Get Vehicle specifications -> Customization Guide for Toyota Avanza SUV Second Generation (2012-2021)

349

9-2. Customization

Customizable features

Your vehicle includes a variety of electronic features that can be

personalized to suit your preferences. Programming these pref-

erences requires specialized equipment and may be performed

by your Toyota dealer.

Customizing vehicle features

When customizing vehicle features, ensure that the vehicle is parked

in a safe place with the shift lever in P (automatic transmission) or N

(manual transmission) and the parking brake set.

■ Changing by using the multi-information display

→P. 74

■ Changing by using the inside lock knob (Except for Malaysia)

Alarm sound settings can be changed with the following proce-

dures.

1

Close and unlock all the doors.

2

Turn the engine switch to the “LOCK” position and check that the

alarm is disarmed.

3

Open any of the doors.

4

Turn on and off the emergency flashers 5 times quickly.

5

Close the opened door.

6

Turn the engine switch to the “ON” position.

7

Operate the inside lock knob of the driver’s door as follows:

Lock → Unlock → Lock → Unlock → Lock

When the interior light is in the door position and the customization is

completed, the interior light turns on for two seconds.

9

Customized setting is changed in the following order each time the

above procedures are done:

OFF → Emergency flashers → Emergency flashers and sound

350

9-2. Customization

■ Changing by using the wireless remote control (For vehicles

sold in Malaysia)

Operation signals of wireless remote control can be changed with

the following procedures.

1

Remove the key from the engine switch and check that the alarm

is disarmed.

2

Insert the key into the engine switch, then remove it twice within

5 seconds.

3

Push the lock switch once. Within the next 2 seconds, push the

unlock switch once. The emergency flashers will flash once.

4

Within 10 seconds, select the desired condition by pushing the

lock switch according to the following table. Following that, within

2 seconds, push the unlock switch once.

Operation signal

function

Times lock switch

is pushed

Confirmation

Determined by the number of

emergency flasher flashes, as

follows.

Check current

setting

None

Emergency flasher

Once

Twice

Emergency flashers flash once.

Emergency flashers flash twice.

Emergency flasher

and buzzer

Emergency flashers flash three

times.

Off

Three time

Cancel (No-effect)

Four or more times

—

351

9-2. Customization

Customizable features

Some function settings are changed simultaneously with other func-

tions being customized. Contact your Toyota dealer for further details.

1

Settings that can be changed using the multi-information display

2

Settings that can be changed using the inside lock knob

3

Settings that can be changed by your Toyota dealer for further

details

Definition of symbols: O = Available, — = Not available

■ Wireless remote control*¹(→P. 86)

Default Customized

Function

1

2

3

setting

Operation signal

(Emergency flashers)

ON

OFF

—

O

OFF

^{Operation signal}*²

Mode 2

Mode 1

Mode 3

—

O

(Buzzer)

*¹: If equipped

*²: For vehicles sold in Malaysia

■ Illumination (→P. 199)

Default

setting

Customized

setting

Function

1

2

3

Time elapsed before the inte-

rior lights turn off

Long

ON

Short

OFF

—

O

Operation after the engine

switch is turned to the “LOCK”

position

—

9

352

9-2. Customization

■ Turn signal light (emergency flasher) (→P. 144)

Default

setting

Customized

setting

Function

Buzzer operation

1

2

3

ON

OFF

—

O

The number of times the turn

signal lights flash automati-

cally, when the turn signal

lever is moved to the partial

position.

3

OFF

—

O

The time until the flashing

starts for the opposite direc-

tion turn signal lights, when

the turn signal lights are in the

middle of flashing three times

and the turn signal lever is

moved to the partial position

in the opposite direction.

1.5 seconds

1 second

0.75

seconds

0.35

seconds

■ Alarm* (→P. 64)

Default

setting

Customized

setting

Function

1

2

3

OFF

Emergency

flashers and

sound

Alarm operation

*: If equipped

—

O

Emergency

flashers

■ Rear window wiper and washer* (→P. 152)

Default

setting

Customized

Function

1

2

3

setting

Fast

Time of the intermittent opera-

tion

Normal

—

O

Slow

Operation of the intermittent

position

Intermittent

after normal

Intermittent

OFF

—

O

Rear window wiper operation

linked with washer

ON

*: If equipped

353

9-2. Customization

Customized

■ Multi-information display (→P. 74)

Default

Function

setting

1

2

3

setting

Eco Driving Indicator Light

ON

OFF

O

—

WARNING

■During customization

As the engine needs to be running during customization, ensure that the

vehicle is parked in a place with adequate ventilation. In a closed area such

as a garage, exhaust gases including harmful carbon monoxide (CO) may

collect and enter the vehicle. This may lead to death or a serious health

hazard.

NOTICE

■During customization

To prevent battery discharge, ensure that the engine is running while cus-

tomizing features.

9

Vehicle specifications -> Customization for Your Toyota Avanza SUV Second Generation (2012-2021)

Related Topics

Vehicle specifications

Popular Owner Manuals

Latest Owner Manuals