Get SUSPENSION AND AXLE -> Front Shock Absorber Guide for Toyota Avensis 4 Door First Generation (1997-2003)

SA–13

SUSPENSION AND AXLE

–

FRONT SHOCK ABSORBER

SA10J–06

COMPONENTS

Cap

z 47 (475, 34)

80(820, 59)

Suspension Support

Dust Seal

Spring Upper Seat

Upper Insulator

Coil Spring

Shock Absorber

with Coil Spring

Spring Bumper

Lower Insulator

ABS Speed Sensor

Wire Harness

5.5(55,48in.·lbf)

255(2,600,188)

29(300, 22)

Shock Absorber

Flexible Hose

: Specified torque

N·m (kgf·cm, ft·lbf)

z Non–reusable part

F12735

AVENSIS/CORONA SUP (RM781E)

SA–14

SUSPENSION AND AXLE

–

FRONT SHOCK ABSORBER

SA10K–03

REMOVAL

1.

REMOVE FRONT WHEEL

Torque: 103 N·m (1,050 kgf·cm, 76 ft·lbf)

2.

DISCONNECT ABS SPEED SENSOR WIRE HARNESS

CLAMPS FROM SHOCK ABSORBER

Remove the bolt and disconnect the ABS speed sensor wire

harness clamps.

Torque: 5.5 N·m (55 kgf·cm, 48 in.·lbf)

3.

DISCONNECT FLEXIBLE HOSE

Remove the bolt and disconnect the flexible hose from the

shock absorber bracket.

Torque: 29 N·m (300 kgf·cm, 22 ft·lbf)

4.

REMOVE SHOCK ABSORBER WITH COIL SPRING

(a) Loosen the 2 nuts on the lower side of shock absorber.

Torque: 255 N·m (2,600 kgf·cm, 188 ft·lbf)

HINT:

Do not remove the 2 bolts.

(b) Remove the 3 nuts.

Torque: 80 N·m (820 kgf·cm, 59 ft·lbf)

(c) Remove the 2 nuts and bolts on the lower side of shock

absorber.

HINT:

At the time of installation, coat the nut’s thread with engine oil.

(d) Remove the shock absorber with coil spring.

F12736

AVENSIS/CORONA SUP (RM781E)

SA–15

SUSPENSION AND AXLE

–

FRONT SHOCK ABSORBER

SA10P–05

INSTALLATION

Installation is in the reverse order of removal (See page SA–14).

HINT:

After installation, check the front wheel alignment (See Pub. No. RM599E on page SA–4).

AVENSIS/CORONA SUP (RM781E)

SUSPENSION AND AXLE -> Front Shock Absorber for Your Toyota Avensis 4 Door First Generation (1997-2003)

Related Topics

SUSPENSION AND AXLE

Popular Owner Manuals

Latest Owner Manuals