a warning message is shown on the multi-information display. After  
taking the specified steps to correct the suspected problem, check that the warning  
message goes off.  
Warning message  
Details  
Correction procedure  
Indicates that one or more of  
the doors is not fully closedꢀ  
The system also indicates  
which doors are not fully  
closed.  
Make sure that all the  
doors are closed.  
If the vehicle reaches a speed  
of 5 km/h,  
flashes and a  
buzzer sounds to iicate that  
the door(s) are ot yet fully  
closed.  
Indicates that the bonnet is  
not fully closedꢀ  
If the vehicle reaches  
a speed of 5 km/h,  
flashes and a buzzer  
sounds to indicate that  
the bonnet is not yet fully  
closed.  
Close the bonnet.  
95  
WHEN DRIVING  
Instrument cluster  
Warning message  
Details  
Correction procedure  
Indicates that the boot is not  
fully closedꢀ  
If the vehicle reaches a speed  
Close the boot  
of 5 km/h,  
flashes and a  
buzzer sounds to indicate that  
the boot is not yet fully closed.  
Indicates that the moon  
roof is not fully closed (with  
the ENGINE START STOP  
switch off and the driver’s  
door opened)ꢀ  
Close the moon roof.  
Release the parking brake.  
Clean the sensor  
(Flashes)  
Indicates, if the vehicle  
reaches a speed of 5 m/h,  
that the parking bake is  
still engagedꢀ  
A buzzer also sounds.  
(Flashes)  
Indicates that Toyota  
parking assist-sensor is  
dirty or covered with iceꢀ  
Indicates that the Blind  
Spot Monitor sensors or  
the surrounding area on the  
bumper is dirty or covered  
with iceꢀ  
Clean the sensor and its  
surrounding area on the  
bumper.  
96  
WHEN DRIVING  
Instrument cluster  
Rectify the malfunction immediately–  
After taking the specified steps to correct the suspected problem, check that the warning  
message and light go off.  
Interior Exterior  
Correction  
procedure  
Warning message  
Details  
buzzer  
buzzer  
The electronic key  
is not detected  
Start the engine  
Once  
—
when an attempt is with the electronic  
made to start the  
engine.  
key present.  
(Flashes)  
The electronic  
key was carred  
outside the vehicle  
and a door other  
thahe driver's  
dr was opened  
and closed while  
the ENGINE START  
STOP switch was  
in a mode other  
than off.  
Bring the  
electronic key back  
into the vehicle.  
Once  
3 times  
The electronic  
key was carried  
outside the vehicle  
and the driver’s  
door was opened  
and closed while  
the shift lever in  
P position was  
selected without  
turning off the  
(Flashes)  
Press the ENGINE  
START STOP  
switch off or bring  
the electronic  
key back into the  
vehicle.  
ENGINE START  
STOP switch.  
97  
WHEN DRIVING  
Instrument cluster  
Interior Exterior  
Correction  
procedure  
Warning message  
Details  
buzzer  
buzzer  
An attempt was  
made to exit the  
vehicle with the  
electronic key  
and lock the  
doors without  
first turning the  
ENGINE START  
STOP switch off.  
Press the ENGINE  
START STOP  
switch off and lock  
the doors again.  
Contin-  
uous  
Once  
(Displayed alternatively)  
(Flashes)  
An attempt was  
made to tart the  
engiwithout  
the electronic key  
eing present,  
or the electronic  
key was not  
Confirm that the  
electronic key is  
inside the vehicle.  
9 times  
—
functioning  
normally.  
An attempt was  
made to drive  
(Flashes)  
when the regular  
key was not inside  
the vehicle.  
The driver’s door  
was opened while  
any shift lever  
position other than  
P position was  
selected without  
turning off the  
ENGINE START  
STOP switch.  
Contin-  
uous  
Change the shift  
lever to P position.  
—
(Flashes)  
98  
WHEN DRIVING  
Instrument cluster  
Interior Exterior  
Correction  
procedure  
Warning message  
Details  
buzzer  
buzzer  
The electronic  
key was carried  
outside the vehicle  
and the driver’s  
door was opened  
and closed while  
any shift lever  
position other than  
P was selected  
without turning off  
the ENGINE START  
STOP switch.  
• Change the  
shift lever to P  
position.  
Contin-  
uous  
Contin-  
uous  
• Bring the  
electronic key  
back into the  
vehicle.  
(Displayed alternatively)  
(Flashes)  
An attempt was  
madto lock the  
drs using the  
smart entry and  
start system while  
the electronic key  
was still inside the  
vehicle.  
Retrieve the  
electronic key  
from the vehicle  
and lock the doors  
again.  
Contin-  
uous  
Once  
(Flashes)  
An attempt was  
made to lock  
either front door by  
opening a door and  
putting the inside  
lock button into  
the lock position,  
then closing the  
Retrieve the  
electronic key  
from the vehicle  
and lock the doors  
Contin-  
uous  
Once  
door by pulling on again.  
the outside door  
(Flashes)  
handle with the  
electronic key still  
inside the vehicle.  
99  
WHEN DRIVING  
Instrument cluster  
Interior Exterior  
Correction  
procedure  
Warning message  
Details  
• When the  
buzzer  
buzzer  
doors were  
unlocked with  
the mechanical  
key and then the  
ENGINE START  
STOP switch  
was pressed,  
the electronic  
key could not be  
detected in the  
vehicle.  
Touch the  
electronic key to  
the ENGINE START  
STOP switch while  
depressing the  
Once  
—
• The electronic  
key could not  
be detected  
brake pedal.  
(Flashes)  
in the ehicle  
eveafter the  
ENGINE START  
STOP switch  
was pressed  
two consecutive  
times.  
An attempt was  
made to start the  
engine with the  
shift lever in N  
position.  
Change the shift  
lever to P position  
and start the  
engine.  
Once  
—
(Flashes)  
Next time when  
starting the  
engine, increase  
the engine speed  
slightly and  
maintain that level  
for approximately  
5 minutes to  
Power was turned  
off due to the  
automatic power  
off function.  
—
—
recharge the  
battery.  
100  
WHEN DRIVING  
Instrument cluster  
Interior Exterior  
Correction  
procedure  
Warning message  
Details  
buzzer  
buzzer  
Replace the  
electronic key  
battery. Refer to  
“Replacing the  
remote control  
transmitter  
The electronic key  
has a low battery.  
Once  
—
battery”onpage296.  
The driver's door  
was opened and  
closed with the  
ENGINE START  
STOP switch  
turned off and  
then the ENGINE  
START STOP  
Press the ENGINE  
START STOP  
switch while  
depressing the  
brake pedal.  
switch was put  
in ACCESSORY  
mode twice  
without the engine  
being started.  
During an  
engine starting  
procedure, the  
electronic key was  
not functioning  
properly and the  
ENGINE START  
STOP switch was  
touched with the  
electronic key.  
Refer to “If the  
electronic key  
does not operate  
properly  
Once  
—
(Flashes)  
Press the ENGINE  
START STOP  
switch within 10  
seconds of the  
buzzer sounding.  
(smart entry and  
start system)” on  
page 315.  
101  
WHEN DRIVING  
Instrument cluster  
Interior Exterior  
Correction  
procedure  
Warning message  
Details  
buzzer  
buzzer  
Press the ENGINE  
START STOP  
switch while  
depressing the  
brake pedal  
and moving the  
steering wheel left  
and right.  
The steering  
lock could not be  
released within  
3 seconds of the  
ENGINE START  
STOP switch being  
pressed.  
Once  
—
(Flashes)  
The ENGINE  
START STOP  
switch has been  
turned off with  
the shift lever in a  
position othethan  
P or N.  
Change the shift  
lever to P position.  
Once  
—
(Flashes)  
After the ENGINE  
START STOP  
witch has been  
turned off with  
the shift lever in a  
Press the ENGINE  
START STOP  
Once  
—
position other than switch off.  
P, the shift lever  
has been shifted to  
P position.  
(Fashes)  
102  
WHEN DRIVING  
Instrument cluster  
Multi-information display driving related data  
Press the DISP button to scroll through the trip information contents.  
Without Paddle shift  
With Paddle shift  
CTY22AV479a  
Trip information contents  
Trip information contents  
Cruising range/average fuel  
consumption  
1
4
5
Customisation  
– (Off)  
2
3
Average vehicle speed / elapsed time  
Eco drive level  
103  
WHEN DRIVING  
Instrument cluster  
Trip information  
Cruising range / average fuel consumption−  
•
Cruising range  
Displays the estimated maximum distance that can be driven with the quantity of fuel  
remaining.  
–
This distance is computed based on your average fuel consumption. As a result,  
the actual distance that can be driven may differ from that displayed.  
–
When only a small amount of fuel is added to the tank, the display may not be  
updated.  
Vehicles with standard type ignition switch−  
When refuelling, turn the engine switch off. If the vehicle is refuelled without turning the  
engine switch off, the display may not be updated.  
Vehicles with a smart entry and start system−  
When refuelling, turn the ENGINE START STOP switch off. If the vehicle is refuelled  
without turning the ENGINE START STOP switch off, the display may not be updated.  
•
Average fuel consumption  
Displays the average fuel consumption since the function was reset.  
–
The function can be reset by pressing the DISP button for longer than 1 second  
when the average fuel consumption is dilayed.  
The average fuel consumption mer will also be reset, returning the needle to the  
0 position.  
–
Use the displayed average fuel consumption as a reference.  
Average vehicle speed / elapsed time−  
Displays the average vehicle speed and elapsed time since the engine was started.  
Eco drive level−  
Vehicles with standard type ignition switch−  
Displays the average fuel consumption and eco drive level since the engine was started.  
Even if a different screen has been selected for the multi-information display, when the  
engine switch is turned off, the eco drive level is displayed. This is not a malfunction.  
When the highest eco drive level has been achieved “EXCELLENT!” is displayed.  
Vehicles with a smart entry and start system−  
Displays the average fuel consumption and eco drive level since the engine was started.  
Even if a different screen has been selected for the multi-information display, when the  
“ENGINE START STOP” switch is turned off, the eco drive level is displayed. This is not a  
malfunction.  
When the highest eco drive level has been achieved “EXCELLENT!” is displayed.  
104  
WHEN DRIVING  
Instrument cluster  
Customising vehicle features  
It is possible to customise the language and Eco Driving Indicator light settings using the  
DISP button.  
When customising vehicle features, ensure that the vehicle is parked in a safe place with  
the shift lever in P position and the parking brake set.  
Language−  
Without Paddle shift  
1. While the vehicle is stopped press the  
DISP button to display the setting  
screen then press and hold the DISP  
button to display the customise mode  
screen.  
With Paddle shift  
CTY22AV480a  
2. Press the DISP butn to select the  
item to be set, hen press and hold the  
DISP button.  
105  
WHEN DRIVING  
Instrument cluster  
3. Press the DISP button to select the  
desired setting, and then press and  
hold the DISP button.  
To go back to the previous screen or exit  
the customise mode, press the DISP  
button to select EXIT, and then press and  
hold the DISP button.  
Eco Driving Indicator Light and the current  
fuel consumption screen−  
Without Paddle shift  
1. While the vehicle is stopped press the  
DISP button to display the setting  
screen then press and hold the DISP  
button to display the customise mode  
screen.  
With Paddle shift  
CTY22AV480a  
2. Press the DISP button to select the  
item to be set, then press and hold the  
DISP button.  
106  
WHEN DRIVING  
Instrument cluster  
3. Press the DISP button to select the  
desired setting, and then press and  
hold the DISP button.  
When the ECO INDICATOR is set to OFF,  
the current fuel consumption gauge will  
not be displayed.  
To go back to the previous screen or exit  
the customise mode, press the DISP  
button to select EXIT, and then press and  
hold the DISP button.  
NOTICE  
The multi-information display at low temperatures  
Allow the interior of the vehicle to warm up before using the liqucrystal information  
display. At extremely low temperatures, the information dispay monitor may respond  
slowly, and display changes may be delayed.  
107  

Related Topics

WHEN DRIVING

Driving procedures
Operating the lights and wipers
Using other driving systems (Cruise Control, BSM)
Driving Information (Run-in, Eco-driving, Towing)

Popular Owner Manuals

Audi
BMW
Citroen
Ford
Honda
Peugeot

Latest Owner Manuals

Fourth Generation (2021-2026) Skoda Fabia 4 Door Fourth Generation (2021-2026) Skoda Fabia 4 Door
Second Generation (2013-2019) Hyundai I10 4 Door Second Generation (2013-2019) Hyundai I10 4 Door
First Generation (2007-2012) Hyundai I10 4 Door First Generation (2007-2012) Hyundai I10 4 Door
Second Generation (2022-2026) Volvo XC40 SUV Second Generation (2022-2026) Volvo XC40 SUV
Fifth Generation (2023-2026) Toyota Prius 4 Door Fifth Generation (2023-2026) Toyota Prius 4 Door
Fourth Generation (2016-2022) Toyota Prius 4 Door Fourth Generation (2016-2022) Toyota Prius 4 Door
→