426
6-4. Using the other interior features
6-4.Using the other interior features
tion has stopped completely.
*
Electronic sunshade
●The electronic sunshade may
operate in reverse if the electronic
sunshade is subject to an impact
due to the surroundings or the
driving conditions.
*
: If equipped
Use the overhead switches
to operate the electronic
sunshade.
■When the electronic sunshade
does not close normally
Perform the following initialization
procedure.
Operating the electronic
sunshade
1 Turn the power switch to ON.
2 Press and hold the “CLOSE”
side of the switch.
It closes until it is near the fully
closed position and then stops. After
that, it operates in the opening
direction then closes to the fully
closed position.
If the switch is released at the incor-
rect time, the procedure will have to
be performed again from the begin-
ning.
1 Open*
2 Close*
: To stop the electronic sunshade
partway, lightly press the either
end of the switch.
If the automatic opening and closing
function does not work normally
even after performing the operations
above, have the vehicle inspected
by your Toyota dealer.
*
WARNING
■The electronic sunshade can be
operated when
Observe the following precau-
tions.
Failure to do so may result in
death or serious injury.
The power switch is in ON.
■Jam protection function for the
electronic sunshade
●If an object becomes jammed
between the electronic sunshade
and the sunshade frame while the
electronic sunshade is closing, the
electronic sunshade movement is
stopped and the electronic sun-
shade is opened slightly.
●When the jam protection function
has operated, even if the
“CLOSE” side of the switch is
pressed again, the electronic sun-
shade will not move in the close
direction until the reverse opera-
Owners Manual_USA_M42C01_en