1-2. Opening, closing and locking the doors and trunk
■ Setting and canceling the functions
To switch between set and canceled, follow the procedure below:
STEP
1
Vehicles with smart key system:
Close all the doors and switch the “ENGINE START STOP”
switch to IGNITION ON mode. (Perform the step 2 within 10
seconds.)
1
Vehicles without smart key system:
Close all the doors and switch the engine switch to the “ON”
position. (Perform step 2 within 10 seconds.)
Shift the shift lever to P or N, and
press and hold the driver's door
lock switch ( or ) for approx-
imately 5 seconds and then
release.
STEP
2
The shift lever and switch posi-
tions corresponding to the
desired function to be set or can-
celed are shown as follows.
Shift lever
position
Function
Switch position
Shift position linked door lock-
ing function*1
Shift position linked door
unlocking function*1
P
Speed linked door locking func-
tion*2
N
Driver's door linked door unlock-
ing function
*1: Vehicles with an automatic transmission only
*2: Vehicles with smart key system
When the setting or canceling operation is complete, all doors are
locked and then unlocked.
41