Vehicle specifications for Your Toyota Avanza SUV Second Generation (2012-2021)

337  
Vehicle specifications  
9
9-1. Specifications  
Maintenance data  
(fuel, oil level, etc.)...........338  
Fuel information.................348  
9-2. Customization  
Customizable features.......349  
9-3. Initialization  
Items to initialize ................354  
 
338  
9-1. Specifications  
Maintenance data (fuel, oil level, etc.)  
Dimensions  
4190 mm (165.0 in.)  
Overall length  
4200 mm (165.4 in.)*1  
Overall width  
Overall height*2  
Wheelbase  
1660 mm (65.3 in.)  
1695 mm (66.7 in.)  
2655 mm (104.5 in.)  
1425 mm (56.1 in.)  
1435 mm (56.5 in.)  
Front  
Rear  
Tread  
1NR-VE  
engine  
1680 kg (3704 lb.)  
1700 kg (3748 lb.)  
Gross vehicle mass*3  
2NR-VE  
engine  
Front  
Rear  
750 kg (1653 lb.)  
1000 kg (2205 lb.)  
30 kg (66 lb.)  
Maximum permissible  
axle capacity*3  
Drawbar load*3  
Towing capacity*3  
750 kg (1653 lb.)  
Vehicles with an automatic trans-  
mission  
550 kg (1212 lb.)  
Vehicles with a manual transmis-  
sion  
Vehicle capacity weight*4  
(Occupants + luggage)  
560 kg (1234 lb.)*5  
605 kg (1334 lb.)*6  
*1: Vehicles with an aero bumper or a rear fog light  
*2: Unladen vehicles  
*3: Vehicles sold in South Africa  
*4: Vehicles sold in Mexico  
*5: Vehicles with second seats and third seats  
*6: Vehicles without second seats and third seats  
 
339  
9-1. Specifications  
Vehicle identification  
■ Vehicle identification number  
The vehicle identification number (VIN) is the legal identifier for  
your vehicle. This is the primary identification number for your Toy-  
ota. It is used in registering the ownership of your vehicle.  
This number is stamped in the  
engine compartment.  
Except for G.C.C. countries*1,  
Republics of Yemen, Jordan,  
Lebanon*2 Iraq, Cambodia,  
Laos and Philippines: This  
number is also stamped on the  
top right of the instrument  
panel.  
KBAV910102E  
For G.C.C. countries*1, Repub-  
lics of Yemen, Jordan, Leba-  
non*2 and Iraq: This number is  
also stamped on the top left of  
the instrument panel.  
9
KBAV910103E  
This number is also on the  
manufacturer’s plate.  
 
340  
9-1. Specifications  
For G.C.C. countries*1, Repub-  
lics of Yemen, Jordan, Leba-  
non*2 and Iraq: This number is  
also on the Certification Regu-  
lation plate.  
*1: Saudi Arabia, Sultanate of Oman, Bahrain, United Arab Emirates, Qatar,  
Kuwait  
*2: For vehicles with model code*3 that has “V” as the last letter  
*3: The model code is indicated on the manufacturer’s label or the Certifica-  
tion Regulation label.  
■ Year of manufacture and country of origin (G.C.C. countries*1,  
Republics of Yemen, Jordan, Lebanon*2 and Iraq)  
The year of the manufacture and country of origin are shown on the  
Certification Regulation plate.  
*1: Saudi Arabia, Sultanate of Oman, Bahrain, United Arab Emirates,  
Qatar, Kuwait  
*2: For vehicles with model code*3 that has “V” as the last letter  
*3: The model code is indicated on the manufacturer’s label or the Certifica-  
tion Regulation label.  
■ Engine number  
The engine number is stamped  
on the engine block as shown.  
 
341  
9-1. Specifications  
Engine  
Model  
Type  
1NR-VE and 2NR-VE  
4-cylinder in line, 4-cycle, gasoline  
1NR-VE engine  
72.5 × 80.5 mm (2.85 × 3.17 in.)  
2NR-VE engine  
Bore and stroke  
Displacement  
72.5 × 90.6 mm (2.85 × 3.57 in.)  
1NR-VE engine  
1329 cm3 (81.1 cu.in.)  
2NR-VE engine  
1496 cm3 (91.3 cu.in.)  
Automatic adjustment  
Automatic adjustment  
Valve clearance  
(engine cold)  
Drive belt tension  
2NR-VE engine  
Vehicles with an automatic transmission  
Maximum vehicle  
speed*1  
160 km/h (99 mph)  
Vehicles with a manual transmission  
165 km/h (102 mph)  
Maximum torque*1  
(NET)  
134 N·m (13.6 kgf·m, 98 ft·lbf) @4200 rpm  
Maximum output*1  
(NET)  
76 kW (101.9 HP) @6000 rpm  
*1: For vehicles with model code*2 that has “V” as the last letter  
*2: The model code is indicated on the manufacturer’s label or the Certifica-  
tion Regulation label. (→P. 339)  
9
Fuel  
Fuel type  
Unleaded gasoline only  
Research Octane  
Number  
90 (Octane rating 86) or higher  
Fuel tank capacity  
(Reference)  
45 L (11.9 gal., 9.9 Imp.gal.)  
 
342  
9-1. Specifications  
Lubrication system  
Oil capacity  
(Drain and refill  
⎯ reference*)  
With filter  
3.5 L (3.7 qt., 3.1 Imp.qt.)  
3.3 L (3.5 qt., 2.9 Imp.qt.)  
Without filter  
*: The engine oil capacity is a reference quantity to be used when changing  
the engine oil. Warm up and turn off the engine, wait more than 5 minutes,  
and check the oil level on the dipstick.  
■ Engine oil selection  
“Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use  
Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy  
the following grade and viscosity.  
Oil grade:  
0W-20, 5W-30 and 10W-30:  
API grade SL “Energy-Conserving”, SM “Energy-Conserving” or SN  
“Resource-Conserving”; or ILSAC multigrade engine oil  
Recommended viscosity (SAE):  
SAE 0W-20 is the best choice  
for good fuel economy and  
good starting in cold weather.  
If you use SAE 10W-30 or a  
higher viscosity engine oil in  
extremely low temperatures,  
the engine may become difficult  
Temperature range anticipated before  
next oil change.  
to start, so SAE 0W-20 or 5W-  
30 engine oil is recommended.  
Oil viscosity (0W-20 is explained here as an example):  
• The 0W in 0W-20 indicates the characteristic of the oil which  
allows cold startability. Oils with a lower value before the W allow  
for easier starting of the engine in cold weather.  
• The 20 in 0W-20 indicates the viscosity characteristic of the oil  
when the oil is at high temperature. An oil with a higher viscosity  
(one with a higher value) may be better suited if the vehicle is  
operated at high speeds, or under extreme load conditions.  
 
343  
9-1. Specifications  
How to read oil container labels:  
Either or both API registered marks are added to some oil contain-  
ers to help you select the oil you should use.  
1
API Service Symbol  
Top portion: “API SERVICE SN”  
means the oil quality designa-  
tion by American Petroleum  
Institute (API).  
Center portion: “SAE 0W-20”  
means the SAE viscosity grade.  
Lower portion: “Resource-Con-  
serving” means that the oil has  
fuel-saving and environmental  
protection capabilities.  
2
ILSAC Certification Mark  
The International Lubricant Specification Advisory Committee (ILSAC)  
Certification Mark is displayed on the front of the container.  
9
 
344  
9-1. Specifications  
Cooling system (including the reserve tank)  
Vehicles with an automatic transmission  
5.4 L (5.7 qt., 4.8 Imp.qt.)*1  
6.0 L (6.3 qt., 5.3 Imp.qt.)*2  
5.1 L (5.4 qt., 4.5 Imp.qt.)*3  
Vehicles with a manual transmission  
Capacity  
(Reference)  
5.5 L (5.8 qt., 4.8 Imp.qt.)*1  
6.1 L (6.4 qt., 5.4 Imp.qt.)*2  
5.2 L (5.5 qt., 4.6 Imp.qt.)*3  
Use either of the following:  
• “Toyota Super Long Life Coolant”  
• A similar high-quality ethylene glycol-based  
non-silicate, non-amine, non-nitrite, and non-  
borate coolant with long-life hybrid organic  
acid technology  
Coolant type  
Do not use plain water alone.  
*1: Except for G.C.C. countries*4, Republics of Yemen, Jordan, Lebanon*5,  
Iraq, Cambodia, Laos , Philippines and Malaysia  
*2: For G.C.C. countries*4, Republics of Yemen, Jordan, Lebanon*5 and Iraq  
*3: For Cambodia, Laos , Philippines and Malaysia  
*4: Saudi Arabia, Sultanate of Oman, Bahrain, United Arab Emirates, Qatar,  
Kuwait  
*5: For vehicles with model code*6 that has “V” as the last letter  
*6: The model code is indicated on the manufacturer’s label or the Certifica-  
tion Regulation label.  
Ignition system  
Spark plug  
Make  
Gap  
DENSO  
SC16HR11  
1.1 mm (0.043 in.)  
NOTICE  
■Iridium-tipped spark plugs  
Use only iridium-tipped spark plugs. Do not adjust the spark plug gap.  
 
345  
9-1. Specifications  
Electrical system  
Battery  
Specific gravity reading at  
20°C (68°F):  
1.250 ⎯ 1.290 Fully charged  
1.160 ⎯ 1.200 Half charged  
1.060 ⎯ 1.100 Discharged  
Charging rates  
Quick charge  
Slow charge  
15 A max.  
5 A max.  
Automatic transmission  
Fluid capacity*  
Fluid type  
4.9 L (5.2 qt., 4.3 Imp.qt.)  
Use either of the following:  
• Toyota Genuine ATF Type T-IV  
• DEXRON® III  
*: The fluid capacity is a reference quantity. If replacement is necessary, con-  
tact your Toyota dealer.  
Manual transmission  
Gear oil capacity  
1.1 L (1.2 qt., 1.0 Imp.qt.)  
(Reference)  
Gear oil type  
Gear oil API GL-4  
Recommended gear oil  
viscosity  
SAE 80W or SAE 75W-80  
Rear differential  
Oil capacity  
(Reference)  
3.7 L (3.9 qt., 3.3 Imp.qt.)  
9
Oil type  
Hypoid gear oil API GL-5  
SAE 90  
Oil viscosity  
 
346  
9-1. Specifications  
Clutch  
1NR-VE engine  
15 — 25 mm (0.6 — 1.0 in.)  
2NR-VE engine  
Pedal free play  
3 — 20 mm (0.1 — 0.8 in.)  
Fluid type (2NR-VE engine) SAE J1703 or FMVSS No. 116 DOT 3  
Brakes  
Pedal clearance*1  
Pedal free play  
111 mm (4.4 in.)  
0.5 — 2.0 mm (0.02 — 0.08 in.)  
Parking brake lever travel*2 4 — 7 clicks  
Fluid type SAE J1703 or FMVSS No.116 DOT 3  
*1: Minimum pedal clearance when depressed with a force of 294 N (30 kgf,  
66 lbf) while the engine is running  
*2: Parking brake lever travel when pulled up with a force of 196 N (20 kgf,  
44 lbf)  
Steering  
Free play  
Less than 30 mm (1.2 in.)  
Tires and wheels  
Tire size  
185/70R14 88S, 185/65R15 88S  
Front wheel  
Rear wheel  
Tire inflation pressure  
(Recommended cold  
tire inflation pressure)  
kPa (kgf/cm2 or bar, psi) kPa (kgf/cm2 or bar, psi)  
240 (2.4, 34)  
260 (2.6, 38)  
Wheel size  
14 × 5J, 15 × 5J  
Wheel nut torque  
103 N·m (10.5 kgf·m, 76 ft·lbf)  
 
347  
9-1. Specifications  
Light bulbs  
Light Bulbs  
Headlights (halogen bulb type)  
Front turn signal lights  
W
60/55  
21  
Type  
A
C
Front position lights  
5
B
Front fog lights (if equipped)  
19  
G
Side turn signal lights on the fender  
(if equipped)  
Exterior  
5
B
Rear turn signal lights  
Stop/tail lights  
21  
21/5  
5
F
E or B  
B
License plate lights  
Back-up lights  
16  
B
Front interior light/personal lights  
(if equipped)  
8
B
Interior  
Front interior light (if equipped)  
Rear interior light  
10  
8
D
D
A: H4 halogen bulbs  
B: Wedge base bulbs (clear)  
D: Double end bulbs  
C: Wedge base bulbs (amber)  
E: Single end bulbs (clear)  
G: H16 halogen bulbs  
F: Single end bulbs (amber)  
9
 
348  
9-1. Specifications  
Fuel information  
You must only use unleaded gasoline.  
Select unleaded gasoline with a Research Octane Number of 90  
(octane rating 86) or higher for optimum engine performance.  
■Use of ethanol blended gasoline in a gasoline engine  
Toyota allows the use of ethanol blended gasoline where the ethanol content  
is up to 10%. Make sure that the ethanol blended gasoline to be used has a  
Research Octane Number that follows the above.  
■If your engine knocks  
●Consult your Toyota dealer.  
●You may occasionally notice light knocking for a short time while accelerat-  
ing or driving uphill. This is normal and there is no need for concern.  
NOTICE  
■Notice on fuel quality  
●Do not use improper fuels. If improper fuels are used, the engine will be  
damaged.  
●Do not use gasoline with metallic additives, for example manganese, iron  
or lead, otherwise it may cause damage on your engine or emission con-  
trol system.  
●Do not add aftermarket fuel additives which contain metallic additives.  
●Do not use the methanol blended gasoline such as M15, M85, M100.  
The use of gasoline containing methanol may cause engine damage or  
failure.  
 
349  
9-2. Customization  
Customizable features  
Your vehicle includes a variety of electronic features that can be  
personalized to suit your preferences. Programming these pref-  
erences requires specialized equipment and may be performed  
by your Toyota dealer.  
Customizing vehicle features  
When customizing vehicle features, ensure that the vehicle is parked  
in a safe place with the shift lever in P (automatic transmission) or N  
(manual transmission) and the parking brake set.  
■ Changing by using the multi-information display  
→P. 74  
■ Changing by using the inside lock knob (Except for Malaysia)  
Alarm sound settings can be changed with the following proce-  
dures.  
1
Close and unlock all the doors.  
2
Turn the engine switch to the “LOCK” position and check that the  
alarm is disarmed.  
3
Open any of the doors.  
4
Turn on and off the emergency flashers 5 times quickly.  
5
Close the opened door.  
6
Turn the engine switch to the “ON” position.  
7
Operate the inside lock knob of the driver’s door as follows:  
Lock → Unlock → Lock → Unlock → Lock  
When the interior light is in the door position and the customization is  
completed, the interior light turns on for two seconds.  
9
Customized setting is changed in the following order each time the  
above procedures are done:  
OFF → Emergency flashers → Emergency flashers and sound  
 
350  
9-2. Customization  
■ Changing by using the wireless remote control (For vehicles  
sold in Malaysia)  
Operation signals of wireless remote control can be changed with  
the following procedures.  
1
Remove the key from the engine switch and check that the alarm  
is disarmed.  
2
Insert the key into the engine switch, then remove it twice within  
5 seconds.  
3
Push the lock switch once. Within the next 2 seconds, push the  
unlock switch once. The emergency flashers will flash once.  
4
Within 10 seconds, select the desired condition by pushing the  
lock switch according to the following table. Following that, within  
2 seconds, push the unlock switch once.  
Operation signal  
function  
Times lock switch  
is pushed  
Confirmation  
Determined by the number of  
emergency flasher flashes, as  
follows.  
Check current  
setting  
None  
Emergency flasher  
Once  
Twice  
Emergency flashers flash once.  
Emergency flashers flash twice.  
Emergency flasher  
and buzzer  
Emergency flashers flash three  
times.  
Off  
Three time  
Cancel (No-effect)  
Four or more times  
—
 
351  
9-2. Customization  
Customizable features  
Some function settings are changed simultaneously with other func-  
tions being customized. Contact your Toyota dealer for further details.  
1
Settings that can be changed using the multi-information display  
2
Settings that can be changed using the inside lock knob  
3
Settings that can be changed by your Toyota dealer for further  
details  
Definition of symbols: O = Available, — = Not available  
■ Wireless remote control*1 (→P. 86)  
Default Customized  
Function  
1
2
3
setting  
setting  
Operation signal  
(Emergency flashers)  
ON  
OFF  
—
—
O
OFF  
Operation signal*2  
Mode 2  
Mode 1  
Mode 3  
—
—
O
(Buzzer)  
*1: If equipped  
*2: For vehicles sold in Malaysia  
■ Illumination (→P. 199)  
Default  
setting  
Customized  
setting  
Function  
1
2
3
Time elapsed before the inte-  
rior lights turn off  
Long  
ON  
Short  
OFF  
—
—
—
O
O
Operation after the engine  
switch is turned to the “LOCK”  
position  
—
9
 
352  
9-2. Customization  
■ Turn signal light (emergency flasher) (→P. 144)  
Default  
setting  
Customized  
setting  
Function  
Buzzer operation  
1
2
3
ON  
OFF  
—
—
O
The number of times the turn  
signal lights flash automati-  
cally, when the turn signal  
lever is moved to the partial  
position.  
3
OFF  
—
—
—
—
O
O
The time until the flashing  
starts for the opposite direc-  
tion turn signal lights, when  
the turn signal lights are in the  
middle of flashing three times  
and the turn signal lever is  
moved to the partial position  
in the opposite direction.  
1.5 seconds  
1 second  
0.75  
seconds  
0.35  
seconds  
■ Alarm* (→P. 64)  
Default  
setting  
Customized  
setting  
Function  
1
2
3
OFF  
Emergency  
flashers and  
sound  
Alarm operation  
*: If equipped  
—
O
O
Emergency  
flashers  
■ Rear window wiper and washer* (→P. 152)  
Default  
setting  
Customized  
Function  
1
2
3
setting  
Fast  
Time of the intermittent opera-  
tion  
Normal  
—
—
O
Slow  
Operation of the intermittent  
position  
Intermittent  
after normal  
Intermittent  
OFF  
—
—
—
—
O
O
Rear window wiper operation  
linked with washer  
ON  
*: If equipped  
 
353  
9-2. Customization  
Customized  
■ Multi-information display (→P. 74)  
Default  
Function  
setting  
1
2
3
setting  
Eco Driving Indicator Light  
ON  
OFF  
O
—
—
WARNING  
■During customization  
As the engine needs to be running during customization, ensure that the  
vehicle is parked in a place with adequate ventilation. In a closed area such  
as a garage, exhaust gases including harmful carbon monoxide (CO) may  
collect and enter the vehicle. This may lead to death or a serious health  
hazard.  
NOTICE  
■During customization  
To prevent battery discharge, ensure that the engine is running while cus-  
tomizing features.  
9
 
354  
9-3. Initialization  
Items to initialize  
The following item must be initialized for normal system opera-  
tion after such cases as the battery is reconnected, or mainte-  
nance being performed on the vehicle.  
Item  
When to initialize  
Reference  
P. 114  
• After reconnecting or changing  
the battery  
• After changing a fuse  
• When functioning abnormally  
Power windows  
• When rotating front and rear  
tires which have different tire  
inflation pressures  
Tire pressure warn-  
ing system  
(if equipped)  
P. 262  
• When changing the tire size  
 

Related Topics

Specifications
Customization
Initialization

Popular Owner Manuals

Audi
BMW
Citroen
Ford
Honda
Peugeot

Latest Owner Manuals

First Generation (1995-2006) Ford Galaxy Van First Generation (1995-2006) Ford Galaxy Van
Second Generation (2013-2023) Ford Ecosport SUV Second Generation (2013-2023) Ford Ecosport SUV
Fifth Generation (2012-2020) Ford Explorer SUV Fifth Generation (2012-2020) Ford Explorer SUV
Third Generation (2016-2021) Ford Ka 2 Door Third Generation (2016-2021) Ford Ka 2 Door
Second Generation (2009-2016) Ford Ka 2 Door Second Generation (2009-2016) Ford Ka 2 Door
First Generation (1996-2008) Ford Ka 2 Door First Generation (1996-2008) Ford Ka 2 Door