Get Interiorfeatures -> Using the radio Guide for Toyota Corolla 4 Door Ninth Generation (2007-2012)

3-2. Using the audio system

Using the radio

Power Volume

Changing the channel

Adjusting the frequency (AM, FM

mode) or channel (SAT mode)

3

Scanning for

receivable stations

Station selector

Displaying radio text

messages

AMSAT/FM

mode buttons

Seeking the frequency

®

Setting station presets (excluding XM Satellite Radio)

STEP

1

Search for desired stations by turning

or pressing “”

or “” on

.

STEP

2

Press and hold the button (from

to

) the station

is to be set to until you hear a beep.

®

Scanning radio stations (excluding XM Satellite Radio)

■ Scanning the preset radio stations

STEP

1

Press and hold

until you hear a beep.

Preset stations will be played for 5 seconds each.

2

When the desired station is reached, press

again.

once

201

3-2. Using the audio system

■ Scanning all radio stations within range

STEP

1

Press

.

All stations with reception will be played for 5 seconds each.

STEP

2

When the desired station is reached, press

again.

once

®

XM Satellite Radio* (if equipped)

®

■ Receiving XM Satellite Radio

STEP

1

Press

.

The display changes as follows each time

pressed.

is

AM  SAT1  SAT2  SAT3

STEP

2

Turn

to select the desired channel from all categories

or press “” or “” on

to select the desired channel in

the current category.

®

■ Setting XM Satellite Radio channel presets

Select the desired channel. Press and hold the button (from

to

) the channel is to be set to until you hear a beep.

■ Changing the channel category

Press “” or “” on

.

202

3-2. Using the audio system

®

■ Scanning XM Satellite Radio channels

● Scanning channels in the current category

STEP

1

2

Press

.

When the desired channel is reached, press

again.

● Scanning preset channels

STEP

1

2

Press and hold

until you hear a beep.

When the desired channel is reached, press

again.

■ Displaying text information

Press

.

3

The display will show up to 10 characters.

The display changes as follows each time the button is pressed.

● CH NAME

● TITLE (SONG/PROGRAM TITLE)

● NAME (ARTIST NAME/FEATURE)

● CH NUMBER

*: Except JBL brand audio system

Use of XM^®Satellite Radio requires XM^®tuner and service.

Contact your Toyota dealer.

203

3-2. Using the audio system

■When the battery is disconnected

Station presets are erased.

■Reception sensitivity

●Maintaining perfect radio reception at all times is difficult due to the con-

tinually changing position of the antenna, differences in signal strength

and surrounding objects, such as trains, transmitters, etc.

●The radio antenna is mounted inside the rear window. To maintain clear

radio reception, do not attach metallic window tinting or other metallic

objects to the antenna wire mounted inside the rear window.

■XM^®Satellite Radio

An XM^®Satellite Radio is a tuner designed exclusively to receive broadcasts

provided under a separate subscription. Availability is limited to the 48 con-

tiguous states and 10 Canadian provinces.

●XM^®subscriptions

For detailed information about XM^®Satellite Radio or to subscribe:

U.S.A. 

Visit on the web at www.xmradio.com or call 1-800-967-2346.

Canada 

Visit on the web at www.xmradio.ca or call 1-877-438-9677.

●Radio ID

You will need the radio ID when activating XM^®service or reporting a

problem. Select “CH000” using

, and the receiver's 8-character ID

number will appear.

●Satellite tuner

The tuner supports only Audio Services (Music and Talk) and the accom-

panying Text Information of XM^®Satellite Radio.

204

3-2. Using the audio system

■If XM^®Satellite Radio does not operate normally

If a problem occurs with the XM^®tuner, a message will appear on the dis-

play. Refer to the table below to identify the problem, and take the suggested

corrective action.

The XM^®antenna is not connected. Check

whether the XM^®antenna cable is attached

securely.

ANTENNA

There is a short-circuit in the antenna or the sur-

rounding antenna cable. See a Toyota certified

dealer.

You have not subscribed to XM^®Satellite Radio.

The radio is being updated with the latest encryp-

tion code. Contact XM^®Satellite Radio for sub-

scription information. When a contract is canceled,

you can choose the “CH000” and all free-to-air

3

channels.

UPDATING

The premium channel you selected is not autho-

rized. Wait for about 2 seconds until the radio

returns to the previous channel or “CH001”. If it

does not change automatically, select another

channel. If you want to listen to the premium chan-

nel, contact XM^®Satellite Radio.

The XM^®signal is too weak at the current location.

NO SIGNAL

Wait until your vehicle reaches a location with a

stronger signal.

The unit is acquiring audio or program information.

Wait until the unit has received the information.

LOADING

OFF AIR

The channel you selected is not broadcasting any

programming. Select another channel.

There is no song/program title or artist name/fea-

ture associated with the channel at this time. No

action needed.

-----

205

3-2. Using the audio system

The channel you selected is no longer available.

Wait for about 2 seconds until the radio returns to

the previous channel or “CH001”. If it does not

change automatically, select another channel.

---

Contact the XM^®Listener Care Center at 1-800-967-2346 (U.S.A.) or 1-877-

438-9677 (Canada).

■Certifications for the radio tuner

This equipment has been tested and found to comply with the limits for a

class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. How-

ever, there is no guarantee that interference will not occur in a particular

installation.

If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by trying one or more of

the following:

●Reorienting or relocating the receiving antenna.

●Increasing the separation between the equipment and receiver.

●Connecting the equipment into an outlet on a circuit different from that to

which the receiver is connected.

●Consulting the dealer or an experienced radio/TV technician for help.

206

Interiorfeatures -> Using the radio for Your Toyota Corolla 4 Door Ninth Generation (2007-2012)

Related Topics

Interiorfeatures

Popular Owner Manuals

Latest Owner Manuals