Audio system -> Bluetooth Phone for Your Toyota Auris 4 Door Second Generation (2013-2018)

®
392  
5-9. Bluetooth Phone  
Making a phone call  
To enter the “PHONE” or “TEL” mode, press the off-hook switch.  
Dialing by selecting a name  
1
Select “Phonebook” using the “<SELECT”, “TUNE>” and “SETUP/  
ENTER” buttons.  
2
Select the desired name using the “<SELECT”, “TUNE>” and  
“SETUP/ENTER” buttons and press the off-hook switch.  
By pressing  
“Add S. Dial” and then one of the speed dial but-  
tons while the desired name is selected, the selected item can be reg-  
istered as a speed dial.  
Press  
“A-Z” to display the registered names in alphabetical  
order of the initial.  
Speed dialing  
1
Select “Speed dials” using the “<SELECT”, “TUNE>” and “SETUP/  
ENTER” buttons.  
2
Press the desired preset button and press the off-hook switch.  
To delete a registered speed dial, after selecting the desired preset  
button press  
“Delete” and then press  
Yes”.  
Dialing by entering the number  
1
Select “Dial by number” using the “<SELECT”, “TUNE>” and  
“SETUP/ENTER” buttons.  
2
Enter the phone number and press the off-hook switch.  
®
393  
5-9. Bluetooth Phone  
Dialing from call histories  
1
Select “All calls”, “Missed calls”, “Incoming calls” or “Outgoing calls”  
using the “<SELECT”, “TUNE>” and “SETUP/ENTER” buttons.  
2
Select the desired number using the “<SELECT”, “TUNE>” and  
“SETUP/ENTER” buttons and press the off-hook switch.  
The following operations can be performed:  
Registering a number as a speed dial  
Press  
“Add S. Dial” and then press the desired preset but-  
ton.  
Deleting the selected number  
Press  
“Delete” and press  
Yes”.  
5
®
394  
5-9. Bluetooth Phone  
Receiving a phone call  
Answering the phone  
Press the off-hook switch.  
Refusing a call  
Press the on-hook switch.  
Receiving a call when on another call  
Press the off-hook switch.  
Pressing the off-hook switch again returns you to the previous call.  
Adjusting the ringtone volume when receiving a call  
Change the ringtone volume using the “VOL-” or “VOL+” button.  
To decrease the volume: Press the “VOL-” button.  
To increase the volume: Press the “VOL+” button.  
®
395  
5-9. Bluetooth Phone  
Speaking on the phone  
Transferring a call  
A call can be transferred between the cellular phone and system while  
dialing, receiving a call, or during a call. Use one of the following  
methods:  
a. Operate the cellular phone.  
Refer to the manual that comes with the cellular phone for the operation of  
the phone.  
b. Press  
* “Phone”.  
*: This operation can be performed only when transferring a call from the cel-  
lular phone to the system during a call.  
Muting your voice  
Press  
“Mute”.  
Inputting digits  
5
Press  
“0 - 9” and use the “<SELECT”, “TUNE>” and “SETUP/  
ENTER” buttons to input the desired digits.  
To send the input digits, press  
“Send”.  
“Wait” to return to the previous screen.  
• When finished, press  
Setting call volume  
Change the call volume using the “VOL-” or “VOL+” button.  
To decrease the volume: Press the “VOL-” button.  
To increase the volume: Press the “VOL+” button.  
®
396  
5-9. Bluetooth Phone  
When talking on the phone  
Do not talk at the same time as the other party.  
Keep the volume of the received voice down. Otherwise, voice echo will  
increase.  
Automatic volume adjustment  
When vehicle speed is 80 km/h (50 mph) or more, the volume automatically  
increases. The volume returns to the previous volume setting when vehicle  
speed drops to 70 km/h (43 mph) or less.  
Phone call system functions  
Depending on the cellular phone, certain functions may not be available.  
Situations where the system may not recognize your voice  
When driving on a rough road  
When driving at high speeds  
When air is blowing out of the vents onto the microphone  
When the air conditioning fan emits a loud noise