Instrument cluster -> Gauges and meters for Your Toyota Avanza SUV Third Generation (2022-2026)

90  
2. Instrument cluster  
Gauges and meters  
Hybrid System Indicator  
1
Displays hybrid system output or regeneration level (P. 92)  
Multi-information display  
2
Presents the driver with a variety of driving-related data (P. 94)  
Speedometer  
3
Displays the vehicle speed  
Fuel gauge  
4
Displays the quantity of fuel remaining in the tank  
Trip meter reset knob/instrument panel light control knob  
5
P. 91  
Odometer and trip meter display  
6
Odometer:  
Displays the total distance the vehicle has been driven  
Trip meter:  
Displays the distance the vehicle has been driven since the meter was last  
reset. Trip meters “A” and “B” can be used to record and display different  
distances independently.  
Shift position and shift range  
7
Displays the selected shift position or selected shift range (P. 180)  
Engine coolant temperature gauge  
8
Displays the engine coolant temperature  
91  
2. Instrument cluster  
Changing the trip meter display  
Switches between trip meter “A”  
and “B” displays. When the trip  
meter is displayed, pressing and  
holding the knob will reset the trip  
meter.  
2
Instrument panel light control  
The brightness of the instrument panel lights can be adjusted.  
Darker  
1
Brighter  
2
92  
2. Instrument cluster  
The meters and display illuminate when  
The power switch is in ON mode.  
The brightness of the instrument panel lights  
When the headlight switch is turned to on, the brightness will be reduced  
slightly unless the control knob is turned fully clockwise.  
When the knob is turned fully clockwise, the display audio/navigation sys-  
tem screen will always be in day mode regardless of the headlight switch  
position.  
Hybrid System Indicator  
1
Charge area  
Shows regenerative charging.  
2
Hybrid Eco area  
Shows that gasoline engine power is  
not being used very often.  
The gasoline engine will automatically  
stop and restart under various condi-  
tions.  
3
Eco area  
Shows that the vehicle is being driven in  
an Eco-friendly manner.  
4
Power area  
Shows that an Eco-friendly driving  
range is being exceeded (during full  
power driving etc.)  
Hybrid System Indicator is displayed when the driving mode is other than  
the sport mode.  
By keeping the indicator needle within Eco area, more Eco-friendly driving  
can be achieved.  
Charge area indicates regeneration status. Regenerated energy will be  
used to charge the battery.  
: When used in this manual, “regeneration” refers to the conversion of  
energy created by the movement of the vehicle into electrical energy.  
Engine speed  
On hybrid vehicles, engine speed is precisely controlled in order to help  
improve fuel efficiency and reduce exhaust emissions etc.  
There are times when the engine speed that is displayed may differ even  
when vehicle operation and driving conditions are the same.  
93  
2. Instrument cluster  
Customization  
The instrument panel light auto dimmer control can be changed.  
(Customizable feature: P. 461)  
NOTICE  
To prevent damage to the engine and its components  
When indicating the tachometer (Using the S mode driving): Do not let the  
indicator of the tachometer enter the red zone, which indicates the maxi-  
mum engine speed. (P. 181)  
The engine may be overheating if the engine coolant temperature gauge is  
in the red zone (H). In this case, immediately stop the vehicle in a safe  
place, and check the engine after it has cooled completely. (P. 429)  
2