Get Operation of each component -> Opening and closing the windows Guide for Toyota Avalon 4 Door Fifth Generation (2019-2022)

160

3-5. Opening and closing the windows

Pow er w indow s

Opening and closing procedures

The power windows can be opened and closed using the switches.

Operating the switch moves the windows as follows:

Closing

1

One-touch closing*

2

Opening

3

One-touch opening*

4

*: To stop the window partway, oper-

ate the switch in the opposite direc-

tion.

Window lock switch

Press the switch to lock the pas-

senger window switches.

Use this switch to prevent children

from accidentally opening or clos-

ing a passenger window.

■The power windows can be operated when

The engine switch is in IGNITION ON mode.

■Operating the power windows after turning the engine off

The power windows can be operated for approximately 45 seconds even

after the engine switch is turned to ACCESSORY mode or turned off. They

cannot, however, be operated once either front door is opened.

■Jam protection function

If an object becomes jammed between the window and the window frame

while the window is closing, window movement is stopped and the window is

opened slightly.

■Catch protection function

If an object becomes caught between the door and window while the window

is opening, window movement is stopped.

161

3-5. Opening and closing the windows

■When the window cannot be opened or closed

When the jam protection function or catch protection function operates

unusually and the door window cannot be opened or closed, perform the fol-

lowing operations with the power window switch of that door.

●Stop the vehicle. With the engine switch in IGNITION ON mode, within 4

seconds of the jam protection function or catch protection function activat-

ing, continuously operate the power window switch in the one-touch closing

direction or one-touch opening direction so that the door window can be

opened and closed.

●If the door window cannot be opened and closed even when performing the

above operations, perform the following procedure for function initialization.

Turn the engine switch to IGNITION ON mode.

1

Pull and hold the power window switch in the one-touch closing direction

2

and completely close the door window.

3

Release the power window switch for a moment, resume pulling the

3

switch in the one-touch closing direction, and hold it there for approxi-

mately 6 seconds or more.

Press and hold the power window switch in the one-touch opening direc-

4

tion. After the door window is completely opened, continue holding the

switch for an additional 1 second or more.

Release the power window switch for a moment, resume pushing the

5

switch in the one-touch opening direction, and hold it there for approxi-

mately 4 seconds or more.

Pull and hold the power window switch in the one-touch closing direction

6

again. After the door window is completely closed, continue holding the

switch for a further 1 second or more.

If you release the switch while the window is moving, start again from the

beginning.

If the window reverses and cannot be fully closed or opened, have the vehicle

inspected by your Toyota dealer.

162

3-5. Opening and closing the windows

■Door lock linked window operation

●The power windows can be opened and closed using the mechanical key.*

(P. 463)

●The power windows can be opened using the wireless remote control.*

(P. 125)

*: These settings must be customized at your Toyota dealer.

■Alarm

The alarm may be triggered if the alarm is set and a power window is closed

using the door lock linked power window operation function. (P. 81)

■Power windows open warning buzzer

A buzzer sounds and a message is shown on the multi-information display in

the instrument cluster when the engine switch is turned off and the driver’s

door is opened with the power windows open.

■Customization

Some functions can be customized. (P. 505)

163

3-5. Opening and closing the windows

WARNING

Observe the following precautions.

Failing to do so may result in death or serious injury.

■Opening and closing the windows

●The driver is responsible for all the power window operations, including the

operation for the passengers. In order to prevent accidental operation,

especially by a child, do not let a child operate the power windows. It is

possible for children and other passengers to have body parts caught in

the power window. Also, when riding with a child, it is recommended to use

the window lock switch.(P. 160)

●Check to make sure that all passengers

do not have any part of their body in a

position where it could be caught when

a window is being operated.

3

●When using the wireless remote control or mechanical key and operating

the power windows, operate the power window after checking to make

sure that there is no possibility of any passenger having any of their body

parts caught in the window. Also do not let a child operate window by the

wireless remote control or mechanical key. It is possible for children and

other passengers to get caught in the power window.

●When exiting the vehicle, turn the engine switch off, carry the key and exit

the vehicle along with the child. There may be accidental operation, due to

mischief, etc., that may possibly lead to an accident.

■Jam protection function

●Never use any part of your body to intentionally activate the jam protection

function.

●The jam protection function may not work if something gets jammed just

before the window is fully closed. Be careful not to get any part of your

body jammed in the window.

■Catch protection function

●Never use any part of your body or clothing to intentionally activate the

catch protection function.

●The catch protection function may not work if something gets caught just

before the window is fully opened. Be careful not to get any part of your

body or clothing caught in the window.

164

3-5. Opening and closing the windows

Moon roof^

Use the overhead switches to open and close the moon roof and

tilt it up and down.

Opening and closing

Opens the moon roof*

1

The moon roof stops slightly before

the fully open position to reduce

wind noise.

Press the switch again to fully open

the moon roof.

Closes the moon roof*

2

*: Lightly press either side of the

moon roof switch to stop the moon

roof partway.

Tilting up and down

Tilts the moon roof up*

1

Tilts the moon roof down*

2

*: Lightly press either side of the

moon roof switch to stop the moon

roof partway.

: If equipped

165

3-5. Opening and closing the windows

■The moon roof can be operated when

The engine switch is in IGNITION ON mode.

■Operating the moon roof after turning the engine off

The moon roof can be operated for approximately 45 seconds after the

engine switch is turned to ACCESSORY mode or turned off. It cannot, how-

ever, be operated once either front door is opened.

■Jam protection function

If an object is detected between the moon roof and the frame while the moon

roof is closing or tilting down, travel is stopped and the moon roof opens

slightly.

■Sunshade

The sunshade can be opened and closed manually. However, the sunshade

will open automatically when the moon roof is opened.

3

■Door lock linked moon roof operation

●The moon roof can be opened and closed using the mechanical key.*

(P. 463)

●The moon roof can be opened using the wireless remote control.*

(P. 125)

*: These settings must be customized at your Toyota dealer.

166

3-5. Opening and closing the windows

■When the moon roof does not close normally

Perform the following procedure:

●If the moon roof closes but then re-opens slightly

1

Stop the vehicle.

2

Press and hold the “CLOSE” switch.*¹

The moon roof will close, reopen and pause for approximately 10 sec-

onds.*²Then it will close again, tilt up and pause for approximately 1 sec-

ond. Finally, it will tilt down, open and close.

3

Check to make sure that the moon roof is completely closed and then

release the switch.

●If the moon roof tilts down but then tilts back up

1

Stop the vehicle.

2

Press and hold the “UP” switch*¹until the moon roof moves into the tilt

up position and stops.

3

Release the “UP” switch once and then press and hold the “UP” switch

again.*¹

The moon roof will pause for approximately 10 seconds in the tilt up posi-

tion.*²Then it will adjust slightly and pause for approximately 1 second.

Finally, it will tilt down, open and close.

4

Check to make sure that the moon roof is completely closed and then

release the switch.

*¹: If the switch is released at the incorrect time, the procedure will have to

be performed again from the beginning.

*²: If the switch is released after the above mentioned 10 second pause,

automatic operation will be disabled. In that case, press and hold the

“CLOSE” or “UP” switch, and the moon roof will tilt up and pause for

approximately 1 second. Then it will tilt down, open and close. Check to

make sure that the moon roof is completely closed and then release the

switch.

If the moon roof does not fully close even after performing the above proce-

dure correctly, have the vehicle inspected by your Toyota dealer.

■Alarm

The alarm may be triggered if the alarm is set and the moon roof is closed

using the door lock linked moon roof operation function. (P. 80)

■Moon roof open warning buzzer

A buzzer sounds and a message is shown on the multi-information display in

the instrument cluster when the engine switch is turned off and the driver's

door is opened with the moon roof open.

■Customization

Some functions can be customized. (P. 505)

167

3-5. Opening and closing the windows

WARNING

Observe the following precautions.

Failing to do so may cause death or serious injury.

■Opening the moon roof

●Do not allow any passengers to put their hands or heads outside the vehi-

cle while it is moving.

●Do not sit on top of the moon roof.

■Opening and closing the moon roof

●The driver is responsible for moon roof opening and closing operations.

In order to prevent accidental operation, especially by a child, do not let a

child operate the moon roof. It is possible for children and other passen-

gers to have body parts caught in the moon roof.

3

●Check to make sure that all passengers

do not have any part of their body in a

position where it could be caught when

the moon roof is being operated.

●When using the wireless remote control

or mechanical key and operating the

moon roof, operate the moon roof after

checking to make sure that there is no

possibility of any passenger having any

of their body parts caught in the moon

roof. Also, do not let a child operate

moon roof by the wireless remote con-

trol or mechanical key. It is possible for

children and other passengers to get

caught in the moon roof.

●When exiting the vehicle, turn the engine switch off, carry the key and exit

the vehicle along with the child. There may be accidental operation, due to

mischief, etc., that may possibly lead to an accident.

■Jam protection function

●Never use any part of your body to intentionally activate the jam protection

function.

●The jam protection function may not work if something gets caught just

before the moon roof is fully closed. Also, the jam protection function is not

designed to operate while the switch is being pressed. Take care so that

your fingers, etc. do not get caught.

Operation of each component -> Opening and closing the windows for Your Toyota Avalon 4 Door Fifth Generation (2019-2022)

Related Topics

Popular Owner Manuals

Latest Owner Manuals