When driving -> Instrument cluster for Your Toyota Aygo SUV First Generation (2005-2014)

2-2. Instrument cluster  
Gauges and meters  
2
Tachometer (if equipped)  
Displays the engine speed in revolutions per minute.  
Speedometer  
Displays the vehicle speed.  
Fuel gauge  
Displays the quantity of fuel remaining in the tank.  
Odometer and trip meter  
Odometer: Displays the total distance the vehicle has been driven.  
Trip meter: Displays the distance the vehicle has been driven since the  
meter was last reset.  
Odometer/trip meter display change button  
P. 140  
139  
 
2-2. Instrument cluster  
Changing the display  
Switches between odometer and  
trip meter displays. When the trip  
meter is displayed, pressing and  
holding the button will reset the  
trip meter.  
The meters and display operate when  
The engine switch is in the “ON” position.  
NOTICE  
To prevent damage to the engine and its components  
Vehicles with a tachometer: Do not let the indicator needle of the tachome-  
ter enter the red zone, which indicates the maximum engine speed.  
The engine may be overheating if the high engine coolant temperature  
warning light flashes or turns on. In this case, immediately stop the vehicle  
in a safe place, and check the engine after it has cooled completely.  
(P. 336)  
140  
 
2-2. Instrument cluster  
Indicators and warning lights  
The indicators and warning lights on the instrument cluster and cen-  
ter panel inform the driver of the status of the vehicle’s various sys-  
tems.  
For the purpose of explanation, the following illustration displays all  
indicators and warning lights illuminated.  
Instrument cluster  
2
141  
 
2-2. Instrument cluster  
Indicators  
The indicators inform the driver of the operating state of the  
vehicle’s various systems.  
Turn signal indicator  
Rear fog light indicator  
(P. 136)  
(P. 148)  
Shift position and gear  
position indicators  
(P. 129)  
Headlight low beam  
indicator (P. 144)  
(Vehicles with a multi-mode manual transmission)  
1,2  
*
Headlight high beam  
indicator (P. 144)  
Slip indicator  
(P. 154)  
(If equipped)  
Front fog light indicator  
(P. 149)  
(If equipped)  
*1: These lights turn on when the engine switch is turned to the “ON”  
position to indicate that a system check is being performed. They  
will turn off after the engine is started, or after a few seconds. There  
may be a malfunction in a system if a light does not come on, or if  
the lights do not turn off. Have the vehicle inspected by any autho-  
rized Toyota dealer or repairer, or another duly qualified and  
equipped professional.  
*2: The light flashes to indicate that the system is operating.  
142  
 
2-2. Instrument cluster  
Warning lights  
Warning lights inform the driver of malfunctions in any of the  
vehicle’s systems. (P. 312)  
1
1
1
1
1
1
1
1
1,2  
1
*
*
*
*
*
*
*
*
(Flashes) (If equipped)  
(Flashes)  
1
*
*
*
2
(If equipped) (If equipped)  
*1: These lights turn on when the engine switch is turned to the “ON”  
position to indicate that a system check is being performed. They  
will turn off after the engine is started, or after a few seconds. There  
may be a malfunction in a system if a light does not come on, or if  
the lights do not turn off. Have the vehicle inspected by any autho-  
rized Toyota dealer or repairer, or another duly qualified and  
equipped professional.  
*2: The light comes on when the airbag manual on-off switch turned to  
the “OFF” position.  
CAUTION  
If a safety system warning light does not come on  
Should a safety system light such as the ABS and SRS warning light not  
come on when you start the engine, this could mean that these systems are  
not available to help protect you in an accident, which could result in death  
or serious injury. Have the vehicle inspected by any authorized Toyota dealer  
or repairer, or another duly qualified and equipped professional immediately  
if this occurs.  
143