Maintenance and care -> Hood / Floor jack for Your Toyota Aygo SUV Second Generation (2015-2021)

356  
7-3. Do-it-yourself maintenance  
Hood  
Release the lock from the inside of the vehicle to open the hood.  
Pull the hood lock release lever.  
The hood will pop up slightly.  
Left-hand drive vehicles  
Right-hand drive vehicles  
Push the auxiliary catch lever to  
the left and lift the hood.  
Hold the hood open by inserting  
the supporting rod into the slot.  
To insert the support rod into the  
slot, move it as shown in the illus-  
tration. If it is moved to the side or  
toward the outside of the vehicle, it  
may become detached.  
 
357  
7-3. Do-it-yourself maintenance  
WARNING  
Pre-driving check  
Check that the hood is fully closed and locked.  
If the hood is not locked properly, it may open while the vehicle is in motion  
and cause an accident, which may result in death or serious injury.  
After installing the support rod into the slot  
Make sure the rod supports the hood securely from falling down on to your  
head or body.  
When detaching the support rod from the clip  
Take care to prevent hands or arms from being hit against the inside of the  
engine hood. Failure to do so may result in serious injury.  
Hold the support protector area to pre-  
vent burns.  
Support protector  
NOTICE  
When closing the hood  
Be sure to return the support rod to its clip before closing the hood. Closing  
the hood with the support rod up could cause the hood to bend.  
7
 
358  
7-3. Do-it-yourself maintenance  
Positioning a floor jack  
When using a floor jack, follow the instructions in the manual  
provided with the jack and perform the operation safely.  
When raising your vehicle with a floor jack, position the jack cor-  
rectly. Improper placement may damage your vehicle or cause  
injury.  
Front  
Rear