1993-1999 Toyota Celica 2 Door Electrical components -> Replacing light bulbs User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Electrical components -> Replacing light bulbs for Your Toyota Celica 2 Door Sixth Generation (1993-1999)

CELICA  
U
Replacing light bulbs—  
The following illustrations show how to  
gain access to the bulbs. When replacing  
a bulb, make sure the ignition switch and  
light switch are off. Use bulbs with the  
wattage ratings given in the table.  
Bulb  
No.  
Bulb  
No.  
Light bulbs  
W
Type  
C
Light bulbs  
W
Type  
Parking and front turn  
signal lights  
Personal lights  
Glovebox light  
5
E
D
D
—
—
—
1157 27/8  
194 3.8  
1.2  
3.8  
Front side marker  
lights  
CAUTION  
Door courtesy lights  
D
Luggage compartment  
light  
Rear side marker,  
stop and tail lights  
(coupe)  
5
E
D
—
—
Halogen bulbs have pressurized gas  
inside and require special handling.  
They can burst or shatter if scratched  
or dropped. Hold a bulb only by its  
plastic or metal case. Do not touch  
the glass part of a bulb with bare  
hands.  
1157 27/8  
C
D
Trunk light  
3.8  
A: HB4 halogen bulbs  
B: HB3 halogen bulbs  
C: Single end bulbs  
D: Wedge base bulbs  
E: Double end bulbs  
Rear side marker  
lights (liftback)  
194  
3.8  
27  
Rear turn signal lights  
Stop and tail lights  
Back−up lights  
1156  
C
C
C
D
C
1157 27/8  
1156  
168  
921  
27  
5
NOTICE  
License plate lights  
High mounted stoplight  
Only use a bulb of the listed type.  
18  
Interior light  
(with moon roof)  
10  
8
C
C
—
—
Bulb  
No.  
Light bulbs  
W
Type  
Interior lights  
(without moon roof)  
Headlights (low beam)  
9006  
55  
65  
55  
A
B
C
Headlights (high beam) 9005  
Front fog light  
—
186  
CELICA  
U
—Headlights  
1. Unplug the connector while depress-  
ing the lock release.  
2. Turn the bulb and remove it.  
3. Install a new bulb and the connector  
into the mounting hole.  
If the connector is tight, wiggle it.  
Aiming is not necessary after replacing  
the bulb. When aiming adjustment is nec-  
essary, contact your Toyota dealer.  
187  
CELICA  
U
—Front fog lights  
1. Loosen the retainer screw and take  
out the beam unit.  
2. Turn the cover counterclockwise and  
remove it.  
3. Disconnect the cords.  
188  
CELICA  
U
—Parking and front turn  
signal lights  
Use a Phillips−head screwdriver.  
4. Release the bulb retaining spring  
and remove the bulb. Install a new  
bulb and the bulb retaining spring.  
5. Connect the cords, install the cover  
and turn it clockwise so that two  
triangle marks are aligned. Plug the  
connector together. Install the beam  
unit and tighten the screw.  
To install the bulb, align the cutouts of the  
bulb with the protrusions of the mounting  
hole.  
189  
CELICA  
U
—Front side marker lights  
Use a Phillips−head screwdriver.  
190  
CELICA  
U
—Rear side marker, rear turn  
signal, stop and tail, and back−up  
lights (coupe and convertible)  
a: Rear turn signal light  
b: Rear side marker, stop and tail light  
c: Stop and tail light  
d: Back−up light  
191  
CELICA  
U
—Rear side marker, rear turn  
signal, stop and tail, and  
back−up lights (liftback)  
a: Rear side marker light  
b: Rear turn signal light  
c: Stop and tail light  
d: Back−up light  
192  
CELICA  
U
—High mounted stoplight  
(coupe)  
—License plate lights  
Use a Phillips−head screw driver.  
193  
CELICA  
U
—High mounted stoplight  
(liftback)  
194  

Related Topics

Popular Owner Manuals