Keys and doors for Your Toyota Avensis 4 Door Second Generation (2004-2009)

Machine Translated by Google  
KEYS AND DOORS  
13  
Chapter 1–2  
OPERATION OF INSTRUMENTS AND CONTROLS  
ELEMENTS  
Keys and doors  
• Keys. .  
. . . .  
.
. . . . . . . .  
.
. . . . . . . . . . . . . . .  
. . . . . . . . . . . . .  
. . . . . . . . . . .  
.
.
.
.
.
.
.
.
.
.
.
. . . . . . . .  
. . . . . . . .  
. . . . . . . .  
. . . . . . . .  
. . . . . . . .  
. . . . . . . .  
. . . . . . . .  
. . . . . . . .  
. . . . . . . .  
. . . . . . . .  
. . . . . . . .  
.
.
.
.
.
.
.
.
.
.
.
. 14  
. 18  
. 22  
. 34  
. 38  
. 43  
. 45  
. 49  
. 50  
. 53  
. 56  
• Engine immobilizer system. •  
Wireless remote control.  
• Side door.  
. . . . . . . .  
.
. . . . . . . . . . . . . . .  
. . . . . . . . . . . . .  
• Electrically operated windows. .  
• Trunk lid. .  
.
. . . . . . . .  
. . . . . . . .  
. . . . . . . .  
.
.
.
. . . . . . . . . . . . . . .  
. . . . . . . . . . . . . . .  
. . . . . . . . . . . . . . .  
. . . . . . . . . . . . . . .  
. . . . . . . . . . . . . . .  
. . . . . . . . . . . . . . .  
• Rear door.  
• Bonnet. . •  
. .  
.
Security system. • Fuel tank cap.  
• Electric sunroof.  
.
Machine Translated by Google  
KEYS AND DOORS  
14  
Keys (without engine  
immobilizer system)  
KEY NUMBER LABEL  
Two types of keys are supplied with your vehicle.  
Your key number is on the label. Keep the tag in a  
safe place, such as your wallet, not in your vehicle.  
1. Master keys ÿ These keys work in all locks.  
2. Auxiliary key ÿ This key cannot be used to unlock  
the trunk and glove box  
In the event of loss, or if you need to have additional  
keys made, any authorized Toyota dealer or service  
center, or other properly qualified and equipped  
professional, can make duplicates according to the  
relevant key number.  
To protect items locked in the trunk and glove box  
when parking with an attendant, leave the auxiliary key  
with the attendant.  
We recommend that you write down the key number  
and store it in a safe place.  
As all side doors can be locked without a key, you  
should always carry a spare master key with you in case  
you accidentally lock your keys inside the vehicle.  
Machine Translated by Google  
KEYS AND DOORS  
15  
Keys (with engine immobilizer  
system)  
Two types of keys are supplied with your vehicle.  
NOTICE  
If you use keys with a transponder chip, follow  
these instructions:  
1. Master keys ÿ These keys work in all locks. Your  
authorized Toyota dealer or workshop, or other  
properly qualified and equipped professional, will  
need one of these keys to make a new key with an  
embedded transponder chip.  
u When starting the engine, do not leave the ring  
resting on the key head and do not press it  
against the key head. Otherwise, the engine may  
not start or may stall soon after starting.  
2. Auxiliary key ÿ This key cannot be used to unlock  
the trunk and glove box  
Both the master and auxiliary keys have a transponder  
chip for the engine immobilizer system located in the  
key head. These chips ensure the correct operation of  
the system, so be careful not to lose these keys. If you  
make your own duplicate key, it will not be possible to  
disarm the system or start the engine.  
To protect items locked in the trunk and glove box  
when parking with an attendant, leave the auxiliary key  
with the attendant.  
As all side doors can be locked without a key, you  
should always carry a spare master key with you in case  
you accidentally lock your keys inside the vehicle.  
Machine Translated by Google  
KEYS AND DOORS  
16  
u When starting the engine, do not use  
the key near other keys with a  
u Do not bend the key head.  
transponder (including keys from  
another vehicle) and do not press the  
metal parts of another key against the  
head of your key. Otherwise, the engine  
may not start or stop soon after starting.  
If this happens, remove the key, separate  
other transponder keys (including keys  
from another vehicle) from the ring, or  
grasp or cover them with your hand.  
Then put the key back into the ignition  
switch and start the engine.  
Machine Translated by Google  
KEYS AND DOORS  
17  
u Do not cover the head of the key with any  
material that could interrupt the passage of  
electromagnetic waves. u Do  
not tap the key strongly against other pre-  
mint.  
u Do not expose the key to high temperatures for a  
long time, such as placing the key on the  
dashboard or hood where the sun shines directly.  
u Do not soak the key in water or clean it with  
ultrasound.  
u Do not use the wrench with electromagnetic  
materials.  
KEY NUMBER LABEL  
Your key number is on the tag. Keep the  
tag in a safe place, such as your wallet, not  
in your vehicle.  
In the event of loss, or if you need to have additional  
keys made, any authorized Toyota dealer or service  
center, or other properly qualified and equipped  
professional, can make duplicates according to the  
relevant key number.  
We recommend that you write down the key  
number and store it in a safe place.  
Machine Translated by Google  
KEYS AND DOORS  
18  
Engine immobilizer system  
Without front passenger seat belt light  
The engine immobilizer system is a system that  
prevents the vehicle from being stolen. When the  
key is inserted into the ignition switch, a transponder  
chip, located in the key head, transmits an electronic  
code to the vehicle. The engine will only start when  
the electronic code in the chip matches the registered  
ID code of the vehicle.  
With front passenger seat belt indicator  
The system is automatically set when the key is removed  
from the ignition switch. The indicator will start flashing to  
indicate that the system is set.  
If any of the following indicator conditions occur, contact  
any authorized Toyota dealer or service center, or  
another properly qualified and equipped professional.  
• The indicator remains on, except when the  
security system is being set or activated.  
(See "Security System" on page 50 in this  
chapter)  
• The indicator does not start flashing when the key is removed  
from the ignition switch.  
Machine Translated by Google  
KEYS AND DOORS  
19  
• The indicator flashes irregularly.  
Inserting the registered key into the ignition switch will  
automatically disable the system, allowing the engine to  
start. The indicator goes out.  
In order to make a new key with a built-in transponder chip,  
your authorized Toyota dealer or service center, or another  
properly qualified and equipped professional, will need the  
key number and the master key. However, you can only  
have a limited number of additional key pieces made.  
If you make your own duplicate key, it will not be  
possible to turn off the system or  
start the engine.  
NOTICE  
Do not modify, disassemble or disassemble the engine  
immobilizer system. If any unauthorized changes or  
modifications are made, the correct operation of the  
system cannot be guaranteed.  
Machine Translated by Google  
KEYS AND DOORS  
20  
Machine Translated by Google  
KEYS AND DOORS  
21  
Machine Translated by Google  
22  
KEYS AND DOORS  
Wireless Remote Control –  
You can use up to 4 wireless remote control keys for  
one vehicle. Any authorized Toyota dealer or service  
center, or another properly qualified and equipped  
specialist, will provide you with more detailed information.  
When the door cannot be operated with the wireless  
remote control key, the control does not work from a  
normal distance, or the indicator on the key goes out or  
does not light up at all:  
• Check the proximity of a radio transmitter, such as a  
radio station or airport, which may interfere with  
the normal function of the key.  
• The battery may be dead. Check the battery in the  
key. To replace the battery – see "– Battery  
replacement" on page 25 in this chapter.  
1. "LOCK" switch  
2. "UNLOCK" switch  
3. Indicator  
If you lose your wireless remote control key, contact  
any authorized Toyota dealer or service center, or  
another properly qualified and equipped professional,  
as soon as possible to avoid theft of the vehicle or  
other accident. (See "When you lose your keys" on  
page 344 in Chapter 4.)  
4. Trunk lid/tailgate unlock switch  
The wireless remote control system is designed to  
lock or unlock all side doors and rear doors from a  
distance of approximately 1m from the vehicle.  
When operating any button on the key, press  
them slowly and thoroughly. At that point, the  
indicator on the key will flash once.  
The wireless remote control key is an electronic  
component. Follow the instructions below to avoid  
damaging the key.  
• Do not leave the key in places where the temperature  
may be high, such as the dashboard.  
• Do not disassemble it.  
• Do not knock the key hard against other objects or  
drop it on the ground.  
• Do not immerse the key in water.  
Machine Translated by Google  
KEYS AND DOORS  
23  
– Locking and unlocking the doors  
When you lock the doors with the wireless remote  
control, none of the doors can be unlocked by the  
central door locking switch. The function of the central  
door locking switch can be restored by unlocking with  
the wireless remote control key. (See "Side doors" on  
page 34 in this chapter.)  
For vehicles with a security system and a double locking  
system, these systems can be set and canceled using  
the "LOCK" and "UNLOCK" switches. (See "Security  
system" on page 50 and "ÿ Double locking system" on  
page 37 in this chapter.)  
Locking  
Lock: Press the "LOCK" switch. All side doors and trunk  
lid/tailgate lock simultaneously. At that moment, the turn  
signals will flash once.  
Visually check that the side doors and trunk lid/tailgate  
are securely locked.  
If any of the side doors or trunk lid/rear door are not  
securely closed, or if the key is in the ignition switch,  
locking with the "LOCK" switch cannot be performed.  
Unlock: Press the "UNLOCK" switch.  
All side doors and trunk lid/rear door unlock  
simultaneously. At that moment, the turn signals will  
Unlocking  
flash twice.  
To lock and unlock all side doors and the trunk/  
tailgate, press the key switches slowly and firmly.  
If the luggage protection system is set, the trunk lid  
cannot be unlocked by wireless remote control. See "ÿ  
Baggage protection system" on page 44 in this chapter.  
When all the side doors and trunk lid/  
rear door unlocked at the same time with the wireless  
remote key, the ignition switch light and front interior  
light will come on for about 15 seconds and then turn  
off smoothly even though the doors have not been  
opened. (For more information - see "Front interior  
lighting and personal lamps" on page 142 and "Ignition  
switch lighting" on page 144 in Chapters 1-5.)  
Machine Translated by Google  
KEYS AND DOORS  
24  
– Unlocking the trunk lid/tailgate  
After using the wireless remote control unlock function,  
you have 30 seconds to open the side doors or the  
trunk/tailgate lid. If the side doors or trunk lid/tailgate are  
not opened by then, all side doors and trunk lid/tailgate  
will automatically lock again.  
If the "LOCK" or "UNLOCK" switch is held down, locking  
or unlocking the door will not be repeated. Release the  
switch and press it again.  
To unlock only the trunk/tailgate, press the trunk/  
tailgate unlock switch on the key.  
If the key is in the ignition switch, unlocking cannot be  
done with the trunk/tailgate unlock switch.  
After using the wireless remote control unlock function,  
you have 30 seconds to open the trunk lid/tailgate. If the  
trunk lid/tailgate is not opened by then, the trunk lid/  
tailgate will automatically lock again.  
If the wireless remote control does not work, you can  
open the trunk lid with the master key. See "Trunk lid" on  
page 43 in this chapter.  
Machine Translated by Google  
KEYS AND DOORS  
25  
– Battery replacement  
Use a CR2016 lithium battery or equivalent and a special  
screwdriver for replacement.  
WARNING  
Pay special attention to prevent small  
children from swallowing the removed  
battery or parts.  
NOTICE  
u Be careful not to lose any parts when  
changing the batteries.  
1. Remove the screw and open the cover.  
u For replacement, use only the same or  
equivalent type recommended by an  
authorized Toyota dealer or service  
center, or another properly qualified  
and equipped professional.  
u Dispose of batteries in accordance  
with applicable regulations.  
To replace the battery, proceed as follows:  
Machine Translated by Google  
KEYS AND DOORS  
26  
2. Remove the module from the housing.  
3. Remove the battery case cover.  
Machine Translated by Google  
KEYS AND DOORS  
27  
5. Insert the new battery with the positive side facing  
4. Move the battery so that it is free and can be removed.  
up, making sure the battery is firmly attached by the  
clips.  
NOTICE  
NOTICE  
Do not modify the battery case. It could cause a  
problem.  
u Make sure the positive and negative sides of the  
battery are oriented correctly.  
u Do not replace the battery with wet hands.  
Water can cause unexpected corrosion.  
u Do not touch or move any part inside the  
transmitter to avoid malfunction.  
u Take care not to bend the electrode when  
inserting the battery and to prevent grease or  
dust from entering the case.  
6. Replace the battery case cover and insert  
module into the key body.  
7. Close the cover and secure it with a screw.  
NOTICE  
Make sure the cover is securely closed.  
Machine Translated by Google  
KEYS AND DOORS  
28  
After replacing the battery, test whether the key works  
properly. When you press any switch on the wireless  
dongle, make sure the indicator on the dongle lights up.  
If the key still does not work properly, contact any  
authorized Toyota dealer or service center, or another  
properly qualified and equipped professional.  
Machine Translated by Google  
KEYS AND DOORS  
29  
Machine Translated by Google  
KEYS AND DOORS  
30  
Machine Translated by Google  
KEYS AND DOORS  
31  
Machine Translated by Google  
KEYS AND DOORS  
32  
Machine Translated by Google  
KEYS AND DOORS  
33  
Machine Translated by Google  
KEYS AND DOORS  
34  
Side door –  
Vehicles with security system ÿ When the security system  
is set, an alarm sounds when the door is unlocked with  
the key. (Instructions - see "Security System" on page  
50 in this chapter.)  
When the luggage protection system is set, the trunk lid  
cannot be unlocked with the driver's door. See "ÿ  
Baggage protection system" on page 44 in this chapter.  
LOCKING AND UNLOCKING WITH A KEY  
Insert the key into the lock and turn it.  
Lock: Turn the key forward.  
Unlock: Turn the key backwards.  
Except when the ignition switch is in the "ON" position –  
Without dual locking system: All side doors and trunk lid/  
tailgate lock and unlock at the same time as the driver's  
door.  
With double locking system: All side doors and trunk lid/  
rear door lock simultaneously with the driver's door.  
If the driver's door is open, all doors cannot be locked  
simultaneously with the key.  
When all the side doors and trunk lid/  
rear doors unlocked at the same time with either the key  
(vehicles without dual locking system) or wireless remote  
control, the ignition switch light and front interior light will  
come on and stay on for approximately 15 seconds  
before going off smoothly.  
(For more information, see "Front interior lighting and  
personal lamps" on page 142 and "Ignition switch lighting"  
on page 144 in Chapters 1-5.)  
Machine Translated by Google  
KEYS AND DOORS  
35  
LOCKING AND UNLOCKING FROM THE INTERNAL  
SWITCH LOCKING AND UNLOCKING  
CENTRAL DOOR LOCKING  
LOCK BUTTON  
Move the lock button.  
Press the switch.  
Lock: Push the button forward.  
Unlock: Pull the button back.  
Lock: Press the switch on the front.  
Unlock: Press the switch on the back.  
Vehicles with dual locking system ÿ When  
the dual locking system is set, the doors  
cannot be unlocked by either of the outer or  
inner door handles. (See "ÿ Double locking  
system" on page 37 in this chapter.)  
All side doors and trunk lid/tailgate will lock or unlock at  
the same time.  
If you perform the following operations with the ignition  
switch in the "ACC" or "LOCK" position, or with the key  
removed, none of the side doors or the trunk lid/tailgate  
can be unlocked using the central door locking switch.  
The driver's door can be opened from the inside  
even if the interior locking button is in the locked  
position.  
To lock the door from the outside ÿ  
• Lock all side doors and trunk lid/tailgate  
with the wireless remote control key.  
Rear door ÿ Set the button to the locked position and  
close the door.  
• Without dual locking system: Set the driver's  
door interior locking button to the locked  
position and close the driver's door.  
Front passenger door ÿ Set the button to the  
locked position and close the door while  
keeping the outside handle raised.  
• Lock all side doors and trunk lid/rear door  
at the same time as the driver's door.  
Driver's door ÿ  
With double locking system: The interior  
locking button cannot be set to the locked  
position when the driver's door is open. Lock  
the driver's door from the outside with the key  
or wireless remote control.  
Without a double locking system: Set the  
button to the locked position and close the door.  
Be careful not to lock the keys inside the vehicle.  
Machine Translated by Google  
KEYS AND DOORS  
36  
The function of the central door locking switch  
can be restored in the following ways:  
• Turn the ignition key to the "ON" position. • Unlock  
all side doors and trunk lid/rear door at the same time as  
the driver's door.  
• Unlock all side doors and trunk lid/tailgate with the  
wireless remote control key.  
• Unlock the driver's door with the interior locking  
button, then unlock all side doors with the central  
door locking switch.  
REAR SIDE CHILD PROTECTIONS  
THE DOOR  
If the luggage protection system is set, the  
trunk lid cannot be unlocked with the central  
door locking switch on the driver's door.  
See "ÿ Baggage protection system" on page  
44 in this chapter.  
Move the lever to the "LOCK" position as  
indicated on the label.  
When the child lock is locked, the rear side door cannot  
be opened by the inside door handle. We recommend  
that you always use this method when small children  
are in the vehicle.  
WARNING  
• Make sure the doors are closed before driving.  
• When there are small children in the rear seats  
of the vehicle, you should use the child lock  
system to prevent the door from opening  
unexpectedly from the inside while driving.  
• If the doors are left unlocked while driving, they  
can easily be opened from the outside in the  
event of an accident.  
Machine Translated by Google  
KEYS AND DOORS  
37  
- Double locking system  
4. Within 5 seconds, press the "LOCK" switch on the  
wireless remote key TWICE.  
For vehicles with a security system –  
At that point, the security system will also be set up.  
(See "Security System" on page 50 in this chapter.)  
The system cannot be set unless a wireless remote  
control key is used.  
The turn signals will flash once each time the "LOCK"  
switch is pressed.  
The double locking system is a system that prevents  
theft of the vehicle. Vehicles with a dual locking  
system have decals on the front side windows to  
indicate that the vehicle is equipped with this system.  
The system is set when you lock all side doors with  
the wireless remote control. Once the double locking  
system is set, neither side door can be unlocked  
from the inside or outside.  
CANCELLATION OF THE SYSTEM  
Press the "UNLOCK" switch on the wireless remote  
control key.  
The turn signals will flash twice to indicate that  
the system has been disarmed.  
If the battery in the wireless remote control key is dead,  
you can open the driver's door with the key. However,  
the security system remains activated, so the alarm  
sounds. (See "Security System" on page 50 in this  
chapter.)  
WARNING  
Never activate the double locking system when  
there are people inside the vehicle, as none of the  
SYSTEM TEST (vehicles without safety system)  
side doors will be able to be opened from the  
inside. If you accidentally lock the door, press the  
1. Open all windows.  
"UNLOCK" switch on the wireless remote control  
key.  
2. Turn the ignition key to the "LOCK" position and  
remove it.  
3. Let all passengers get out of the car  
eat.  
SYSTEM SETUP  
4. Open and close the driver's door. Make sure all side  
doors and rear doors are securely closed.  
1. Turn the ignition key to the "LOCK" position and  
remove it.  
2. Let all passengers get out of the car  
eat.  
5. Within 5 seconds, press the "LOCK" switch on the  
wireless remote key TWICE.  
3. Open and close the driver's door. Make sure all side  
doors and trunk lid/  
6. Try to unlock all the side ones  
door from inside.  
the back door is securely closed.  
The internal locking button should return to the locked  
position.  
Machine Translated by Google  
KEYS AND DOORS  
38  
Electric windows  
The windows can be operated by a switch on each  
7. Press the "UNLOCK" switch on the wireless remote  
control key and check if the system is disarmed.  
side door.  
The ignition key must be in the "ON" position.  
If the system is not working properly, have it checked by  
any authorized Toyota dealer or service center, or  
another properly qualified and equipped specialist.  
Operation with the ignition off: If both front doors are  
closed, the windows can be operated for 43 seconds  
even after the ignition switch is turned off. The control  
stops working immediately after opening any of the front  
doors.  
SYSTEM TEST (vehicles with security system)  
Anti-entrapment function: If an obstacle gets between  
the window and its frame during automatic closing or  
when closing with the ignition off, the window stops and  
opens halfway.  
1. Open all windows.  
2. Turn the ignition key to the "LOCK" position and  
remove it.  
This function can be triggered by a strong impact on the  
window without catching any object.  
3. Let all passengers get out of the car  
eat.  
4. Press the intrusion sensor override switch.  
If the automatic window control does not work or  
the anti-entrapment function does not work properly,  
you should normalize the window by using the  
appropriate power window control switch.  
The security indicator flashes rapidly. Complete  
step 5 within 5 minutes.  
5. Close all side doors and trunk lid/  
rear door, then press the "LOCK" switch TWICE on  
the wireless remote control key within 5 seconds.  
Power window normalization:  
1. When moving the window up or down, disconnect the  
battery. Then connect it.  
This will set up the double locking system and the  
security system without activating the intrusion  
sensor function. (For details - see "Security System"  
on page 50 in this chapter.)  
2. Pull the window control switch up until the window  
closes and hold the switch for 2 seconds.  
Make sure the window opens and closes automatically.  
If the power window does not work properly, have it  
checked by any authorized Toyota dealer or workshop,  
or another properly qualified and equipped professional.  
6. Try to unlock all the side ones  
door from inside.  
The internal locking button should return to the  
locked position.  
7. Press the "UNLOCK" switch on the wireless remote  
control key and check if the system is disarmed.  
If the system is not working properly, have it checked by  
any authorized Toyota dealer or service center, or  
another properly qualified and equipped specialist.  
Machine Translated by Google  
KEYS AND DOORS  
39  
WARNING  
• Never try to catch any part of your body to  
intentionally trigger the Anti-Entrapment  
function, as this may cause death or serious  
injury.  
• The anti-catch function may not be triggered if  
something is caught just before the window is  
fully closed.  
DRIVER'S WINDOW CONTROLS  
Use the switch on the driver's door.  
Normal control: The window moves as long  
as you hold the switch down.  
Open: Press the switch down lightly.  
Close: Pull the switch up slightly.  
Machine Translated by Google  
KEYS AND DOORS  
40  
Window lock switch  
With rear power windows  
Automatic operation: Press the switch all the way  
down or pull it all the way up and then release it. The  
window opens or closes completely. To stop the window  
in the intermediate position, push or pull the switch  
lightly and then release it.  
Window lock switch  
Without rear power windows  
PASSENGER WINDOW CONTROLS  
Use the switch on each passenger door or  
the switches on the driver's door that  
operate the passenger windows.  
Normal control: The window moves as long  
as you hold the switch down.  
Open: Press the switch down lightly.  
Close: Pull the switch up slightly.  
Pressing the window lock switch on the driver's door  
will disable the passenger windows.  
The indicators on the switches indicate which of  
the switches can be controlled.  
Machine Translated by Google  
KEYS AND DOORS  
41  
With rear power windows  
Without rear power windows  
With rear power windows  
Machine Translated by Google  
42  
KEYS AND DOORS  
WARNING  
Follow the instructions below to prevent death or  
serious injury.  
• Before closing the electrically operated  
windows, always make sure that no one is in  
the vicinity of the windows. You must also  
make sure that the heads, hands and other  
body parts of all persons being transported  
are completely inside the vehicle. Death or  
serious injury could result if the neck, head or  
hands of a person being transported become  
caught in the closing window. When anyone  
closes the power windows, make sure they do  
it safely.  
• When small children are in the vehicle,  
never allow them to use the window  
switches without supervision. Use the  
window lockout switch to prevent  
them from using the switches unexpectedly.  
• When leaving the vehicle, make sure  
to remove the ignition key.  
• Never leave anyone (especially small  
children) alone in the vehicle,  
especially if the ignition key is still in  
the ignition. They can thus use the  
power window switches and be trapped  
by the window. Unsupervised persons  
(especially small children) can thus be  
involved in serious accidents.  
Without rear power windows  
Automatic operation: Press the switch all the way  
down or pull it all the way up and then release it. The  
window opens or closes completely. To stop the window  
in the intermediate position, push or pull the switch  
lightly and then release it.  
Machine Translated by Google  
KEYS AND DOORS  
43  
Trunk lid (sedan) –  
To open the trunk lid from the outside, press the  
trunk lid opener and lift it up.  
Use the internal handles to make it easier to grip the  
trunk lid when closing it.  
The trunk lid can be opened when the vehicle is stationary.  
To close the trunk lid, fold the lid down and press on it.  
After closing the trunk lid, try pulling the lid up to make  
sure it is securely closed.  
The trunk lid can be locked or unlocked in the following  
ways.  
When closing the trunk lid, make sure it is securely closed.  
• By operating the central door locking switch.  
(See "Side doors" on page 34 in this  
chapter.)  
Instructions for loading luggage - see "Instructions for  
storing luggage" on page 297 in chapter 2.  
• By controlling the wireless remote control. (See "ÿ  
Unlocking the trunk lid/tailgate" on page 24 in this  
chapter.)  
WARNING  
• By operating the driver's door lock with the key.  
(See "Side doors" on page 34 in this chapter.)  
Keep the trunk lid closed while driving.  
This will not only prevent luggage from falling out  
of the vehicle, but also prevent exhaust gases from  
entering the vehicle.  
If the battery pole extension is disconnected and  
connected, the trunk lid will be automatically locked. Be  
careful not to lock the keys in the vehicle.  
For baggage loading instructions - see "Baggage stowage  
instructions" on page 297 in Chapter 2.  
Machine Translated by Google  
KEYS AND DOORS  
44  
- Baggage protection system  
If the trunk lid opener or wireless remote control  
This system deactivates the central locking and  
wireless remote control systems so that items  
locked in the trunk can be protected.  
does not work, you can open the trunk lid with the  
master key.  
To open the trunk lid, insert the master key into the lock  
and turn it clockwise.  
1. Vehicles with folding rear seat only ÿ Slide the  
safety lock levers to lock the rear seatbacks.  
After locking the rear seatbacks, try to fold them down  
to make sure they are securely locked, otherwise  
anyone could get into the trunk after folding the rear  
seats.  
Machine Translated by Google  
KEYS AND DOORS  
45  
The back door  
(liftback and station wagon) –  
2. After closing the trunk lid, insert the master key  
To open the rear door from the outside, press the  
rear door opener and lift the door.  
into the lock and turn it counter-clockwise to  
deactivate central locking and wireless remote  
control.  
The rear doors can be opened when the vehicle is  
stationary.  
After closing the trunk lid, try pulling the lid up to make  
sure it is securely locked.  
The rear door can be locked or unlocked in the following  
ways.  
• By operating the central door locking switch.  
(See "Side doors" on page 34 in this  
chapter.)  
• By controlling the wireless remote control. (See "ÿ  
Unlocking the trunk lid/tailgate" on page 24 in this  
chapter.)  
• By operating the driver's door lock with the key.  
(See "Side doors" on page 34 in this chapter.)  
If the battery terminal is disconnected and connected, the  
rear door will be automatically locked. Be careful not to  
lock the keys in the vehicle.  
Instructions for loading luggage - see "Instructions for  
storing luggage" on page 297 in chapter 2.  
Machine Translated by Google  
KEYS AND DOORS  
46  
WARNING  
Keep the back door closed while driving.  
This will not only prevent luggage from falling out  
of the vehicle, but also prevent exhaust gases from  
entering the vehicle.  
NOTICE  
To avoid damage to the tailgate dampers, do not  
apply any force to them, paint them or leave any  
foreign substances on them.  
Liftback  
Kombi  
Use the internal handles to make it easier to grip the  
rear door when closing it.  
To close the rear door, fold the door down and push it.  
After closing the tailgate, try pulling the door up to make  
sure it is securely closed.  
When closing the back door, make sure it is securely  
closed.  
Instructions for loading luggage - see "Instructions for  
storing luggage" on page 297 in chapter 2.  
Machine Translated by Google  
KEYS AND DOORS  
47  
ÿ If the opener does not work  
(liftback)  
Left-hand drive vehicles  
If the rear door opener does not work, you can  
open the rear door from the inside.  
To open the rear door from the inside, do the  
following.  
1. Remove the cover using a flat screw-  
vacuum.  
Right-hand drive vehicles  
2. Left-hand drive vehicles ÿ Push  
lever to the right.  
Right-hand drive vehicles ÿ Insert a flat screwdriver  
or similar object into the hole in the cover and  
push the lever to the right.  
If the rear door opener does not work, do not have  
the vehicle checked/repaired by any authorized  
Toyota dealer or service center, or another properly  
qualified and equipped professional.  
Machine Translated by Google  
KEYS AND DOORS  
48  
ÿ If the opener does not work  
(combi)  
Left-hand drive vehicles  
If the rear door opener does not work, you can  
open the rear door from the inside.  
To open the rear door from the inside, do the  
following.  
1. Remove the cover using a flat screw-  
vacuum.  
Right-hand drive vehicles  
2. Left-hand drive vehicles ÿ Push  
lever to the right.  
Right-hand drive vehicles ÿ Insert a flat screwdriver  
or similar object into the hole in the cover and  
push the lever to the right.  
If the rear door opener does not work, do not have  
the vehicle checked/repaired by any authorized  
Toyota dealer or service center, or another properly  
qualified and equipped professional.  
Machine Translated by Google  
KEYS AND DOORS  
49  
Hood  
Opening the hood:  
2. At the front of the vehicle, pull up on the  
latch lever and raise the hood.  
1. Pull the hood lock release lever. The  
hood pops up slightly.  
WARNING  
Make sure the hood is closed and securely  
locked before driving. Otherwise, it could  
open unexpectedly while driving and an  
accident could occur.  
Machine Translated by Google  
KEYS AND DOORS  
50  
Security system  
3. Secure the hood in the open position by inserting  
the support rod into the hole.  
To prevent vehicle theft, this system is designed to  
sound an alarm if any side door, trunk lid/tailgate,  
or hood is forcibly unlocked or opened, or the  
battery terminals are disconnected and then  
reconnected, or the cable is cut sirens or when  
someone breaks into the vehicle while the vehicle is  
locked.  
Before closing the hood, visually check that you have  
not forgotten any tools, rags, etc. in the engine  
compartment, and return the support rod to the holder -  
this will prevent rattling. Then lower the hood and make  
sure it is locked.  
If necessary, press down gently on its front edge to lock  
it in place.  
The alarm will sound the horn and siren intermittently,  
and the turn signals and front interior lighting will flash.  
WARNING  
After inserting the support bar into the hole, make  
sure that the bar sufficiently secures the hood  
against falling on your head or body.  
Machine Translated by Google  
KEYS AND DOORS  
51  
INTRUSION SENSOR CANCEL SWITCH  
SYSTEM SETUP  
The intrusion sensor can be disabled to prevent  
unwanted alarms from being triggered in the following  
circumstances:  
1. Turn the ignition key to the "LOCK" position and  
remove it.  
When the key is removed from the ignition switch, the  
indicator will flash. (Details - see "Engine Immobilizer  
System" on page 18 of this chapter.)  
• A child or household member is left in the vehicle  
animal.  
• Some window or skylight is left open.  
2. Let all passengers get out of the car  
eat.  
• When parking in a noisy area or on a rooftop  
parking lot. • The  
3. Close and lock all side doors, trunk lid/tailgate and  
hood with the wireless remote control.  
vehicle's bodywork or windows are hit by a strong  
impact from the outside (for example, during  
a high-pressure vehicle  
If all side doors, trunk lid/tailgate and hood are closed  
and locked, the warning light will remain on.  
wash). • When the vehicle is transported on a car  
transport chassis.  
The system will automatically reset after 30 seconds.  
Canceling the intrusion sensor  
When the system is set, the indicator will start flashing  
again.  
1. Press the switch on the overhead console.  
The indicator on the instrument panel will flash rapidly  
for 5 minutes.  
4. After making sure that the indicator has started  
flashing, you can leave the vehicle.  
2. When the indicator is flashing, set the security  
system.  
The intrusion sensor is disabled while the system  
remains secure.  
Machine Translated by Google  
KEYS AND DOORS  
52  
If the alarm has been activated and the key is not in the  
WARNING  
ignition switch, all side doors and the trunk lid/tailgate  
will automatically lock again.  
Never activate the double locking system while  
there are people inside the vehicle, as none of the  
After 28 seconds, the alarm will stop automatically and  
the indicator will start flashing again.  
doors will be able to be opened from inside the  
vehicle. If you accidentally lock the door, press the  
"UNLOCK" button on the wireless remote control  
key.  
Alarm reactivation  
Once the system is set, the system will automatically  
set the alarm again after the alarm stops.  
Canceling the system  
The alarm is activated again under the same  
conditions described in "Activating the system".  
The system will cancel within 30 seconds before the  
system auto-sets under any of the following conditions:  
Stop the alarm  
Unlock any side door or trunk lid/tailgate with the wireless  
remote control key.  
• Any side door, trunk lid/tailgate or hood is open.  
• Any side door or trunk lid/  
If the battery is discharged due to long-term non-use of  
the vehicle, etc., when the battery is recharged or  
replaced, the system will trigger an alarm. If this happens,  
the back door is unlocked.  
• The key is inserted into the ignition.  
• The battery terminals are reconnected.  
immediately unlock any side door or trunk lid/tailgate  
with the wireless remote control key and the alarm will  
stop.  
WHEN THE SYSTEM IS SET UP  
System activation  
SYSTEM TEST  
The system sounds an alarm under the following  
conditions:  
1. Open all windows.  
2. Cancel the intrusion sensor using the procedure above.  
• If any side door is unlocked or opened without  
a wireless remote control key, or if the trunk  
lid/tailgate or hood is forced open.  
3. Set up the system as described above. The side doors  
and trunk lid/tailgate should be locked with a wireless  
remote control key. Wait until the indicator turns off  
or starts flashing.  
• If the battery terminals are disconnected and  
then reconnected.  
4. Unlock any side door from the inside.  
The system should activate an alarm.  
• If the ignition is shorted.  
• Someone or something is moving inside the vehicle  
5. Stop the alarm as described above.  
when the intrusion sensor function is on.  
6. Repeat this operation for other doors and hood.  
When testing the hood, also check that the system  
is activated when the battery terminal block is  
disconnected and then reconnected.  
When the system is activated, the indicator lights up.  
Machine Translated by Google  
KEYS AND DOORS  
53  
Fuel tank cap –  
If the system is not working properly, have it checked by  
any authorized Toyota dealer or workshop, or another  
properly qualified and equipped professional.  
INTRUSION SENSOR FUNCTION TEST  
1. Open all windows.  
2. Set up the system as described above. The side doors  
and trunk lid/tailgate should be locked with a wireless  
remote control key. Wait until the indicator turns off  
or starts flashing.  
This symbol indicates that the fuel tank door is  
located on the left side of your vehicle.  
3. Insert your hand through the open window, move it  
near the driver's seat and remove your hand. The  
system should activate an alarm.  
4. Stop the alarm as described above.  
If the system is not working properly, have it checked by  
any authorized Toyota dealer or workshop, or another  
properly qualified and equipped professional.  
Machine Translated by Google  
KEYS AND DOORS  
54  
1. Press the switch to open the fuel tank door.  
Turn off the engine when refueling.  
WARNING  
2. Remove the cap by turning it slowly  
counterclockwise and wait a moment before  
removing it. After removing, hang the cap in the  
holder.  
It is not unusual to hear a faint hissing sound when  
opening the cap. Close the tank by inserting and turning  
the cap clockwise until you hear a click.  
• When pumping fuel, do not smoke,  
avoid sparks and do not handle open  
flames. Vapors are flammable.  
• When opening the cap, do not remove  
it quickly. Fuel can be under pressure  
in hot weather and if the cap is  
WARNING  
removed quickly, it can spray out of  
the filler neck and cause injury.  
• Make sure the cap is securely  
tightened to prevent fuel leakage in  
the event of an accident.  
• Due to the pressure regulation in the  
fuel tank that these caps provide,  
Toyota recommends using a genuine  
Toyota cap when replacing. Another  
cap of the same quality can also be used.  
Machine Translated by Google  
KEYS AND DOORS  
55  
– In case the opener does not work  
Then  
Pull the manual lever in the trunk/  
luggage compartment.  
This procedure is used when the fuel tank  
door cannot be opened due to a dead  
battery or other problems.  
Liftback  
Kombi  
Machine Translated by Google  
KEYS AND DOORS  
56  
Electric sunroof  
Auto Scroll ÿ  
Open: Press the switch on the "SLIDE OPEN" side.  
The sunroof automatically opens completely.  
To stop the window in an intermediate position, briefly  
press the switch on the "SLIDE OPEN" or "TILT UP" side.  
The sunshade will be opened together with the sunroof.  
Close: Press the switch on the "TILT UP" side.  
The sunroof automatically closes completely.  
To stop the window in an intermediate position, briefly  
press the switch on the "SLIDE OPEN" or "TILT UP" side.  
Scrolling  
Manual scrolling ÿ  
To partially open the sunroof, quickly press and release  
the switch on the "SLIDE OPEN" side.  
To close the sunroof, quickly press and release the switch  
on the "TILT UP" side.  
Automatic tipping ÿ  
Tilt: Press the switch on the "TILT UP" side.  
The sunroof automatically folds up completely.  
To stop the window in an intermediate position, briefly  
press the switch on the "SLIDE OPEN" or "TILT UP" side.  
Dumping  
Use the switches next to the front interior lighting  
and personal lamps to operate the sunroof.  
Fold: Press the switch on the "SLIDE OPEN" side.  
The sunroof automatically folds down completely.  
To stop the window in an intermediate position, briefly  
press the switch on the "SLIDE OPEN" or "TILT UP" side.  
The key must be in the "ON" position.  
The sun visor can be opened or closed manually.  
Machine Translated by Google  
KEYS AND DOORS  
57  
Manual tipping ÿ  
If the sunroof does not operate automatically or the  
anti-entrapment function does not work properly,  
you should normalize the sunroof.  
To partially tilt the sunroof, quickly press and release the  
switch on the "TILT UP" side.  
Skylight normalization:  
To partially lower the sunroof, quickly press and release  
the switch on the "SLIDE OPEN" side.  
1. Press and hold the sunroof switch on the "TILT UP"  
side until the sunroof stops. Then release the switch.  
Ignition Off Operation: The sunroof operates for  
approximately 43 seconds even after the ignition switch  
is turned off. It will stop working if any of the front doors  
are open.  
2. After 10 seconds, press and hold the switch on the  
"TILT UP" side until the sunroof fully tilts up and then  
automatically tilts down slightly.  
Anti-Entrapment Features:  
3. Release the switch and then, within 5 seconds, press  
and hold the switch on the "TILT UP" side again until  
the following operations are performed.  
• If something gets caught between the sunroof  
and the frame during slide closing, the  
sunroof will stop and open halfway.  
• If something gets caught between the sunroof  
and the frame during folding, the sunroof will  
stop and fully unfold.  
• Folding •  
Opening by sliding  
• Close by scrolling  
If there is a sharp impact on the sunroof, this function  
can be activated even if nothing is caught in the sunroof.  
When these operations are performed, the  
normalization is complete.  
Make sure the sunroof opens and closes automatically.  
If the sunroof does not function properly, have it checked  
by any authorized Toyota dealer or service center, or  
another properly qualified and equipped professional.  
Machine Translated by Google  
KEYS AND DOORS  
58  
WARNING  
To prevent death or serious injury, follow these  
instructions. • While driving, make sure that the  
head,  
hands and other parts of the body of all persons  
are out of the roof opening. Failure to do so  
could result in death or serious injury in the  
event of a sudden vehicle stop or accident.  
• Before closing the sunroof, always make sure  
that no one is near the sunroof. Also make sure  
no one has their head, hands or other body parts  
in the roof opening.  
If a person's neck, head or hands become  
caught in the closing sunroof, it can cause  
death or serious injury. If someone closes  
the sunroof, they should first make sure that  
it is safe to do so.  
• When leaving the vehicle, make sure to remove  
the ignition key.  
• Never leave anyone (especially small children)  
alone in the vehicle, especially if the ignition  
key is still in the ignition. They can thus use the  
sunroof switches and be caught in the sunroof  
opening. Unsupervised persons (especially small  
children) can thus be involved in serious  
accidents. • Never sit on the roof near the roof  
opening.  
• Never try to catch any part of your body to  
intentionally trigger the anti-entrapment function,  
as this may cause death or serious injury.  
• The anti-entrapment function may not work if  
something is caught just before the sunroof is  
fully closed.  

Related Topics

Keys (without engine immobilizer system)
Keys (with engine immobilizer system)
Engine immobilizer system
Wireless Remote Control
Locking and unlocking the doors
Unlocking the trunk lid/tailgate
Battery replacement
Declarations of Conformity
Side door
Locking and unlocking from internal lock button
Central door locking
Rear side child protections
Double locking system
Electric windows
Trunk lid (sedan)
Baggage protection system
The back door (liftback and station wagon)
Hood
Security system
Fuel tank cap
Electric sunroof

Popular Owner Manuals

Audi
BMW
Citroen
Ford
Honda
Peugeot

Latest Owner Manuals

Fifth Generation (2020-2025) Toyota Supra 2 Door Fifth Generation (2020-2025) Toyota Supra 2 Door
Twelfth Generation (2018-2026) Toyota Corolla 4 Door Twelfth Generation (2018-2026) Toyota Corolla 4 Door
Eleventh generation (2013-2017) Toyota Corolla 4 Door Eleventh generation (2013-2017) Toyota Corolla 4 Door
Ninth Generation (2007-2012) Toyota Corolla 4 Door Ninth Generation (2007-2012) Toyota Corolla 4 Door
Fourth Generation (2021-2026) Toyota Yaris 4 Door Fourth Generation (2021-2026) Toyota Yaris 4 Door
Third Generation (2011-2020) Toyota Yaris 4 Door Third Generation (2011-2020) Toyota Yaris 4 Door