440
6-4. Other interior features
Panoramic roof shade (if equipped)
Use the overhead switch to open or close the panoramic roof shade.
Closing
1
Automatic full-closing (press
2
and hold)*
Opening
3
Automatic full-opening (press
4
and hold)*
*: Pressing either side of the switch
will stop the panoramic roof shade
travel partway.
■The panoramic roof shade can be operated when
X Vehicles without a smart entry & start system
The engine switch is in the “ON” position.
X Vehicles with a smart entry & start system
The engine switch is in IGNITION ON mode.
■Jam protection function
If an object is detected between the panoramic roof shade and the frame
while closing, travel is stopped and the panoramic roof shade opens slightly.
■If the panoramic roof shade does not open/close automatically
1
Press the open side of the switch to open the panoramic roof shade.
2
Press and hold the open side of the switch until the panoramic roof shade
opens fully and then closes slightly.
After this procedure is completed, check that the automatic opening/closing
function is available.
If the automatic opening/closing function does not work properly, have the
vehicle inspected by any authorized Toyota dealer or repairer, or another duly
qualified and equipped professional.