Get Interior features -> Garage door opener Guide for Toyota bZ4X SUV Second Generation (2025-2026)

439

6-4. Using the other interior features

*

 Vehicles with auto anti-glare

Garage door opener

inside rear view mirror

*

: If equipped

The garage door opener can

be programmed using the

HomeLink^®to operate

garage doors, gates, entry

doors, door locks, home

lighting systems, security

systems, and other devices.

HomeLink^®indicator light

®

■HomeLink programming pro-

Garage door operation indi-

cators

HomeLink^®icon

cedure

The programming procedures can

also be found at the following URL.

®

Illuminates while HomeLink is

operating.

Buttons

 Vehicles with Digital Rear-

6

view Mirror

For support, contact customer sup-

port at the following.

Help Line: 1-800-355-3515

System components

The HomeLink^®wireless control

system in your vehicle has 3

buttons which can be pro-

grammed to operate 3 different

devices. Refer to the program-

ming methods on the following

pages to determine the method

which is appropriate for the

device.

HomeLink^®indicator light

Illuminates above each button

selected.

HomeLink^®icon

Owners Manual_USA_M42C01_en

440

6-4. Using the other interior features

Garage door operation indi-

cators

HomeLink^®logo

■Conforming to federal safety

standards

®

Do not use the HomeLink com-

patible transceiver with any

garage door opener or device that

lacks safety stop and reverse fea-

tures as required by federal safety

standards.

®

Appears while HomeLink is oper-

ating.

®

When the HomeLink button is

This includes any garage door

that cannot detect an interfering

object. A door or device without

these features increases the risk

of death or serious injury.

pressed, the logo disappears even

®

while the HomeLink is operating.

Setting icon

Press the menu button to change

the setting.

■When operating or program-

®

ming HomeLink

Menu buttons

Never allow a child to operate or

®

HomeLink^®buttons

play with the HomeLink buttons.

■Codes stored in the Home-

Link memory

®

Programming HomeLink

®

●The registered codes are not

erased even if the 12-volt battery

cable is disconnected.

■ Before programming Home-

Link^®

●If learning failed when registering

a different code to a HomeLink

button that already has a code

registered to it, the already regis-

tered code will not be erased.

 During programming, it is pos-

sible that garage doors,

gates, or other devices may

operate. For this reason,

make sure that people and

objects are clear of the

®

■Certification

P.624

garage door or other devices

to prevent injury or other

potential harm.

WARNING

■When programming a garage

door or other remote control

device

 It is recommended that a new

battery be placed in the

The garage door or other device

may operate, so ensure people

and objects are out of danger to

prevent potential harm.

remote control transmitter for

successful programming.

 Garage door opener motors

manufactured after 1995 may

be equipped with rolling code

protection. If this is the case,

you may need a stepladder or

other sturdy, safe device to

Owners Manual_USA_M42C01_en

441

6-4. Using the other interior features

reach the “Learn” or “Smart”

button on the garage door

opener motor.

(25 to 75 mm) from the

HomeLink^®buttons.

®

Keep the HomeLink indicator light

in view while programming.

■ Programming HomeLink^®

Steps 2 through 4 must be per-

formed within 60 seconds, oth-

erwise the HomeLink^®indicator

light will stop flashing and pro-

gramming will not be success-

fully completed.

1 Vehicles with Digital Rear-

view Mirror: Press the Home-

Link^®button or menu button

4 Program a device.

®

When the HomeLink button is

pressed:

Homelink Training Tutorial will be

displayed to assist you program-

®

ming the HomeLink .

®

When Homelink Training Tutorial

is displayed, follow the instructions

displayed.

6

When the menu button is pressed:

 Programming a device other

than an entry gate (for U.S.A.

owners)

Press the menu button

and

®

select the “Set Up >”. Homelink

Training Tutorial will be displayed to

assist you programming the Home-

Press and hold the remote con-

trol transmitter button until the

®

Link .

®

HomeLink^®indicator light

changes from slowly flashing

orange to rapidly flashing green

(rolling code) or continuously lit

green (fixed code), then release

the button.

When Homelink Training Tutorial

is displayed, follow the instructions

displayed.

2 Press and release the Home-

Link^®button you want to pro-

gram and check that the

HomeLink^®indicator light

flashes (orange).

 Programming an entry gate

(for U.S.A. owners)/Program-

ming a device in the Cana-

dian market

3 Point the remote control

transmitter for the device at

the rear view mirror, 1 to 3 in.

Press and release the remote

Owners Manual_USA_M42C01_en

442

6-4. Using the other interior features

control transmitter button at 2

second intervals, repeatedly,

■ Programming a rolling code

system

until the HomeLink^®indicator

light changes from slowly flash-

ing orange to rapidly flashing

(green) (rolling code) or continu-

ously lit (green) (fixed code).

5 Test the HomeLink^®opera-

tion by pressing the newly

programmed button and

Two or more people may be

needed to complete rolling code

programming.

1 Locate the “Learn” or “Smart”

button on the garage door

opener motor in the garage.

This button can usually be found

where the hanging antenna wire is

attached to the unit. The name and

color of the button may vary by

manufacturer. Refer to the owner’s

manual supplied with the garage

door opener motor for details.

observing the HomeLink^®

indicator light:

 HomeLink^®indicator light illu-

minates: Programming of a

fixed code device has com-

pleted. The garage door or

other device should operate

when a HomeLink^®button is

pressed and released.

 HomeLink^®indicator light

flashes rapidly: The garage

door opener or other device is

equipped with a rolling code.

To complete programming,

firmly press and hold the

2 Press and release the

“Learn” or “Smart” button.

Perform 3 within 30 seconds after

performing 2.

HomeLink^®button for 2 sec-

onds then release it.

 If the garage door or other

device does not operate, pro-

ceed to “Programming a roll-

ing code system”.

6 Repeat the steps above to

program another device for

any of the remaining Home-

3 Press and hold the desired

HomeLink^®button (inside the

vehicle) for 2 seconds and

release it. Repeat this

Link^®buttons.

Owners Manual_USA_M42C01_en

443

6-4. Using the other interior features

Link^®, both garage door

sequence

(press/hold/release) up to 3

times to complete program-

ming.

If the garage door opener

motor operates when the

operation indicators will flash

rapidly (green) and the light

on the garage door opener

motor will blink twice, indicat-

ing that 2-way communica-

tion is enabled.

HomeLink^®button is

pressed, the garage door

opener motor recognizes the

HomeLink^®signal.

If the indicators do not flash, per-

form 2 and 3 within the first 10

®

presses of the HomeLink button

after programming has been com-

pleted.

2 Press a programmed Home-

Link^®button to operate a

garage door.

3 Within 1 minute of pressing

the HomeLink^®button, after

the garage door operation

has stopped, press the

■ Enabling 2-way communi-

cation with a garage door

(only available for compati-

ble devices)

“Learn” or “Smart” button on

the garage door opener

motor. Within 5 seconds of

the establishment of 2-way

communication with the

garage door opener, both

garage door operation indica-

tors in the vehicle will flash

rapidly (green) and the light

on the garage door opener

motor will blink twice, indicat-

ing that 2-way communica-

tion is enabled.

6

When enabled, 2-way communi-

cation allows you to check the

status of the opening and clos-

ing of a garage door through

indicators in your vehicle.

2-way communication is only

available if the garage door

opener motor used is a compati-

ble device. (To check device

compatibility, refer to

■ Reprogramming a single

HomeLink^®button

1 Within 5 seconds after pro-

gramming the garage door

opener has been completed,

if the garage door opener

motor is trained to Home-

When the following procedure is

performed, buttons which

already have devices registered

to them can be overwritten:

Owners Manual_USA_M42C01_en

444

6-4. Using the other interior features

1 Press and hold the desired

Opening

Closing

HomeLink^®button.

2 When the HomeLink^®indica-

 Vehicles with Digital Rear-

tor starts flashing orange,

view Mirror

release the HomeLink^®but-

ton and perform “Program-

ming HomeLink^®” 1 (it takes

20 seconds for the Home-

Link^®indicator to start flash-

ing).

■Before programming

●Install a new battery in the trans-

mitter.

Opening

Closing

●The battery side of the transmitter

must be pointed away from the

®

HomeLink buttons.

This function is only available if the

garage door opener motor used is a

compatible device. (To check

device compatibility, refer to

®

Operating HomeLink

Press the appropriate Home-

Link^®button. The HomeLink^®

Color

Status

indicator light should turn on.

Orange (flash- Currently open-

ing)

ing/closing

The status of the opening and

closing of a garage door is

shown by the garage door oper-

ation indicators.

Opening/closing

has completed

Green

Feedback sig-

 Vehicles with auto anti-glare

Red (flashing) nals cannot be

received

inside rear view mirror

The indicators can operate

within approximately 820 ft. (250

m) of the garage door. However,

if there are obstructions

between the garage door and

the vehicle, such as houses and

trees, feedback signals from the

garage door may not be

received.

Owners Manual_USA_M42C01_en

445

6-4. Using the other interior features

To recall the previous door oper-

ation status, press and release

either HomeLink^®buttons

and

with auto anti-glare inside rear

view mirror), and

or and (vehicles

or

and

(vehicles

with Digital Rear-view Mirror)

simultaneously. The last

recorded status will be dis-

played for 3 seconds.

Erasing the entire Home-

®

Link memory (all three

codes)

Press and hold the 2 outside

buttons for 10 seconds until the

HomeLink^®indicator light

changes from continuously lit

(orange) to rapidly flashing

(green).

6

If you sell your vehicle, be sure to

erase the programs stored in the

®

HomeLink memory.

Owners Manual_USA_M42C01_en

446

6-4. Using the other interior features

Owners Manual_USA_M42C01_en

Interior features -> Garage door opener for Your Toyota bZ4X SUV Second Generation (2025-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals