Get Instrument cluster Guide for Toyota Avanza SUV Third Generation (2022-2026)

85

Instrument cluster

2

2.

Instrument cluster

Warning lights and

indicators .......................... 86

Gauges and meters ............ 90

Multi-information

display............................... 94

Energy monitor/

consumption screen........ 100

86

2. Instrument cluster

Warning lights and indicators

The warning lights and indicators on the instrument cluster and

center panel inform the driver of the status of the vehicle’s vari-

ous systems.

For the purpose of explanation, the following illustration dis-

plays all warning lights and indicators illuminated.

87

2. Instrument cluster

Warning lights

Warning lights inform the driver of malfunctions in the indicated vehi-

cle’s systems.

1

Brake system warning

light (→P. 398)

Slip indicator (→P. 399)

1

Charging system warn-

ing light (→P. 398)

Brake system warning

light (→P. 401)

2

Malfunction

indicator

Open door warning light

(→P. 401)

lamp (→P. 398)

SRS warning light

(→P. 399)

Low fuel level warning

light (→P. 401)

ABS warning light

(→P. 399)

Seat belt reminder light

(→P. 401)

Electric power steering

system warning light

(→P. 399)

1

Master warning light

(→P. 401)

Low engine oil pressure

Tire pressure warning

warning light (→P. 398)

light (→P. 401)

LDA (Lane Departure

Alert with steering con-

trol) indicator

1, 2, 3

2, 4

PCS warning light

(→P. 400)

¹: These lights turn on when the power switch is turned to ON mode to indi-

cate that a system check is being performed. They will turn off after the

hybrid system is on, or after a few seconds. There may be a malfunction in

a system if a light does not come on, or turn off. Have the vehicle

inspected by your Toyota dealer.

²:

³: The light flashes to indicate a malfunction.

⁴: This light illuminates on the multi-information display.

88

Indicators

2. Instrument cluster

The indicators inform the driver of the operating state of the vehicle’s

various systems.

Turn signal indicator

EV drive mode indicator

(→P. 184)

(→P. 178)

Headlight indicator

Eco drive mode indicator

(→P. 186)

(→P. 259)

Headlight high beam

Sport mode indicator

indicator (→P. 186)

(→P. 259)

2

“READY” indicator

Automatic high beam

(→P. 172)

indicator (→P. 189)

1, 3

EV indicator (→P. 72)

Slip indicator (→P. 262)

4

1

Security indicator

VSC OFF indicator

(→P. 79, 81)

(→P. 263)

2, 5

1, 2, 6

Cruise control indicator

(→P. 246)

PCS warning light

(→P. 209)

LDA (Lane Departure

Alert with steering con-

trol) indicator

Dynamic radar cruise

control indicator

(→P. 233)

2, 5

(→P. 222)

5

1, 4

Cruise control “SET”

indicator (→P. 233, 246)

“AIR BAG ON/OFF” indi-

cator (→P. 48)

AIR BAG

89

2. Instrument cluster

¹: These lights turn on when the power switch is turned to ON mode to indi-

cate that a system check is being performed. They will turn off after the

hybrid system is on, or after a few seconds. There may be a malfunction in

a system if a light does not come on, or turn off. Have the vehicle

inspected by your Toyota dealer.

²:

³: The light flashes to indicate that the system is operating.

⁴: This light illuminates on the center panel.

⁵: This light illuminates on the multi-information display.

⁶: The light turns on when the system is off.

2

WARNING

■If a safety system warning light does not come on

Should a safety system light such as the ABS and SRS warning light not

come on when you start the hybrid system, this could mean that these sys-

tems are not available to help protect you in an accident, which could result

in death or serious injury. Have the vehicle inspected by your Toyota dealer

immediately if this occurs.

90

2. Instrument cluster

Gauges and meters

Hybrid System Indicator

1

Displays hybrid system output or regeneration level (→P. 92)

Multi-information display

2

Presents the driver with a variety of driving-related data (→P. 94)

Speedometer

3

Displays the vehicle speed

Fuel gauge

4

Displays the quantity of fuel remaining in the tank

Trip meter reset knob/instrument panel light control knob

5

→P. 91

Odometer and trip meter display

6

Odometer:

Displays the total distance the vehicle has been driven

Trip meter:

Displays the distance the vehicle has been driven since the meter was last

reset. Trip meters “A” and “B” can be used to record and display different

distances independently.

Shift position and shift range

7

Displays the selected shift position or selected shift range (→P. 180)

Engine coolant temperature gauge

8

Displays the engine coolant temperature

91

2. Instrument cluster

Changing the trip meter display

Switches between trip meter “A”

and “B” displays. When the trip

meter is displayed, pressing and

holding the knob will reset the trip

meter.

2

Instrument panel light control

The brightness of the instrument panel lights can be adjusted.

Darker

1

Brighter

2

92

2. Instrument cluster

■The meters and display illuminate when

The power switch is in ON mode.

■The brightness of the instrument panel lights

●When the headlight switch is turned to on, the brightness will be reduced

slightly unless the control knob is turned fully clockwise.

●When the knob is turned fully clockwise, the display audio/navigation sys-

tem screen will always be in day mode regardless of the headlight switch

position.

■Hybrid System Indicator

1

Charge area

Shows regenerative charging.

2

Hybrid Eco area

Shows that gasoline engine power is

not being used very often.

The gasoline engine will automatically

stop and restart under various condi-

tions.

3

Eco area

Shows that the vehicle is being driven in

an Eco-friendly manner.

4

Power area

Shows that an Eco-friendly driving

range is being exceeded (during full

power driving etc.)

●Hybrid System Indicator is displayed when the driving mode is other than

the sport mode.

●By keeping the indicator needle within Eco area, more Eco-friendly driving

can be achieved.

^{●Charge area indicates regeneration} status. Regenerated energy will be

used to charge the battery.

: When used in this manual, “regeneration” refers to the conversion of

energy created by the movement of the vehicle into electrical energy.

■Engine speed

On hybrid vehicles, engine speed is precisely controlled in order to help

improve fuel efficiency and reduce exhaust emissions etc.

There are times when the engine speed that is displayed may differ even

when vehicle operation and driving conditions are the same.

93

2. Instrument cluster

■Customization

The instrument panel light auto dimmer control can be changed.

(Customizable feature: →P. 461)

NOTICE

■To prevent damage to the engine and its components

●When indicating the tachometer (Using the S mode driving): Do not let the

indicator of the tachometer enter the red zone, which indicates the maxi-

mum engine speed. (→P. 181)

●The engine may be overheating if the engine coolant temperature gauge is

in the red zone (H). In this case, immediately stop the vehicle in a safe

place, and check the engine after it has cooled completely. (→P. 429)

2

94

2. Instrument cluster

Multi-information display

Display contents

The multi-information display presents the driver with a variety of driv-

ing-related data.

● Trip information (→P. 95)

Displays the following items:

• Distance to empty

• Average fuel economy

• Current fuel economy

• Turn-by-turn

navigation

(vehicles with a navigation

system)

● Settings (→P. 96)

● Energy Flow (→P. 100)

● Warning messages and reminder messages (→P. 407)

● Automatically displayed when a malfunction occurs in one of the

vehicle’s systems or when a reminder message is required. The

display returns to the previous screen by pressing the “DISP” but-

ton. (→P. 95)

● Cruise control display () (→P. 246)

● Dynamic radar cruise control display () (→P. 233)

● LDA (Lane Departure Alert with steering control) display (if

equipped) (→P. 222)

● PCS (Pre-Collision System) display () (→P. 209)

● Tachometer (→P. 181)

● Tire pressure warning system display (→P. 357)

95

2. Instrument cluster

Trip information

■ Switching the display

Items

displayed

can

be

switched by pressing the

“DISP” button.

2

■ Distance to empty

Displays the estimated maximum distance that can be driven with

the quantity of fuel remaining.

• This distance is computed based on your average fuel consumption. As

a result, the actual distance that can be driven may differ from that dis-

played.

• When only a small amount of fuel is added to the tank, the display may

not be updated.

When refueling, turn the power switch off. If the vehicle is refueled with-

out turning the power switch off, the display may not be updated.

■ Digital speedometer

Displays the current vehicle speed.

■ Average fuel economy

Displays the average fuel consumption since the function was

reset.

• The function can be reset by pressing and holding the “DISP” button

when the average fuel consumption is displayed.

• Use the displayed average fuel consumption as a reference.

■ Current fuel economy

Displays the current rate of fuel consumption.

■ Sway warning ()

Detects the sway of the vehicle within a lane, which is often associ-

ated with a decrease in the driver’s attention level, and displays the

decrease in attention using a segment display.

The fewer segments lit, the more the driver may need to rest.

This display is a part of the LDA (Lane Departure Alert with steering

control) system. The display is enabled when the operating conditions

of the vehicle sway warning are met. (→P. 222)

96

2. Instrument cluster

■ Turn-by-turn navigation (vehicles with a navigation system)

Displays information from the navigation system about the next turn

on the guidance route.

Setting up the displays

◆ Customizable items

■ Meter settings

Item

Settings

ON

Details

Select to enable/disable the digital

speedometer.

Digital Speed

OFF

English

Metric

ON

Units (vehicles without a

navigation system)

Select to change the units of mea-

sure displayed.

Turn-by-Turn

(vehicles

Select to enable/disable the Turn-

by-turn navigation.

with a navigation system)

OFF

Select to enable/disable the EV

indicator.

EV Indicator

ON

■

LDA (Lane Departure Alert with steering control) (if

equipped) (→P. 222)

The following LDA system settings can be changed:

Item

Settings

ON

Details

Select to enable/disable steering

wheel assistance.

Steering Assist

OFF

Standard

High

Select to set the warning sensitiv-

ity.

Sensitivity

Alert

ON

Select to enable/disable the vehi-

cle sway warning.

OFF

Standard

Low

Select to set the vehicle sway

warning sensitivity.

Sensitivity

High

97

2. Instrument cluster

◆ Changing the settings

1

While the vehicle is stopped,

press the “DISP” button until

the

“Settings”

screen

appears.

2

3

4

Press and hold the “DISP”

button while the “Settings”

screen is displayed.

Press the “DISP” button to

highlight the desired item.

Press and hold the “DISP”

button to change the setting.

98

2. Instrument cluster

5

To exit the “Settings” screen,

press the “DISP” button

repeatedly until “EXIT” is

highlighted and then press

and hold the “DISP” button.

If the Lane Departure settings

screen is displayed, press the

“DISP” button repeatedly until

“RETURN” is highlighted, then

press and hold the “DISP”

switch to return to the “Settings”

screen.

The display goes back to step

1

.

■System check display

After turning the power switch to ON mode, “SYSTEM CHECK” is displayed

while system operation is checked.

■Trip summary display

When the hybrid system is turned off,

drive information data since the hybrid

system was started is displayed for 3 sec-

onds.

99

2. Instrument cluster

■Setting display automatic cancelation

In the following situations, setting display in which the settings can be

changed through the “DISP” button will automatically be turned off.

●When a warning message appears while the setting display is displayed

●When the vehicle begins to move while the setting display is displayed

■Tire inflation pressure

●It may take a few minutes to display the tire inflation pressure after the

power switch is turned to ON mode. It may also take a few minutes to

display the tire inflation pressure after inflation pressure has been

adjusted

2

●“---” may be displayed if the tire information cannot be determined due to

unfavorable radio wave conditions.

●Tire inflation pressure changes with temperature. The displayed values

may also be different from the values measured using a tire pressure

gauge.

■Liquid crystal display

Small spots or light spots may appear on the display. This phenomenon is

characteristic of liquid crystal displays, and there is no problem continuing to

use the display.

WARNING

■The information display at low temperatures

Allow the interior of the vehicle to warm up before using the liquid crystal

information display. At extremely low temperatures, the information display

monitor may respond slowly, and display changes may be delayed.

For example, there is a lag between the driver’s shifting and the new gear

number appearing on the display. This lag could cause the driver to down-

shift again, causing rapid and excessive engine braking and possibly an

accident resulting in death or injury.

■Cautions during setting up the display

As the hybrid system needs to be operating during setting up the display,

ensure that the vehicle is parked in a place with adequate ventilation. In a

closed area such as a garage, exhaust gases including harmful carbon

monoxide (CO) may collect and enter the vehicle. This may lead to death or

a serious health hazard.

NOTICE

■During setting up the display

To prevent 12-volt battery discharge, ensure that the hybrid system is oper-

ating while setting up the display features.

100

2. Instrument cluster

Energy monitor/consumption screen

You can view the status of your hybrid system on the multi-infor-

mation display and the audio system.

Audio system

1

Multi-information display

2

Energy monitor

■ Audio system

1

Press “APPS”.

2

Select “Eco”.

If the “Trip Information” or “Past Record” screen is displayed, touch

“Energy”.

101

2. Instrument cluster

■ Multi-information display

Press the “DISP” button on the

steering wheel several times to

select the energy monitor dis-

play.

2

Multi-information

display

Audio system

When the vehicle is

powered by the

electric motor (trac-

tion motor)

When the vehicle is

powered by the

gasoline engine

When the vehicle is

powered by both

the gasoline engine

and the electric

motor

(traction

motor)

When the vehicle is

charging the hybrid

battery (traction bat-

tery)

102

2. Instrument cluster

Multi-information

display

Audio system

When there is no

energy flow

Hybrid battery (trac-

tion battery) status

Full

Low

Full

103

2. Instrument cluster

Trip Information

■ Audio system

1

Press “APPS”. (→P. 100)

2

Select “Eco”.

If “Energy Monitor” screen is displayed, touch “Fuel Consumption”.

If “Past Record” screen is displayed, touch “Trip Information”.

Fuel consumption in the

1

past 15 minutes

2

Displays the average vehi-

2

cle speed since the hybrid

system was started.

Displays the elapsed time

3

since the hybrid system

was started.

Cruising range

4

Regenerated energy in the past 15 minutes

5

One symbol indicates 50 Wh. Up to 5 symbols are shown.

The image is example only, and may vary slightly from actual condi-

tions.

104

2. Instrument cluster

Past record screen

■ Audio system

1

Press “APPS”. (→P. 100)

2

Select “Eco”.

If “Energy Monitor” screen is displayed, touch “Fuel Consumption”.

If “Trip Information” screen is displayed, touch “Past Record”.

Best past fuel consump-

1

tion

Update

2

The average fuel consump-

tion and graph are updated,

and a new average fuel con-

sumption record begins.

Average fuel consumption

3

Displays a maximum of five

past record of the average

fuel consumption.

Previous fuel consumption record

4

The image is example only, and may vary slightly from actual condi-

tions.

■Resetting the consumption data

Selecting “Clear” on the “Trip Information” screen will reset the fuel consump-

tion and the regenerated energy for the past 15 minutes. Selecting “Clear” on

the “Past Record” screen will reset the past records and best past fuel con-

sumption. Selecting “Yes” on the following screen will confirm resetting of all

the data.

■Customization

The touch button sensitivity can be changed.

(Customizable features →P. 461)

Instrument cluster for Your Toyota Avanza SUV Third Generation (2022-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals