Get Maintenance and care -> AC filter / Key battery Guide for Toyota Aygo SUV Second Generation (2015-2021)

380

7-3. Do-it-yourself maintenance

Air conditioning filter

The air conditioning filter must be changed regularly to maintain

air conditioning efficiency.

Removal method

Vehicles without a smart entry & start system:

Turn the engine switch to the “LOCK” position.

Vehicles with a smart entry & start system:

Turn the engine switch off.

Pull out the air conditioning filter

as shown in the illustration.

Replace it with a new one.

■Changing interval

Inspect and replace the air conditioning filter according to the maintenance

schedule. In dusty areas or areas with heavy traffic flow, early replacement

may be required. (For scheduled maintenance information, please refer to the

“Toyota Service Booklet” or “Toyota Warranty Booklet”.)

■If air flow from the vents decreases dramatically

The filter may be clogged. Check the filter and replace if necessary.

NOTICE

■When using the air conditioning system

Make sure that a filter is always installed.

Using the air conditioning system without a filter may cause damage to the

system.

381

7-3. Do-it-yourself maintenance

Wireless remote control/electronic key

battery

Replace the battery with a new one if it is depleted.

You will need the following items:

● Flathead screwdriver

● Small flathead screwdriver

● Lithium battery CR2016 (vehicles without a smart entry & start sys-

tem), or CR2032 (vehicles with a smart entry & start system)

Replacing the battery

 Vehicles without a smart entry & start system

Lift the cover.

Insert the flathead screwdriver in

the slot and push down.

To prevent damage to the key,

cover the tip of the flathead screw-

driver with a rag.

7

Remove the cover.

Insert the flathead screwdriver in

the bottom of key and push down.

382

7-3. Do-it-yourself maintenance

Remove the depleted battery.

Insert a new battery with the “+”

terminal facing up.

 Vehicles with a smart entry & start system

Remove the cover.

To prevent damage to the key,

cover the tip of the flathead screw-

driver with a tape.

Remove the battery cover.

Knob

Pull the knob of the battery cover

to remove.

Remove the depleted battery.

Insert a new battery with the “+”

terminal facing up.

383

7-3. Do-it-yourself maintenance

■Use a CR2016 (vehicles without a smart entry & start system), or CR2032

(vehicles with a smart entry & start system) lithium battery

●Batteries can be purchased at any authorized Toyota retailer or Toyota

authorized repairer, or any reliable repairer, local electrical appliance shops

or camera stores.

●Replace only with the same or equivalent type recommended by the manu-

facturer.

●Dispose of used batteries according to the local laws.

■If the key battery is depleted

The following symptoms may occur:

●The smart entry & start system (if equipped) and wireless remote control will

not function properly.

●The operational range will be reduced.

WARNING

■Removed battery and other parts

These parts are small and if swallowed by a child, they can cause choking.

Keep away from children. Failure to do so could result in death or serious

injury.

■Certification for the electronic key battery

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT

TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

7

NOTICE

■For normal operation after replacing the battery

Observe the following precautions to prevent accidents:

●Always work with dry hands.

Moisture may cause the battery to rust.

●Do not touch or move any other component inside the remote control.

●Do not bend either of the battery terminals.

Maintenance and care -> AC filter / Key battery for Your Toyota Aygo SUV Second Generation (2015-2021)

Related Topics

Maintenance and care

Popular Owner Manuals

Latest Owner Manuals