Get Interiorfeatures -> 3-3. Using the hands-free phone system (for cellular phone) Guide for Toyota Corolla 4 Door Ninth Generation (2007-2012)

3-3. Using the hands-free phone system (for cellular phone)

Hands-free phone system (for cellular phone) features (if equipped)

This system supports Bluetooth^®, which allows you to make or

receive calls without using cables to connect a cellular phone and

the system, and without operating the cellular phone.

Title

Page

Using the hands-free phone system

(for cellular phone)

P. 231

Making a phone call

P. 240

P. 244

P. 249

P. 253

Setting a cellular phone

Security and system setup

Using the phone book

■Conditions affecting operation

The hands-free phone system may not operate normally in the following situ-

ations:

●The cellular phone is turned off, or located outside the service area.

●The cellular phone has a low battery.

●The cellular phone is not connected to the system.

●The cellular phone is behind the seat or in the glove box, or metal mate-

rial covers or touches the phone.

■When transferring ownership of the vehicle

Be sure to initialize the system to prevent personal data from being improp-

erly accessed.

■Required profiles for the cellular phone

●HFP (Hands Free Profile) Ver. 1.0

●OPP (Object Push Profile) Ver. 1.1

228

3-3. Using the hands-free phone system (for cellular phone)

■Trademark owned by Bluetooth SIG. Inc.

■Certification for the hands-free phone system

FCC ID: ACJ932C5ZZZ035

IC ID: 216J-C5ZZZ035

MADE IN JAPAN

3

NOTE:

This device complies with Part 15 of the FCC Rules and RSS-210 of industry

Canada. Operation is subject to the following two conditions: (1) This device

may not cause harmful interference, and (2) This device must accept any

interference received, including interference that may cause undesired oper-

ation.

NOTICE:

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. How-

ever, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

●Reorient or relocate the receiving antenna.

●Increase the separation between the equipment and receiver.

●Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

●Consult the dealer or an experienced radio/TV technician for help.

229

3-3. Using the hands-free phone system (for cellular phone)

FCC WARNING:

Changes or modifications in construction not expressly approved by the

party responsible for compliance could void the user's authority to operate

the equipment.

CAUTION:

Radio Frequency Radiation Exposure

This equipment complies with FCC radiation exposure limits set forth for

uncontrolled equipment and meets the FCC radio frequency (RF) Exposure

Guidelines in Supplement C to OET65. This equipment has very low levels

of RF energy that it deemed to comply without maximum permissive expo-

sure evaluation (MPE). But it is desirable that it should be installed and oper-

ated with at least 20 cm and more between the radiator and person’s body

(excluding extremities: hands, wrists, feet and legs).

Co-location:

This transmitter must not be co-located or operated in conjunction with any

other antenna or transmitter.

CAUTION

■Caution while driving

Do not use a cellular phone, or connect the Bluetooth^®phone.

NOTICE

■To prevent damage to a cellular phone

Do not leave a cellular phone in the vehicle. The temperature inside may

become high resulting in damage to the phone.

230

3-3. Using the hands-free phone system (for cellular phone)

Using the hands-free phone system (for cellular phone) (if equipped)

■ Audio unit

Displays such items as

message, name, and phone

number

Lower-case

characters

and special characters,

such as an umlaut, can-

not be displayed.

Selects speed dials

Press and hold: Displays

information that is too long

to be displayed at one time

on the screen

3

Selects items such as menu

or number

Turn: Selects an item

Press: Inputs the selected

item

®

Displays Bluetooth

nection condition

con-

If BT is not displayed, the

hands-free phone sys-

tem cannot be used.

Displays the reception level

231

3-3. Using the hands-free phone system (for cellular phone)

■ Steering wheel

Volume

The voice guidance volume

cannot be adjusted by using

this button.

Hands-free phone system

on/starts a call (off-hook

switch)

Hands-free phone system

off/ends a call/refuses a call

(on-hook switch)

Press: Voice command sys-

tem on

Press and hold: Voice com-

mand system off (talk

switch)

232

3-3. Using the hands-free phone system (for cellular phone)

■ Microphone

Vehicles with moon roof

Vehicles without moon roof

3

233

3-3. Using the hands-free phone system (for cellular phone)

Operating the system by using a voice command

By following voice guidance instructions output from the speaker,

voice commands can be given to allow for operation of the hands-

free phone system without checking the display or operating

.

■ Operation procedure when using a voice command

Press the talk switch and say the command for a desired function.

(P. 236)

■ Auxiliary commands when using a voice command

The following auxiliary commands can be used when operating the

system using a voice command:

Cancel: Exits the hands-free phone system

Repeat: Repeats the previous voice guidance instruction

Go back: Returns to the previous procedure

Help: Reads aloud the function summary if a help comment is

registered for the selected function

234

3-3. Using the hands-free phone system (for cellular phone)

Using the hands-free phone system for the first time

Before using the hands-free phone system, it is necessary to register

a cellular phone in the system. The phone registration mode will be

entered automatically when starting the system with no cellular

phone registered. Follow the procedure below to register a cellular

phone:

STEP

1

Press the off-hook switch or the talk switch.

The introductory guidance and phone name registration instructions

are heard.

STEP

2

Register a phone name by either of the following methods.

3

a. Select “Record Name” by using

be registered.

, and say a name to

b. Press the talk switch and say a name to be registered.

A voice guidance instruction to confirm the input is heard.

STEP

3

Select “Confirm” by using a voice command or

.

A passkey is displayed and heard, and a voice guidance instruction

for inputting the passkey into the cellular phone is heard.

STEP

4

Input the passkey into the cellular phone.

Refer to the manual that comes with the cellular phone for the oper-

ation of the phone.

Guidance for registration completion is heard.

235

3-3. Using the hands-free phone system (for cellular phone)

Menu list of the hands-free phone system

■ Normal operation

Second

menu

First menu

Callback

Third menu

-

Operation detail

Dialing a number stored in

the incoming call history

memory

-

Dialing a number stored in

the outgoing call history

memory

Redial

-

Dial by

number

Dialing by inputting a number

Dial by

name

Dialing by inputting a name

registered in the phone book

-

Add Entry

Adding a new number

Change

Name

Changing a name in the

phone book

Delete

Entry

Deleting the phone book

data

-

Delete

Speed

Dial

(Del Spd

Dial)

Deleting a registered speed

dial

Phonebook

List

Names

Listing the phone book data

Registering a speed dial

Set

Speed

Dial

(Speed

Dial)

236

3-3. Using the hands-free phone system (for cellular phone)

Second

menu

First menu

Third menu

Set PIN

Operation detail

Setting a PIN code

Phonebook Lock

Locking the phone book

Security

Phonebook

Unlock

Unlocking the phone book

Registering the cellular

phone to be used

Pair Phone

Change Name

Delete

Changing a registered name

of a cellular phone

Deleting a registered cellular

phone

Phone

Setup

3

Setup

Listing the registered cellular

phones

List phones

Selecting a cellular phone to

be used

Select phone

Set Passkey

Changing the passkey

Guidance Vol-

ume

(Guidance Vol)

Setting voice guidance vol-

ume

System

Setup

Initialize

Initialization

237

3-3. Using the hands-free phone system (for cellular phone)

■ Using a short cut key

First menu

Second menu

-

Operation detail

Dialing a number registered

in the phone book

Dial “XXX (name)”

Phone book add

entry

-

Adding a new number

Changing the name of a

phone number in the phone

book

Phone book change

name

Phone book delete

entry

-

Deleting phone book data

Registering a speed dial

Deleting a speed dial

Phone book set

speed dial

Phone book delete

speed dial

Phonebook Unlock

Phonebook Lock

Unlocking the phone book

Locking the phone book

Phonebook

238

3-3. Using the hands-free phone system (for cellular phone)

■Automatic adjustment of volume

When vehicle speed is 50 mph (80 km/h) or more, the volume automatically

increases. The volume returns to the previous volume setting when vehicle

speed drops to 43 mph (70 km/h) or less.

■When using a voice command

For numbers, say a combination of single digits from zero to nine, # (pound),

 (star), and + (plus).

Say a command correctly and clearly.

■The system may not recognize your voice in the following situations:

●When driving on a rough road

●When driving at high speeds

3

●When air is blowing out of the vents onto the microphone

●When the air conditioning fan emits a loud noise

■The following cannot be performed while driving:

●Operating the system with

●Registering a cellular phone to the system

■Changing the passkey

P. 248

239

3-3. Using the hands-free phone system (for cellular phone)

Making a phone call

■ Making a phone call

● Dialing by inputting a number

“Dial by number”

● Dialing by inputting a name

“Dial by name”

● Speed dialing

● Dialing a number stored in the outgoing history memory

“Redial”

● Dialing a number stored in the incoming history memory

“Call back”

■ Receiving a phone call

● Answering the phone

● Refusing the call

■ Transferring a call

■ Using the call history memory

● Dialing

● Storing data in the phone book

● Deleting

Dialing by inputting a number

STEP

1

2

3

Press the talk switch and say “Dial by number”.

Press the talk switch and say the phone number.

Dial by one of the following methods:

a. Press the off-hook switch.

b. Press the talk switch and say “Dial”.

c. Select “Dial” by using

.

240

3-3. Using the hands-free phone system (for cellular phone)

Dialing by inputting a name

STEP

1

2

Press the talk switch and say “Dial by name”.

Select a registered name to be input by either of the following

methods:

a. Press the talk switch and say a registered name.

b. Press the talk switch and say “List names”. Press the talk

switch while the desired name is being read aloud.

STEP

3

Dial by one of the following methods:

a. Press the off-hook switch.

b. Press the talk switch and say “Dial”.

3

c. Select “Dial” by using

.

Speed dialing

STEP

1

2

Press the off-hook switch.

Press the preset button in which the desired number is regis-

tered.

STEP

3

Press the off-hook switch.

When receiving a phone call

■ Answering the phone

Press the off-hook switch.

■ Refusing the call

Press the on-hook switch.

241

3-3. Using the hands-free phone system (for cellular phone)

Transferring a call

A call can be transferred between the cellular phone and system

while dialing, receiving a call, or during a call. Use one of the follow-

ing methods:

a. Operate the cellular phone.

Refer to the manual that comes with the cellular phone for the oper-

ation of the phone.

*1

b. Press the off-hook switch .

*2

c. Press the talk switch and say “Call Transfer” .

*1

: This operation can be performed only when transferring a call

from the cellular phone to the system during a call.

*2

: While the vehicle is in motion, a call cannot be transferred from

the system to the cellular phone.

Using the call history memory

Follow the procedure below to use a number stored in the call history

memory:

STEP

1

Press the talk switch and say “Redial” (when using a number

stored in the outgoing call history memory) or “Call back”

(when using a number stored in the incoming call history

memory).

STEP

2

Select the number by either of the following methods:

a. Say “Previous” or “Go back” until the desired number is dis-

played.

b. Select the desired number by using

.

242

3-3. Using the hands-free phone system (for cellular phone)

The following operations can be performed:

Dialing: Press the off-hook switch or select “Dial” by using a voice

command or

Storing the number in the phone book: Select “Store” by using a

voice command or

.

Deleting: Select “Delete” by using a voice command or

.

3

■Call history

Up to 5 numbers can be stored in each of the outgoing and incoming call his-

tory memories.

■When talking on the phone

●Do not talk simultaneously with the other party.

●Keep the volume of the received voice down. Otherwise, voice echo will

increase.

243

3-3. Using the hands-free phone system (for cellular phone)

Setting a cellular phone

Registering a cellular phone in the hands-free phone system allows

the system to function. The following functions can be used for reg-

istered cellular phones:

■ Functions and operation procedures

To enter the menu for each function, follow the steps below by

using a voice command or

:

● Registering a cellular phone

1. “Setup”  2. “Phone Setup”  3. “Pair Phone”

● Selecting the cellular phone to be used

1. “Setup”  2. “Phone Setup”  3. “Select Phone”

● Changing a registered name

1. “Setup”  2. “Phone Setup”  3. “Change Name”

● Listing the registered cellular phones

1. “Setup”  2. “Phone Setup”  3. “List Phones”

● Deleting a cellular phone

1. “Setup”  2. “Phone Setup”  3. “Delete”

● Changing the passkey

1. “Setup”  2. “Phone Setup”  3. “Set Passkey”

Registering a cellular phone

Select “Pair Phone” by using a voice command or

, and do the

procedure for registering a cellular phone. (P. 235)

244

3-3. Using the hands-free phone system (for cellular phone)

Selecting the cellular phone to be used

STEP

1

Select “Select Phone” by using a voice command or

.

Pattern A

STEP

2

Select the cellular phone to be used by either of the following

methods, and select “Confirm” by using a voice command or

:

a. Press the talk switch and say the desired phone name.

b. Press the talk switch and say “List phones”. While the name

of the desired cellular phone is being read aloud, press the

talk switch.

3

Pattern B

STEP

2

Select the cellular phone to be used by using

.

Changing a registered name

STEP

1

2

Select “Change Name” by using a voice command or

.

Select the name of the cellular phone to be changed by either

of the following methods:

a. Press the talk switch and say the desired phone name, and

select “Confirm” by using a voice command or

.

b. Press the talk switch and say “List phones”. While the

desired phone name is being read aloud, press the talk

switch.

c. Select the desired phone name by using

.

245

3-3. Using the hands-free phone system (for cellular phone)

STEP

3

Press the talk switch or select “Record Name” by using

, and say a new name.

4

Select “Confirm” by using a voice command or

.

Listing the registered cellular phones

Selecting “List Phones” by using a voice command or

the list of registered cellular phones to be read aloud.

causes

When listing is complete, the system returns to “Phone Setup”.

Pressing the talk switch while the name of a cellular phone is being

read selects the cellular phone, and the following functions will be

available:

• Selecting a cellular phone: “Select Phone”

• Changing a registered name: “Change Name”

• Deleting a cellular phone: “Delete”

246

3-3. Using the hands-free phone system (for cellular phone)

Deleting a cellular phone

STEP

1

Select “Delete” by using a voice command or

.

Pattern A

STEP

2

Select the cellular phone to be deleted by either of the follow-

ing methods and select “Confirm” by using a voice command

or

:

a. Press the talk switch and say the name of the desired cellu-

lar phone.

3

b. Press the talk switch and say “List phones”. While the name

of the desired cellular phone is being read aloud, press the

talk switch.

Pattern B

STEP

2

Select the desired cellular phone to be deleted by using

.

247

3-3. Using the hands-free phone system (for cellular phone)

Changing the passkey

STEP

1

Select “Set Passkey” by using a voice command or

.

Pattern A

STEP

2

Press the talk switch, say a 4 to 8-digit number, and select

“Confirm” by using a voice command or

Pattern B

.

STEP

2

Select a 4 to 8-digit number by using

.

The number should be input 1 digit at a time.

STEP

3

When the entire number to be registered as a passkey has

been input, press once again.

■The number of cellular phones that can be registered

Up to 6 cellular phones can be registered in the system.

248

3-3. Using the hands-free phone system (for cellular phone)

Security and system setup

To enter the menu of each setting, follow the steps below:

■ Security setting items and operation procedure

● Setting or changing the PIN (Personal Identification Number)

1. “Setup”  2. “Security”  3. “Set PIN”

● Locking the phone book

1. “Setup”  2. “Security”  3. “Phonebook Lock”

● Unlocking the phone book

1. “Setup”  2. “Security”  3. “Phonebook Unlock”

■ System setup items and operation procedure

● Setting voice guidance volume

3

1. “Setup”  2. “System Setup”  3. “Guidance Vol”

● Initialization

1. “Setup”  2. “System Setup”  3. “Initialize”

can only be used for system setup operation.

Setting or changing the PIN

■ Setting a PIN

STEP

1

2

Select “Set PIN” by using a voice command or

Enter a PIN by using a voice command or

.

When using

, input the code 1 digit at a time.

249

3-3. Using the hands-free phone system (for cellular phone)

■ Changing the PIN

STEP

1

2

3

Select “Set PIN” by using a voice command or

Enter the registered PIN by using a voice command or

Enter a new PIN by using a voice command or

.

When using

, input the code 1 digit at a time.

Locking or unlocking the phone book

STEP

1

Select “Phonebook lock (Phbk Lock)” or “Phonebook unlock

(Phbk Unlock)” by using a voice command or

Input the PIN by either of the following methods and select

“Confirm” by using a voice command or

a. Press the talk switch and say the registered PIN.

b. Input a new PIN by using

.

STEP

2

:

.

250

3-3. Using the hands-free phone system (for cellular phone)

Setting voice guidance volume

STEP

1

2

Select “Guidance Vol” by using

Change the voice guidance volume.

.

To decrease the volume: Turn

To increase the volume: Turn

counterclockwise.

clockwise.

Initialization

3

STEP

1

2

Select “Initialize” and then “Confirm” by using

.

Select “Confirm” by using

.

251

3-3. Using the hands-free phone system (for cellular phone)

■Initialization

●The following data in the system can be initialized:

• Phone book

• Outgoing and incoming call history

• Speed dials

• Registered cellular phone data

• Security code

●Once the initialization has been completed, the data cannot be restored

to its original state.

■When the phone book is locked

The following functions cannot be used:

●Dialing by inputting a name

●Speed dialing

●Dialing a number stored in the call history memory

●Using the phone book

252

3-3. Using the hands-free phone system (for cellular phone)

Using the phone book

To enter the menu of each setting, follow the steps below:

● Adding a new phone number

1. “Phonebook”  2. “Add Entry”

● Setting speed dial

1. “Phonebook”  2. “Set Speed Dial (Speed Dial)”

● Changing a registered name

1. “Phonebook”  2. “Change Name”

● Deleting registered data

1. “Phonebook”  2. “Delete Entry”

● Deleting speed dial

3

1. “Phonebook”  2. “Delete Speed Dial (Del Spd Dial)”

● Listing the registered data

1. “Phonebook”  2. “List Names”

Adding a new phone number

The following methods can be used to add a new phone number:

● Inputting a phone number by using a voice command

● Transferring data from the cellular phone

● Inputting a phone number by using

● Selecting a phone number from outgoing or incoming call history

253

3-3. Using the hands-free phone system (for cellular phone)

■ Adding procedure

STEP

1

2

Select “Add Entry” by using a voice command or

.

Use one of the following methods to input a telephone num-

ber:

Inputting a telephone number by using a voice command

STEP2-1 Select “By Voice” by using a voice command or

.

STEP2-2 Press the talk switch, say the desired number, and

select “Confirm” by using a voice command.

Transferring data from the cellular phone

STEP2-1 Select “By Phone” and then “Confirm” by using a

voice command or

.

STEP2-2 Transfer the data from the cellular phone.

Refer to the manual that comes with the cellular phone for

the details of transferring data.

STEP2-3 Select the data to be registered by either of the fol-

lowing methods:

a. Say “Previous” or “Next” until the desired data is

displayed, and select “Confirm” by using a voice

command.

b. Select the desired data by using

.

254

3-3. Using the hands-free phone system (for cellular phone)

Inputting a phone number by using

STEP2-1 Select “Manual Input” by using

.

STEP2-2 Input a phone number by using

once again.

, and press

Input the phone number 1 digit at a time.

Selecting a phone number from outgoing or incoming call history

STEP2-1 Select “Call History” by using a voice command or

3

.

STEP2-2 Select “Outgoing” or “Incoming” by using a voice

command or

.

STEP2-3 Select the data to be registered by either of the fol-

lowing methods:

a. Say “Previous” or “Go back” until the desired data

is displayed, and select “Confirm” by using a

voice command.

b. Select the desired data by using

.

255

3-3. Using the hands-free phone system (for cellular phone)

STEP

3

Select the name to be registered by either of the following

methods, and select “Confirm” by using a voice command or

:

a. Press the talk switch and say the desired name.

b. Select “Record Name” by using

desired name.

, and say the

STEP

4

Select “Confirm” by using a voice command or

.

STEP

3

In

, selecting “Set Speed Dial (Speed Dial)” instead of “Con-

firm” registers the newly added phone number as a speed dial.

Setting speed dials

STEP

1

Select “Set Speed Dial (Speed Dial)” by using a voice com-

mand or

.

STEP

2

Select the data to be registered as a speed dial by either of

the following methods:

a. Press the talk switch, say desired number, and select “Con-

firm” by using a voice command or

.

b. Press the talk switch, and say “List names”. While the

desired name is being read aloud, press the talk switch,

and select “Confirm” by using a voice command or

.

c. Select the desired data by using

.

256

3-3. Using the hands-free phone system (for cellular phone)

STEP

3

Select the desired preset button, and register the data into

speed dial by either of the following methods:

a. Press the desired preset button, and select “Confirm” by

using a voice command or

b. Press and hold the desired preset button.

Changing a registered name

.

STEP

1

2

Select “Change Name” by using a voice command or

.

3

Select the name to be changed by either of the following

methods.

a. Press the talk switch, say desired name, and select “Con-

firm” by using a voice command or

.

b. Press the talk switch, and say “List names”. While the

desired name is being read aloud, press the talk switch,

and select “Confirm” by using a voice command or

.

c. Select the desired name by using

.

STEP

3

4

Select “Record Name” with

Say a new name, and select “Confirm” by using a voice com-

mand or

or the talk switch.

.

257

3-3. Using the hands-free phone system (for cellular phone)

Deleting registered data

STEP

1

Select “Delete Entry” by using a voice command or

.

Pattern A

STEP

2

Select the data to be deleted by either of the following meth-

ods, and select “Confirm” by using a voice command or

:

a. Press the talk switch, and say the name of the desired

phone number to be deleted.

b. Press the talk switch, say “List phones”. While the name of

the desired phone number is being read aloud, press the

talk switch.

Pattern B

STEP

2

Select the data to be deleted by using

.

Deleting speed dials

STEP

1

Select “Delete Speed Dial (Del Spd Dial)” by using a voice

command or

.

STEP

2

Press the preset button in which the desired speed dial is reg-

istered, and select “Confirm” by using a voice command or

.

258

3-3. Using the hands-free phone system (for cellular phone)

Listing the registered data

Selecting “List names” by using a voice command causes a list of the

registered data to be read aloud.

When listing is complete, the system returns to “Phonebook”.

Pressing the talk switch while the desired data is being read aloud

selects the data, and the following function will be available.

• Dialing: “Dial”

• Changing a registered name: “Change Name”

• Deleting an entry: “Delete Entry”

• Setting a speed dial: “Set Speed Dial (Speed Dial)”

3

■Limitation of number of digits

A phone number that exceeds 24 digits cannot be registered.

259

Interiorfeatures -> 3-3. Using the hands-free phone system (for cellular phone) for Your Toyota Corolla 4 Door Ninth Generation (2007-2012)

Related Topics

Interiorfeatures

Popular Owner Manuals

Latest Owner Manuals