2005-2012 Toyota Avalon 4 Door When driving -> Operating the lights and windshield wipers User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

When driving -> Operating the lights and windshield wipers for Your Toyota Avalon 4 Door Third Generation (2005-2012)

2-3. Operating the lights and windshield wipers  
Headlight switch  
The headlights can be operated manually or automatically.  
U.S.A.  
The side marker, park-  
ing, tail, license plate  
and instrument panel  
lights turn on.  
2
The headlights and all  
lights listed above turn  
on.  
The headlights and all  
the lights listed above  
turn on and off auto-  
matically. (When the  
“ENGINE  
START  
Canada  
STOP” switch is in  
IGNITION ON mode  
[vehicles with smart  
key system] or the  
engine switch is in the  
“ON” position [vehi-  
cles without smart key  
system].)  
Turn off the daytime  
running light system.  
(if equipped)  
173  
2-3. Operating the lights and windshield wipers  
Turning on the high beam headlights  
With the headlights on, push  
the lever forward to turn on the  
high beams.  
Pull the lever back to the center  
position to turn the high beams  
off.  
Pull the lever toward you to  
turn on the high beams.  
Release to turn them off. You can  
flash the high beams with the  
headlights on or off.  
Daytime running light system (if equipped)  
To make your vehicle more visible to other drivers, the headlights turn on  
automatically (at a reduced intensity) whenever the engine is started and the  
parking brake is released. Daytime running lights are not designed for use at  
night.  
Headlight control sensor  
The sensor may not function properly if  
an object is placed on the sensor, or any-  
thing that blocks the sensor is affixed to  
the windshield.  
Doing so interferes with the sensor  
detecting the level of ambient light and  
may cause the automatic headlight con-  
trol system to malfunction.  
174  
2-3. Operating the lights and windshield wipers  
Automatic light off system  
Vehicles with smart key system  
The headlights and tail lights turn off 30 seconds after a door is opened or  
closed if the “ENGINE START STOP” switch has been turned to ACCES-  
SORY or turned OFF while the headlights are turned on. (The lights turn off  
immediately if the  
locked.)  
button on the key is pressed after all doors are  
To turn the lights on again, turn the “ENGINE START STOP” switch to IGNI-  
TION ON mode, or turn the light switch OFF once and then back to the  
2
or  
position.  
Vehicles without smart key system  
The headlights and tail lights turn off 30 seconds after a door is opened or  
closed if the engine switch has been turned to the “ACC” or “LOCK” position  
while the headlights are turned on. (The lights turn off immediately if the  
button on the key is pressed after all doors are locked.)  
To turn the lights on again, turn the engine switch to the “ON” position, or  
turn the light switch OFF once and then back to the  
or  
position.  
Customization that can be configured at Toyota dealer  
Settings (e.g. light sensor sensitivity) can be changed.  
(Customizable features P. 530)  
NOTICE  
To prevent battery discharge  
Do not leave the lights on longer than necessary if the engine is not running.  
175  
2-3. Operating the lights and windshield wipers  
Fog light switch  
The fog lights improve visibility in difficult driving conditions, such  
as in rain or fog. They can be turned on only when the headlights are  
on low beam.  
OFF  
ON  
176  
2-3. Operating the lights and windshield wipers  
Windshield wipers and washer  
Intermittent wiper with interval adjuster (if equipped)  
Wiper intervals can be adjusted for intermittent operation (when  
is selected).  
Intermittent wiper operation  
Low speed wiper operation  
High speed wiper operation  
Temporary operation  
2
Increases the intermittent  
windshield wiper frequency  
Decreases the intermittent  
windshield wiper frequency  
177  
2-3. Operating the lights and windshield wipers  
Wash/wipe operation  
Wipers will automatically oper-  
ate a couple of times after the  
washer squirts.  
Raindrop detection windshield wipers (if equipped)  
With “AUTO” selected, the wipers will operate automatically  
when the sensor detects falling rain. The system automatically  
adjusts wiper timing in accordance with rain volume and vehicle  
speed.  
Raindrop detection wiper  
operation  
Low speed wiper operation  
High speed wiper operation  
Temporary operation  
178  
2-3. Operating the lights and windshield wipers  
Sensor sensitivity (high)  
Sensor sensitivity (low)  
2
Wash/wipe operation  
Wipers will automatically oper-  
ate a couple of times after the  
washer squirts.  
The windshield wiper and washer can be operated when  
Vehicles with smart key system  
The “ENGINE START STOP” switch is in IGNITION ON mode.  
Vehicles without smart key system  
The engine switch is in the “ON” position.  
179  
2-3. Operating the lights and windshield wipers  
Effects of vehicle speed on wiper operation  
Vehicle speed affects the following even when the wipers are not in “AUTO”  
mode.  
Intermittent wiper interval (  
mode)  
Wiper operation when the washer is being used  
With low speed mode, wiper operation will be switched from low speed to  
intermittent wiper operation only when the vehicle is stationary.  
Rain drop sensor (vehicles equipped with the raindrop detection wind-  
shield wipers)  
The sensor judges the amount of rain-  
drops.  
An optical sensor is adopted. It may not  
operate properly when sunlight from the  
rising or setting of the sun intermittently  
strikes the windshield, or if bugs etc.  
are present on the windshield.  
If the wiper switch is turned to the “AUTO” position while the “ENGINE  
START STOP” switch is in ON mode, the wipers will operate once to  
show that “AUTO” mode is activated.  
If the temperature of the raindrop sensor is 194 °F (90 °C) or higher, or  
14 °F (-10 °C) or lower, automatic operation may not occur. In this case,  
operate the wipers in any mode other than “AUTO”.  
If no windshield washer fluid sprays  
Check that the washer nozzles are not blocked if there is washer fluid in the  
windshield washer fluid reservoir.  
Customization that can be configured at Toyota dealer  
Settings (e.g. switching operation when the vehicle is stationary) can be  
changed. (Customizable features P. 533)  
180  
2-3. Operating the lights and windshield wipers  
CAUTION  
Caution regarding the use of windshield wipers in “AUTO” mode  
The windshield wipers may operate unexpectedly if the sensor is touched or  
the windshield is subject to vibration in “AUTO” mode. Take care that your  
fingers or anything else do not become caught in the windshield wipers.  
NOTICE  
2
When the windshield is dry  
Do not use the wipers, as they may damage the windshield.  
When there is no washer fluid spray from the nozzle  
Damage to the washer fluid pump may be caused if the lever is pulled  
toward you and held continually.  
When a nozzle becomes blocked  
In this case, contact your Toyota dealer immediately.  
Do not try to clear it with a pin or other object. The nozzle will be damaged.  
181  

Related Topics

Popular Owner Manuals