Get Vehicle specifications -> Specifications Guide for Toyota Auris 4 Door Second Generation (2013-2018)

606

9-1. Specifications

Maintenance data (fuel, oil level, etc.)

Dimensions and weights

Overall length

Overall width

Overall height*¹

Wheelbase

4330 mm (170.5 in.)

1760 mm (69.3 in.)

1475 mm (58.1 in.)

2600 mm (102.4 in.)

^{1535 mm (60.4 in.)}*²

1525 mm (60.0 in.)*³

1515 mm (59.6 in.)*^{4, 5}

Front

Rear

X 1NR-FE and 1ND-TV engines

^{1535 mm (60.4 in.)}*²

1525 mm (60.0 in.)*³

1515 mm (59.6 in.)*⁴

X 1ZR-FAE, 8NR-FTS and 1WW

engines

Tread

^{1525 mm (60.0 in.)}*²

1515 mm (59.6 in.)*³

1505 mm (59.3 in.)*⁵

X 1NR-FE engine

1735 kg (3826 lb.)

X 1ZR-FAE engine

^{1830 kg (4035 lb.)}*⁶

1805 kg (3980 lb.)*⁷

X 8NR-FTS engine

^{1845 kg (4068 lb.)}*⁶

1820 kg (4012 lb.)*⁷

X 1ND-TV engine

Gross vehicle mass

1820 kg (4012 lb.)

X 1WW engine

1890 kg (4167 lb.)

607

9-1. Specifications

X 1NR-FE, 1ZR-FAE, 8NR-FTS

and 1ND-TV engines

Maximum

permissible axle

capacity

1020 kg (2249 lb.)

X 1WW engine

Front

Rear

1080 kg (2381 lb.)

1010 kg (2227 lb.)

X 1NR-FE and 1ND-TV engines

55 kg (121 lb.)

Drawbar load

X 1ZR-FAE, 8NR-FTS and 1WW

engines

65 kg (143 lb.)

X 1NR-FE and 1ND-TV engines

1000 kg (2205 lb.)

With brake

X 1ZR-FAE, 8NR-FTS and 1WW

engines

Towing capacity

1300 kg (2867 lb.)

Without brake

450 kg (992 lb.)

*¹: Unladen vehicles

*²: Vehicles with 195/65R15 tires

*³: Vehicles with 205/55R16 tires

*⁴: Vehicles with 215/45R17 tires

*⁵: Vehicles with 225/45R17 tires

*⁶: Vehicles with a Multidrive

*⁷: Vehicles with a manual transmission

9

608

9-1. Specifications

Vehicle identification

■ Vehicle identification number

The vehicle identification number (VIN) is the legal identifier for

your vehicle. This is the primary identification number for your

Toyota. It is used in registering the ownership of your vehicle.

This number is stamped under

the right-hand front seat.

This number is also on the

manufacturer’s label.

609

9-1. Specifications

■ Engine number

The engine number is stamped on the engine block as shown.

X 1ZR-FAE engine

X 1NR-FE engine

X 8NR-FTS engine

X 1WW engine

X 1ND-TV engine

9

610

9-1. Specifications

Engine

X 1NR-FE and 1ZR-FAE engines

Model

Type

1NR-FE, 1ZR-FAE

4-cylinder in line, 4-cycle, gasoline

X 1NR-FE engine

72.5 × 80.5 mm (2.85 × 3.17 in.)

X 1ZR-FAE engine

Bore and stroke

Displacement

80.5 × 78.5 mm (3.17 × 3.09 in.)

X 1NR-FE engine

1329 cm³(81.1 cu. in.)

X 1ZR-FAE engine

1598 cm³(97.5 cu. in.)

Automatic adjustment

X 1NR-FE engine

Valve clearance

(engine cold)

Automatic adjustment

X 1ZR-FAE engine

7.6  10.0 mm (0.30  ^{0.39 in.)}*

Generator

Drive belt tension

Water pump

Crankshaft

Air

conditioning

compressor

*^{:Drive belt deflection with 98 N (10 kgf, 22 lbf) thumb}

force (used belt)

611

9-1. Specifications

X 8NR-FTS engine

Model

Type

8NR-FTS

4-cylinder in line, 4-cycle, gasoline (with turbo-

charger)

Bore and stroke

Displacement

71.5 × 74.5 mm (2.82 × 2.93 in.)

1197 cm³(73.0 cu. in.)

Valve clearance (engine

cold)

Automatic adjustment

Drive belt tension

X 1ND-TV and 1WW engines

Model

Type

1ND-TV, 1WW

4-cylinder in line, 4-cycle, diesel (with turbo-

charger)

X 1ND-TV engine

73.0 × 81.5 mm (2.87 × 3.21 in.)

X 1WW engine

Bore and stroke

Displacement

78.0 × 83.6 mm (3.07 × 3.29 in.)

X 1ND-TV engine

1364 cm³(83.2 cu. in.)

X 1WW engine

1598 cm³(97.52 cu. in.)

X 1ND-TV engine

Intake: 0.11  0.17 mm (0.004  0.007 in.)

Exhaust: 0.14  0.20 mm (0.006  0.008 in.)

X 1WW engine

Valve clearance (engine

cold)

Automatic adjustment

9

Drive belt tension

Automatic adjustment

612

9-1. Specifications

NOTICE

■Drive belt type (1ND-TV engine)

The high strength drive belt is used for the generator side drive belt. When

replacing the drive belt, use Toyota genuine drive belt or equivalent high

strength drive belt. If the high strength drive belt is not used, durability of the

belt may become less than expected. The high strength drive belt is a belt

with Aramid core which has higher strength compared to usually available

belts with PET or PEN core.

Fuel

X Gasoline engine

EU area:

Unleaded gasoline conforming to European

standard EN228 only

Fuel type

Except EU area:

Unleaded gasoline only

Research Octane

Number

95 or higher

Fuel tank capacity

(Reference)

50 L (13.2 gal., 11.0 Imp. gal.)

X Diesel engine

EU area:

Diesel fuel conforming to European standard

EN590

Fuel type

Except EU area:

Diesel fuel that contains 50 ppm or less of sulfur

Cetane number

48 or higher

Fuel tank capacity

(Reference)

50 L (13.2 gal., 11.0 Imp. gal.)

613

9-1. Specifications

Lubrication system

Oil capacity

(Drain and refill  ^reference*)

X 1NR-FE engine

With filter

3.4 L (3.6 qt., 3.0 Imp. qt.)

X 1ZR-FAE engine

4.2 L (4.4 qt., 3.7 Imp. qt.)

X 8NR-FTS engine

4.0 L (4.2 qt., 3.5 Imp. qt.)

X 1ND-TV engine

3.7 L (3.9 qt., 3.3 Imp. qt.)

X 1WW engine

5.2 L (5.5 qt., 4.6 Imp. qt.)

X 1NR-FE engine

Without filter

3.2 L (3.4 qt., 2.8 Imp. qt.)

X 1ZR-FAE engine

3.9 L (4.1 qt., 3.4 Imp. qt.)

X 8NR-FTS engine

3.7 L (3.9 qt., 3.3 Imp. qt.)

X 1ND-TV engine

3.3 L (3.5 qt., 2.9 Imp. qt.)

X 1WW engine

4.9 L (5.2 qt., 4.3 Imp. qt.)

*: The engine oil capacity is a reference quantity to be used when changing

the engine oil. Warm up and turn off the engine, wait more than 5 minutes,

and check the oil level on the dipstick.

■ Engine oil selection

X 1NR-FE and 1ZR-FAE engines

9

“Toyota Genuine Motor Oil” is used in your Toyota vehicle. Toyota

recommends the use of approved “Toyota Genuine Motor Oil”.

Another motor oil of matching quality can also be used.

Oil grade:

0W-20, 5W-30 and 10W-30:

API grade SL “Energy-Conserving”, SM “Energy-Conserving” or SN

“Resource-Conserving”; or ILSAC multigrade engine oil

15W-40:

API grade SL, SM or SN multigrade engine oil

614

9-1. Specifications

Recommended viscosity (SAE):

SAE 0W-20 is filled into your

Toyota vehicle at manufactur-

ing, and the best choice for

good fuel economy and good

starting in cold weather.

Preferred

If SAE 0W-20 oil is not avail-

able, SAE 5W-30 oil may be

used. However, it should be

replaced with SAE 0W-20 at the

next oil change.

Temperature range anticipated

before next oil change

If you use SAE 10W-30 or a

higher viscosity engine oil in

extremely low temperatures,

the engine may become difficult

to start, so SAE 0W-20 or 5W-

30 engine oil is recommended.

Oil viscosity (0W-20 is explained here as an example):

• The 0W in 0W-20 indicates the characteristic of the oil which

allows cold startability. Oils with a lower value before the W allow

for easier starting of the engine in cold weather.

• The 20 in 0W-20 indicates the viscosity characteristic of the oil

when the oil is at high temperature. An oil with a higher viscosity

(one with a higher value) may be better suited if the vehicle is

operated at high speeds, or under extreme load conditions.

615

9-1. Specifications

How to read oil container labels:

Either or both API registered marks are added to some oil contain-

ers to help you select the oil you should use.

API Service Symbol

1

Top portion: “API SERVICE SN”

means the oil quality designa-

tion by American Petroleum

Institute (API).

Center portion: “SAE 0W-20”

means the SAE viscosity grade.

Lower

portion:

“Resource-

Conserving” means that the oil

has fuel-saving and environ-

mental protection capabilities.

ILSAC Certification Mark

2

The International Lubricant Specification Advisory Committee (ILSAC)

Certification Mark is displayed on the front of the container.

X 8NR-FTS engine

“Toyota Genuine Motor Oil SAE 0W-20 for Downsized Turbo Gaso-

line Engines” is used in your Toyota vehicle. Use Toyota approved

“Toyota Genuine Motor Oil SAE 0W-20 for Downsized Turbo Gaso-

line Engines” or equivalent to satisfy the following grade and vis-

cosity.

Oil grade:

“Toyota Genuine Motor Oil SAE 0W-20 for Downsized Turbo Gaso-

line Engines” or API grade SL “Energy-Conserving”, SM “Energy-

Conserving” or SN “Resource-Conserving”; or ILSAC multigrade

engine oil

Viscosity grade:

SAE 0W-20 and 5W-30

9

616

9-1. Specifications

Recommended viscosity (SAE):

“Toyota Genuine Motor Oil SAE

0W-20 for Downsized Turbo

Gasoline Engines” is filled into

your Toyota vehicle at manufac-

turing, and SAE 0W-20 is the

best choice for good fuel econ-

omy and good starting in cold

weather.

Preferred

Temperature range anticipated

before next oil change

If SAE 0W-20 oil is not available, SAE 5W-30 oil may be used.

However, it should be replaced with SAE 0W-20 at the next oil

change.

Oil viscosity (0W-20 is explained here as an example):

• The 0W in 0W-20 indicates the characteristic of the oil which

allows cold startability. Oils with a lower value before the W allow

for easier starting of the engine in cold weather.

• The 20 in 0W-20 indicates the viscosity characteristic of the oil

when the oil is at high temperature. An oil with a higher viscosity

(one with a higher value) may be better suited if the vehicle is

operated at high speeds, or under extreme load conditions.

How to read oil container labels:

Either or both API registered marks are added to some oil contain-

ers to help you select the oil you should use.

API Service Symbol

1

Top portion: “API SERVICE SN”

means the oil quality designa-

tion by American Petroleum

Institute (API).

Center portion: “SAE 0W-20”

means the SAE viscosity grade.

Lower

portion:

“Resource-

Conserving” means that the oil

has fuel-saving and environ-

mental protection capabilities.

ILSAC Certification Mark

2

The International Lubricant Specification Advisory Committee (ILSAC)

Certification Mark is displayed on the front of the container.

617

9-1. Specifications

X 1ND-TV engine

“Toyota Genuine Motor Oil” is used in your Toyota vehicle. Toyota

recommends the use of approved “Toyota Genuine Motor Oil”.

Another motor oil of matching quality can also be used.

Oil grade: ACEA C2

NOTICE

Using engine oil other than ACEA C2 may damage the catalytic converter.

Recommended viscosity (SAE):

SAE 0W-30 is filled into your

Toyota vehicle at manufactur-

ing, and the best choice for

good fuel economy and good

starting in cold weather.

Preferred

Temperature range anticipated

before next oil change

Oil viscosity (0W-30 is explained here as an example):

• The 0W in 0W-30 indicates the characteristic of the oil which

allows cold startability. Oils with a lower value before the W allow

for easier starting of the engine in cold weather.

• The 30 in 0W-30 indicates the viscosity characteristic of the oil

when the oil is at high temperature. An oil with a higher viscosity

(one with a higher value) may be better suited if the vehicle is

operated at high speeds, or under extreme load conditions.

9

618

9-1. Specifications

X 1WW engine

Toyota recommends the use of approved “Toyota Genuine Motor

Oil 5W-30 Premium Fuel Economy for 1WW/2WW engines”. Con-

tact any authorized Toyota dealer or repairer, or another duly quali-

fied and equipped professional for usage of any other approved

engine oil of matching quality.

NOTICE

■To prevent damage to the engine

●Use of engine oils other than “Toyota Genuine Motor Oil 5W-30 Premium

Fuel Economy for 1WW/2WW engines” or any other approved engine oil,

may cause damage to the engine.

●If the approved oils are not available, up to 1 L (1.1 qt., 0.9 Imp. qt.) of the

following oils may be used: ACEA C3 oils.

Confirm that the viscosity grade is SAE 0W-40, 0W-30, 5W-40 or 5W-30.

Viscosities other than these, may damage the engine.

619

9-1. Specifications

Cooling system

X 1NR-FE, 1ZR-FAE and 1ND-TV engines

X

With exhaust heat recirculation system

5.7 L (6.0 qt., 5.0 Imp. qt.)

Without exhaust heat recirculation system

1NR-FE engine

1ZR-FAE engine

1ND-TV engine

X

4.7 L (5.0 qt., 4.1 Imp. qt.)

X Vehicles with a Multidrive

Capacity

(Refer-

ence)

5.8 L (6.1 qt., 5.1 Imp. qt.)

X Vehicles with a manual transmission

5.6 L (5.9 qt., 4.9 Imp. qt.)

X With power heater

6.0 L (6.3 qt., 5.3 Imp. qt.)

X Without power heater

5.6 L (5.9 qt., 4.9 Imp. qt.)

Use either of the following:

• “Toyota Super Long Life Coolant”

• Similar high-quality ethylene glycol-

based non-silicate, non-amine, non-

nitrite, and non-borate coolant with

long-life hybrid organic acid technology

Do not use plain water alone.

Coolant type

X 8NR-FTS engine

Capacity (reference)

Gasoline engine

X Vehicles with a Multidrive

6.4 L (6.8 qt., 5.6 Imp. qt.)

X Vehicles with a manual transmission

6.2 L (6.6 qt., 5.5 Imp. qt.)

9

2.1 L (2.2 qt., 1.8 Imp. qt.)

Intercooler

Use either of the following:

• “Toyota Super Long Life Coolant”

• Similar high-quality ethylene glycol-

based non-silicate, non-amine, non-

nitrite, and non-borate coolant with

long-life hybrid organic acid technology

Do not use plain water alone.

Coolant type

620

9-1. Specifications

X 1WW engine

X With power heater

7.3 L (7.7 qt., 6.4 Imp. qt.)

X Without power heater

Capacity (reference)

7.0 L (7.4 qt., 6.2 Imp. qt.)

“Toyota Genuine Premium Long Life Cool-

ant 1WW/2WW” or equivalent. “Toyota

Genuine Premium Long Life Coolant 1WW/

2WW” concentrated product always needs

to be mixed as 50% coolant and 50%

deionized water. Do not use plain water

alone.

Coolant type

Contact any authorized Toyota dealer or

repairer, or another duly qualified and

equipped professional for usage of any

other approved engine coolant of matching

quality.

Ignition system (gasoline engine)

Spark plug

X 1NR-FE engine

DENSO SC16HR11

X 1ZR-FAE engine

Make

DENSO SC16HR11 or DENSO SC20HR11

X 8NR-FTS engine

NGK DILKAR8J9G

X 1NR-FE and 1ZR-FAE engines

1.1 mm (0.043 in.)

X 8NR-FTS engine

Gap

0.9 mm (0.035 in.)

NOTICE

■Iridium-tipped spark plugs

Use only iridium-tipped spark plugs. Do not adjust the spark plug gap.

621

9-1. Specifications

Electrical system

Battery

Open voltage at 20°C 12.6  12.8 V Fully charged

(68°F):

12.2  12.4 V Half charged

11.8  12.0 V Discharged

(Voltage is checked 20 minutes after the engine

and all lights are turned off.)

Charging rates

5 A max.

Multidrive

Fluid capacity*

Fluid type

7.5 L (7.9 qt., 6.6 Imp. qt.)

Toyota Genuine CVT Fluid FE

*: The fluid capacity is a reference quantity.

If replacement is necessary, contact any authorized Toyota dealer or

repairer, or another duly qualified and equipped professional.

NOTICE

■Multidrive fluid type

Using Multidrive fluid other than “Toyota Genuine CVT Fluid FE” may cause

deterioration in shift quality, locking up of your transmission accompanied

by vibration, and ultimately damage to the transmission of your vehicle.

Manual transaxle

X 1WW engine

2.1 L (2.2 qt., 1.8 Imp. qt.)

Gear oil capacity (Reference)

X Except 1WW engine

2.4 L (2.5 qt., 2.1 Imp. qt.)

9

Use either of the following:

• “TOYOTA Genuine Manual Transmis-

Gear oil type

sion Gear Oil LV”

• Other gear oil that meets API GL-4

and SAE 75W specifications

622

9-1. Specifications

NOTICE

■Manual transaxle gear oil

Please be aware that depending on the particular characteristics of the gear

oil used or the operating conditions, idle sound, shift feeling and/or fuel effi-

ciency may be different or affected. Toyota recommends to use “TOYOTA

Genuine Manual Transmission Gear Oil LV” to achieve optimal perfor-

mance.

Clutch

Pedal free play

Fluid type

5  15 mm (0.2  0.6 in.)

SAE J1703 or FMVSS No.116 DOT 3 or

SAE J1704 or FMVSS No.116 DOT 4

Brakes

Pedal clearance*¹

Left-hand drive vehicles 63 mm (2.48 in.) Min.

Right-hand drive vehi- 73 mm (2.87 in.) Min.

cles

Pedal free play

1  6 mm (0.04  0.24 in.)

5  8 clicks

Parking brake lever

^travel*²

SAE J1703 or FMVSS No.116 DOT 3 or

SAE J1704 or FMVSS No.116 DOT 4

Fluid type

*¹: Minimum pedal clearance when depressed with a force of 294 N (30 kgf,

66 lbf) while the engine is running

*²: Parking brake lever travel when pulled up with a force of 200 N (20.4 kgf,

45.0 lbf)

Steering

Free play

Less than 30 mm (1.2 in.)

623

9-1. Specifications

Tires and wheels

X 15-inch tires

Tire size

195/65R15 91H

Vehicle speed

Front

wheel Rear

wheel

kPa (kgf/cm²kPa (kgf/cm²

or bar, psi)

Tire inflation pres-

sure

(Recommended

cold tire inflation

pressure)

Type A*:

More than 160

km/h (100 mph)

260 (2.6, 38)

^{Type B}*:

260 (2.6, 38)

^{Type B}*:

270 (2.7, 39)

Type A*:

160 km/h (100 230 (2.3, 33)

230 (2.3, 33)

^{Type B}*:

mph) or less

^{Type B}*:

240 (2.4, 35)

Wheel size

15 × 6 J

Wheel nut torque

103 N•m (10.5 kgf•m, 76 ft•lbf)

*: The tire inflation pressure is specified on the tire-loading information label.

(→P. 496)

9

624

9-1. Specifications

X 16-inch and 17-inch tires

Tire size

205/55R16 91V, 215/45R17 87W, 225/45R17 91W

Front wheel Rear wheel

Vehicle speed

kPa (kgf/cm²kPa (kgf/cm²

Tire inflation pres-

sure

or bar, psi)

(Recommended

cold tire inflation km/h (100 mph)

More than 160

260 (2.6, 38)

pressure)

160 km/h (100

230 (2.3, 33)

mph) or less

16 × 6 1/2 J (16-inch tires),

17 × 7 J (17-inch tires)

Wheel size

Wheel nut torque

103 N•m (10.5 kgf•m, 76 ft•lbf)

X Compact spare tire

Tire size

T125/70D17 98M

Tire inflation pressure

(Recommended

cold 420 kPa (4.2 kgf/cm²or bar, 60 psi)

tire inflation pressure)

Wheel size

17 × 4 T

Wheel nut torque

103 N•m (10.5 kgf•m, 76 ft•lbf)

■When towing a trailer

Add 20.0 kPa (0.2 kgf/cm²or bar, 3 psi) to the recommended tire inflation

pressure and drive at speeds below 100 km/h (62 mph).

625

9-1. Specifications

Light bulbs

Light Bulbs

Halogen headlights*

W

55

19

21

5

Type

A

Front fog lights*

B

Front turn signal lights

Side turn signal lights

Rear turn signal lights

Stop lights

C

D

E

Exterior

21

16

5

Back-up light

F

Licence plate lights

Vanity lights*

F

5

G

F

Front interior lights/personal lights

Rear interior light*

Rear personal lights*

Luggage compartment light

8

Interior

8

G

F

8

5

G

A: HIR2 halogen bulbs

C: Wedge base bulbs (amber)

E: Single end bulbs (clear)

G: Double end bulbs

B: H16 halogen bulbs

D: Single end bulbs (amber)

F: Wedge base bulbs (clear)

*: If equipped

9

626

9-1. Specifications

Fuel information

X Gasoline engine

EU area:

You must only use unleaded gasoline conforming to European

standard EN228.

Select unleaded gasoline with a Research Octane Number of 95

or higher for optimum engine performance.

Except EU area:

You must only use unleaded gasoline.

Select unleaded gasoline with a Research Octane Number of 95

or higher for optimum engine performance.

X Diesel engine

EU area:

You must only use diesel fuel conforming to European standard

EN590.

Except EU area:

You must only use diesel fuel that contains 50 ppm or less of

sulfur with a cetane number of 48 or higher.

■Use of ethanol blended gasoline in a gasoline engine

Toyota allows the use of ethanol blended gasoline where the ethanol content

is up to 10%. Make sure that the ethanol blended gasoline to be used has a

Research Octane Number that follows the above.

■If you plan to drive in foreign countries (diesel engine)

Low sulfur diesel fuel may not be available, so please check the availability

with your distributor.

■If your engine knocks

●Consult any authorized Toyota dealer or repairer, or another duly qualified

and equipped professional.

●You may occasionally notice light knocking for a short time while accelerat-

ing or driving uphill. This is normal and there is no need for concern.

627

9-1. Specifications

NOTICE

■Notice on fuel quality

●Do not use improper fuels. If improper fuels are used, the engine will be

damaged.

●Gasoline engine: Do not use leaded gasoline.

Leaded gasoline will cause the three-way catalytic converter to lose its

effectiveness and the emission control system to function improperly.

●Diesel engine: Do not use a fuel that contains more than 50 ppm of sulfur.

Use of such a high sulfur fuel may damage the engine.

●Gasoline engine (EU area): Bioethanol fuel sold under names such as

“E50” or “E85” and fuel containing a large amount of ethanol should not be

used. The use of these fuels will damage the vehicle’s fuel system. In case

of any doubt, ask any authorized Toyota dealer or repairer, or another duly

qualified and equipped professional.

●Gasoline engine (except EU area): Bioethanol fuel sold under names such

as “E50” or “E85” and fuel containing a large amount of ethanol should not

be used. Your vehicle can use gasoline mixed with 10% max ethanol. The

use of fuel with more than 10% ethanol content (E10) will damage the

vehicle’s fuel system. You must ensure that refueling is carried out only

from a source where fuel specification and quality can be guaranteed. In

case of any doubt, ask any authorized Toyota dealer or repairer, or another

duly qualified and equipped professional.

●Gasoline engine: Do not use the methanol blended gasoline such as M15,

M85, M100. The use of gasoline containing methanol may cause engine

damage or failure.

●Diesel engine (EU area): FAME (Fatty Acid Methyl Ester) fuel sold under

names such as “B30” or “B100” and fuel containing a large amount of

FAME should not be used. The use of these fuels will damage the vehi-

cle’s fuel system. In case of any doubt, ask any authorized Toyota dealer

or repairer, or another duly qualified and equipped professional.

●Diesel engine (except EU area): FAME (Fatty Acid Methyl Ester) fuel sold

under names such as “B30” or “B100” and fuel containing a large amount

of FAME should not be used. Your vehicle can use diesel mixed with 5%

max biodiesel FAME (B5). The use of fuel with more than 5% FAME con-

tent (B5) will damage the vehicle’s fuel system. You must ensure that refu-

eling is carried out only from a source where fuel specification and quality

can be guaranteed. In case of any doubt, ask any authorized Toyota

dealer or repairer, or another duly qualified and equipped professional.

9

Vehicle specifications -> Specifications for Your Toyota Auris 4 Door Second Generation (2013-2018)

Related Topics

Vehicle specifications

Popular Owner Manuals

Latest Owner Manuals