CELICA
U
Ignition switch with steering
lock
Part 1
You must push in the key to turn the key
from ”ACC” to the ”LOCK” position. On
vehicles with an automatic transmission,
the selector lever must be in the ”P” posi-
tion before pushing the key.
OPERATION OF
INSTRUMENTS AND
CONTROLS—
When starting the engine, the key may
seem stuck at the ”LOCK” position. To
free it, first be sure the key is pushed all
the way in, and then rock the steering
wheel slightly while turning the key gently.
Chapter 1−6
Ignition switch,
Transmission and
Parking brake
CAUTION
For manual transmission:
”START”—Starter motor on. The key
will return to the ”ON” position when
released.
Never remove the key when the ve-
hicle is moving, as this will lock the
steering wheel and result in loss of
steering control.
D Ignition switch with steering lock
D Automatic transmission
D Manual transmission
D Parking brake
For starting tips, see Part 3.
”ON”—Engine on and all accessories
on.
NOTICE
D Cruise control
This is the normal driving position.
Do not leave the key in the ”ON”
position if the engine is not running.
The battery will discharge and the
ignition could be damaged.
”ACC”—Accessories such as the radio
operate, but the engine is off.
If you leave the key in the ”ACC” or
”LOCK” position and open the driver’s
door, a buzzer will remind you to remove
the key.
”LOCK”—Engine is off and the steering
wheel is locked. The key can be re-
moved only at this position.
67
English 
