CELICA
U
Checking headlight aims
Buble
Mark
Acceptable range
Acceptable range
Front
Front
The headlights have the beam angle
gauges to check:
Vertical movement gauges: The bubble on
the gauge should be within two marks
from center on both sides.
Horizontal movement gauges: The triangle
mark on the gauge should be within one
mark from the ”O” position.
1. Vertical movement
If a gauge reading is not within the ac-
ceptable range, have the aiming adjusted
by your Toyota dealer.
2. Horizontal movement
To obtain correct gauge readings, do
these before you check the headlight
aims.
D Make sure the body around the head-
light is not deformed.
D Park the vehicle on a level spot.
D Fill up the fuel tank.
D Bounce the vehicle several times.
A
passenger should sit on the driver’s
seat while checking the headlight aims.
185
English 