Get Operation of each component -> Driving position memory Guide for Toyota Avalon 4 Door Fifth Generation (2019-2022)

146

3-3. Adjusting the seats

Driving position m em or y^

This feature automatically adjusts the driver’s seat, steering

wheel and outside rear view mirrors to make entering and exit-

ing the vehicle easier or to suit your preferences.

Power easy access system

The seat and steering wheel are automatically adjusted to allow the

driver to enter and exit the vehicle easily.

When all of the following have

been performed, the driver’s seat

and steering wheel are automati-

cally adjusted to a position that

allows driver to enter and exit the

vehicle easily.

• The shift lever has been shifted

to P.

• The engine switch has been

turned off.

• The driver’s seat belt has been unfastened.

When any of the following has been performed, the driver’s seat and

steering wheel automatically return to their original positions.

• The engine switch has been turned to ACCESSORY mode or IGNI-

TION ON mode.

• The driver’s seat belt has been fastened.

■Operation of the power easy access system

When exiting the vehicle, the power easy access system may not operate if

the seat is already close to the rearmost position, etc.

■Customization

Some functions can be customized. (P. 505)

: If equipped

147

3-3. Adjusting the seats

Driving position memory

Your preferred driving position (the position of the driver’s seat, steer-

ing wheel and outside rear view mirrors) can be recorded and recalled

by pressing a button.

Two different driving positions can be recorded into memory.

■ Recording procedure

1

Check that the shift lever is in P.

2

Turn the engine switch to IGNITION ON mode.

3

Adjust the driver’s seat, steering wheel, and outside rear view

mirrors to the desired positions.

4

While pressing the “SET”

3

button, or within 3 seconds

after the “SET” button is

pressed, press button “1” or

“2” until the buzzer sounds.

If the selected button has

already been preset, the previ-

ously recorded position will be

overwritten.

■ Recall procedure

1

Check that the shift lever is in P.

2

Turn the engine switch to IGNITION ON mode.

3

Press one of the buttons for

the driving position you want

to recall until the buzzer

sounds.

148

3-3. Adjusting the seats

■To stop the position recall operation part-way through

Perform any of the following operations:

●Press the “SET” button.

●Press button “1” or “2”.

●Operate any of the seat adjustment switches (only cancels seat position

recall).

●Operate the tilt and telescopic steering control switch (only cancels steering

wheel position recall).

■Seat positions that can be memorized (P. 142)

The adjusted positions other than the position adjusted by lumbar support

switch can be recorded.

■Operating the driving position memory after turning the engine switch

off

Recorded seat positions can be activated up to 180 seconds after the driver’s

door is opened and another 60 seconds after it is closed again.

■In order to correctly use the driving position memory function

If a seat position is already in the furthest possible position and the seat is

operated in the same direction, the recorded position may be slightly different

when it is recalled.

149

3-3. Adjusting the seats

Memory recall function

Each electronic key can be registered to recall your preferred driving

position.

■ Registering procedure

Record your driving position to button 1 or 2 before performing the

following:

Carry only the key you want to register, and then close the driver’s

door.

If 2 or more keys are in the vehicle, the driving position cannot be

recorded properly.

1

Check that the shift lever is in P.

3

2

Turn the engine switch to IGNITION ON mode.

3

Recall the driving position that you want to record.

4

While pressing the recalled

button, press and hold the

door lock switch (either lock

or unlock) until the buzzer

sounds.

If the button could not be regis-

tered, the buzzer sounds contin-

uously for approximately

seconds.

3

■ Recall procedure

1

Make sure that the doors are locked before recalling the driving

position. Carry the electronic key that has been registered to the

driving position, and then unlock and open the driver’s door using

the smart key system or wireless remote control.

The driving position will move to the recorded position (not including the

steering wheel).

If the driving position is in a position that has already been recorded, the

seat and outside rear view mirrors will not move.

2

Turn the engine switch to ACCESSORY mode or IGNITION ON

mode.

The seat and steering wheel will move to the recorded position.

150

3-3. Adjusting the seats

■ Cancelation procedure

Carry only the key you want to cancel and then close the driver’s

door.

If 2 or more keys are in the vehicle, the driving position cannot be

canceled properly.

1

Turn the engine switch to IGNITION ON mode.

2

While pressing the “SET” button, press and hold the door lock

switch (either lock or unlock) until the buzzer sounds twice.

If it button could not be canceled, the buzzer sounds continuously for

approximately 3 seconds.

■Recalling the driving position using the memory recall function

●Different driving positions can be registered for each electronic key. There-

fore, the driving position that is recalled may be different depending on the

key being carried.

●If a door other than the driver’s door is unlocked with the smart key system,

the driving position cannot be recalled. In this case, press the driving posi-

tion button which has been set.

■Customization

Some functions can be customized. (P. 505)

WARNING

■Seat adjustment caution

Take care during seat adjustment so that the seat does not strike the rear

passenger or squeeze your body against the steering wheel.

Operation of each component -> Driving position memory for Your Toyota Avalon 4 Door Fifth Generation (2019-2022)

Related Topics

Popular Owner Manuals

Latest Owner Manuals